The Census website claims that companies who refuse to turn over the information could face a fine of up to $5000?

There was a guy with a gun and they opened fire while disregarding the people in the background.


Most important thing to the cops.
From the article....
"No officers were injured, the department tweeted. "

The Dept is referring to the other people shot (most likely by cops) as "victims" since it helps the narrative that the bad guy (if he really was a bad guy) shot them all.

Just as NYC tried to do when cops opened fire on an armed guy on a busy street. NINE bystanders were wounded and the story was the bad guy did it. Until the medical records showed they were ALL hit by 9mm bullets and the bad guy was shooting a .45. Guess who had 9mm pistols in that instance? Had the bad guy been carrying a 9mm that day cops would have pinned every wounded person on him.

Anybody surprised?

Have a vudoo gen2 barreled action 18” kukri fluted barrel. Just barreled action. Has only 50 rounds of center x down the barrel. Basically brand new action. Need to get this sold. 1550 shipped. Not going any lower. Please don’t ask.

Instead of a bunch of cowards. Good work officer.

Houston cop lauded for thwarting potential mass shooting ...​

https://www.foxnews.com › houston-cop-lauded-thwartin...



4 hours ago — Houston Police Sgt. Kendrick Simpo is being lauded as a hero after thwarting a potential mass shooting at a mall where hundreds of children ...

Moving somewhere with a good 1,000+ yard range, figure it’s time to dive into both reloading and building the 6BRA PRS I’ve been meaning to.

Is the 737 action (steel) still the go to?

I’d go bartlein 400MODBB but their turn around time is…long, thinking PVA

Gain twist or left hand, best contour ?

Thinking jewel trigger and ether a MPA competition or that new KRG chassis when it comes out


Anything I’m missing here or should change?

Optics wise going to be a USO fdn.

Had a V2 and upgraded to V3 with Bluetooth
Area 419 upgrade as shown.
$350.00 shipped, all parts shown goes with it

Selling a Nightforce ATACR 4-16x42 with Mil XT reticle. Will come with box, paperwork and Vortex PMR 1.26 rings. Small scratch on top of elevation turret, glass is perfect. I will get some pictures posted later today. Asking $2000 shipped for scope and rings.

I’m a fan of the original RE games and the two remakes of the originals, but didn’t care for any of the Mika movies. The newest one outside of the Mila films was eh but better than the previous ones.

But this new series…

Fuck, could they get you to hate the main character (let alone most of the characters) any more? Absolutely terrible characters and holy shit could they be any more accommodating for every single progressive cliche.

I watched it to see what they did with the storyline, which was noting but overreaching fan service, but holy fuck that was terrible.

The story in the first three games was great. That’s all they literally have to follow if they want an easy trilogy but instead RE fans get this trash on top of ____ number of Mila films?

Its funny because RT shows it having a high score from critics but a terrible score from actual viewers.

Save yourselves.

I'm new to mandrels. If I just want to run the mandrel through virgin brass , or run through sized brass to get a little better and more consistent neck tension, can I just lube the mandrel amd what kind of lube? I've read so much about it all that I'm just confused now. Dry lube galling, ect...

I don't want to have to tumble it after

I have decided to give the Rim X another try after having FTF, and feeding issues with my first one a wile back. In that rifle I had a Timney 2 stage and ended up having to trim the cocking piece to resolve the FTF from excessive drag on the sear.

This time around I asked you guys what triggers you were using and I called Ray @ Zermatt. Ready said they build their actions for Trigger Tech triggered and that also seemed popular amongst those who contributed to my initial question. So I ordered a new Diamond 2 stage.

After installing it I found the bolt was pretty hard to close and the trigger has a bad hard spot to get through in order to make the shoe start moving in the 1st stage. I inspected everything and didn't see anything odd so I swapped the Diamond from my Vudoo (which has been perfect from the get go) into the Rim X and put the one from the Rim X into the Vudoo. The symptoms stayed with the Rim X.

Having been here before I knew I needed to reduce the height of the cocking piece in the bolt. I took 0.027" off the cocking piece checking it every 0.005". The bolt is easier to close but that damn catch / hard spot is still in the trigger. I put 100-120 rounds through it today after the reduction of the cocking piece and had no failure to fire but the trigger kinda sucks (no fault of the trigger).

Has anyone ran into this with this combo? If so what was your solution? I am going to remove more material from the cocking piece but almost 0.030" is a lot!

Also when I manual depress the sear and break the trigger it feels fine. It's just when it's in the Rim X action and not in the Vudoo. That's with 2 different triggers.

Thank you in advance for your help and thoughts. Oh, and yes I am going to call Zermatt Monday. I'm just trying to sort this out now if I can.

It's definitely used but not abused. Bought from another member, decided to go in a different direction.

MLOK slots have a good amount of wear / marring due to a DIY weight kit that's since been removed.

I'm thinking $600 with the three 308/6.5 Creedmoor/6mm Creedmoor CTR mags shipped sounds fair, or $475 without?

Optic rail and hardware included.

Rail is configured for a T3X, but can be made to work with a T3. Difference is in the hole in the receiver top on a T3X allows included rail recoil pins to work.

Wondering if anyone has experience with robot vacuums. The wife is talking about looking at them as age has started to take its toll. We are not invalids by any means but a little automation would be welcome if they work. Any guidance and recommendations would be welcome. Thanks.

Bushnell Elite Tactical DMR 3.5-21x50 with sunshade. G2DMR reticle. Model # ET35215G. I do have the box.

Like new condition. I don't see any scratches or ring marks on this one. Has just been sitting and I doubt I'll ever get around to using it

Link to specs below.

$SOLD shipped CONUS.

Selling off my Bergara B14r 22lr steel barreled action. Comes with an Area 419 30 MOA rail, Area 419 bolt knob, Bergara trigger and 3-10 round mags. Barrel is threaded 1/2x28 and the barreled action is cerakoted graphite black.

It shot sub 1/2” groups at 50 yards with SK standard.

$700 shipped to your FFL

Accept Venmo or Guntab

Up for sale is:

1 Armageddon Gear Kestrel Pocket w/ ITS Nexus Tac Link (Brand New)
$39 shipped

1 Armageddon Gear 10 round Adjustable AICS/AW Mag Pouch (Brand New)
$35 shipped

1 Mdt follower and spring for extended .308 AICS style mags (Brand New)
$15 shipped

Take everything for $69 shipped to lower 48

PICS BELOW

( All prices are shipped to lower 48 only)

Curious as to how many have a back up 22 for when you go to shoot competitively?

For sale is my early, rare Patent Pending marked LMT CQB upper.
Upper includes 11.5” LMT barrel, charging handle, LMT Enchance bcg, and LMT buis.

$1200 Shipped

CLOSED FOR LACK OF INTEREST

I’m in the market for a new 1911, and prefer Les Baer. Last one I bought was in 2017, and have no complaints.

Has anyone purchased a Les Baer in the last two years? Are they still good quality? I see they aren’t the same good value price they used to be, but if quality is still there then I’d still buy.

I’m trying decide if I want to order new from Les or if I should go look on the used market for an older gun.

Thanks!

Yea, paying Snookie to campaign for you.
Now there is a lock on credibility.
Da fuck she ever done but spread her legs and snivel ?

Login to view embedded media

Several items for sale.

Gitzo 3541xls tripod in great shape. I'll attach a link for it's specs. I've had it a while and it's outstanding. If you don't know the Gitzo name do some research, they are top notch. SOLD obo shipped

Brass Anarchy for foundation. SOLD shipped.

Foundation full length standard arca rail. SOLD shipped.

Armageddon Gear tripod caddy in great shape. SOLD obo shipped.

TAB tripod shelf. SOLD shipped.

Ckyepod G2 with Atlas rubber feet, standard length with ARCA knob on left side for a right handed shooter. 500 obo shipped.

Sikes clutch, basically new. SOLD shipped.

Probably need to watch this one:


For the slow people, read above the line.