Lightly used, put this together, but I'm getting out of competition shooting. There are very light scratches on the stock barely noticeable in some areas especially in the shadow or indoors, can only be seen primarily outdoors (thus outdoor pics b/c I don't hide anything).
Component list:
-Impact 737 action SA 308 BF $1430 New
-Foundation MG2 Dark Distressed inlet for 737R (took a bunch of pics so you can try to see the actual color it looks very nice in person IMO) w/ Hawkins DBM foundation full length rail: $1608 total on foundation stocks right now.
-Stuteville 6BRA barrel 26" 1:7.5, 274 neck, 270 rounds exactly, 5/8-24 muzzle threads, Countour I believe is M24/MTU, measures 1.200 shank end (this is M24) but muzzle end is .930 (which is MTU), Bartlein blank I'm quite sure but Stuteville doesn't always say. Load: 31.2gr Varget, Berger 105 hybrid, 2932 fps SD 3.03, ES 4, NO pressures signs at all. Shoots .226-.268 MOA groups per my records. $875 on impacts website
-Triggertech Diamond $315 MSRP (no one pays this lets be real)
-APA Gen 3 little bastard nitrided $137 on sale right now on APAs website
-Bronze weight kit #22 (used caulk to easily remove): $110

So basically put together this is $4525 (w/o any shipping costs which ALL of these guys above charge) So your easily looking at $4650 shipped if you were to buy this from the above shops after shipping.

Update: Foundation sold… along with dbm weights and rail.

-For now the barreled action w/ muzzle brake and TT diamond MUST stay together: $OLD shipped insured
-6BRA stuteville barrel MUST go first: $OLD shipped
-Impact 737 Action (low round count 270 this is my backup action from competition days): $OLD shipped
-APA muzzle brake genIII (only 270 rounds on it): $OLD shipped
-Triggertech Diamond $235 shipped
-The Foundation Stock, Hawkins DBM, weight kit, foundation rail must also stay together: $OLD shipped insured

If you buy the entire setup I will ship things separately (i.e. barreled action to your FFL and rest to you directly).

Payment we can talk about but I got stellar feedback and known for being critical w/ any cosmetic imperfections. I'm older but not blind.... yet.

Welcome aboard Holton Township, of Muskegon County Michigan, to the 2nd Amendment Sanctuary network:



MORE:


----------
----------
Similar to Livingston County, which last April passed a resolution naming it what’s been dubbed a Second Amendment Sanctuary, Holton’s resolution declares the township will not enforce red-flag laws restricting gun and ammunition possession.

“Whereas, the Holton Township Board declares and confirms to express its intent to stand as a Sanctuary Township for Second Amendment rights, and to oppose, within the limits of the Constitution of the United States and the Commonwealth of Michigan, any efforts to unconstitutionally restrict such rights,” the resolution reads.

The board’s resolution also included an addendum to form a militia.

The Militia Public Security Act states the township is adopting “policies necessary for the security and rights of Holton Township residents.”

Legal residents of Holton Township with primary residency in the township are eligible to join the militia and may make their intentions known by acknowledging their intent on social media, explicitly telling friends or family members they wish to join, or stating their intent by letter to the Township Militia.

Several restrictions are explicitly stated in the addendum, including:

Candidates must be over the age of 18.

Candidates must pass a federal firearms background check.

Resident not desiring to be in the militia are not required to join.
----------
----------

Marlin 1895SS. 45-70 with Ranger Point scope rail built in rear sight thumb hammer extension added

Marling built JM barrel stamp
New Haven CT

$1150 shipped
Scope not included

I have the following items for sale, prices include insured shipping:

• 20” 6mm ARC Proof Research CF Barrel w/ Gas Block, Gas Tube, and Grendel Hunter Bolt, Round Count ~250ish - $600
• Used Cross Machine 15” DRT Handguard w/ Integrated ARCA Rail (Has some scratches on the ARCA rail)- $150
• Lightly Used Larue LT104 Scope Mount (includes 30mm and 35mm rings) - $185
• Magpul PRS Stock w/ PMM QD sling cup - $125

Prices are somewhat flexible, especially if you buy more than one item. This is the first time I've sold anything here but I been trading on r/GunAccessoriesForSale if you want to check my references. Just let me know and I can make a verification post over there.

Pictures: Login to view embedded media

Just happened to catch it as I was scrolling all the way down. Somebody has spoofed longtime member @E. Bryant 's account, complete with his same avatar, but with an extra space after the "E". No postings done by this account yet so cannot report anything, but just bringing it to everybody's attention BEFORE somebody falls for it:

Selling this 223 bolt and barrel I bought from preferred barrel blanks last June. Barrel has about 1k rounds on it and still shoots great but I no longer have an impact action so it's time to sell.

Barrel has some discoloration on the end as pictured that I haven't attempted to remove as it's not super visible. It's 27" 1:7 with a thread protector, chambered in remington match. I was able to run 88 grain ELD-Ms with a BTO of 1.943 in this barrel at about 2800. Those shot great in the wind but this barrel seemed to like 75 grain eld-m best.

Would like to keep together rather than seperate. Selling together at a discount to move it all.

Looking for 500$ shipped

"I'm worried about heavily armed Americans thinking it's their civic duty to violently wipe out tyranny if they don't like the results of an election. But that debate is for another day."

It's another day and it's time for you to (attempt to) defend this twaddle. You're gonna get massacred son.

There will never be a better news broadcast.....ever.
Accurate reporting.
Good documentation.
Classic news commentator voice.
No propaganda whatsoever.

Login to view embedded media

Selling a Vectronix Long Range Thermal Video, also called a JIM LR. It’s been used but all the glass is in good condition. Only issue it has is missing latch for battery box. Comes with carrying case, manual and reference card, cable for external battery, gps cable for PLGR/DAGR, and lense cleaning kit. Feel free to ask any details on the optic. Asking $13,000, possible trade for weapon mounted thermals as well.

Want to sell hardly used v4 setup with shield. I’m asking $500 shipped

Up for sale lightly used:

Spuhr QDP4602–$350

LaRue LT104–$250

Geissele 05-405–$250

Bobro Scar/monolithic mount, 30 mm—$250

Unity fast micro with adm lever—$175

Midwest industries T1-1/3 cowitness mount—$50

All prices shipped Continental USA.

Pending sale

Leupold Mark5 HD
7-35x56 PR2 reticle (MIL) / FFP
w
$2000 1900 cash value Venmo or Money Order
shipped/insured *48 states*

See pics for other info, shooting a gen3 rzr so no need to have this scope
POST here before PM me

Partial trades considered:
Custom g43x w/optic
Kestrel 5700 elite
Garmin Xero C1
Tippman M4-22 (some variations)
Vortex Venom (mil)

Do we have any Direct Burris Opticss Reps on here?

Removed

I wonder if the insurance paid or bowed out on incompetence, negligence, and sheer stupidity?

Login to view embedded media

Want to sell the Manners LRH on my .308. I am selling the barreled action too but I figured it would probably be easier to seperate.

M5 DBM with mini chassis. Remington 700 Short action, inletted for M24 barrels. Excellent condition.

$950 TYD, also located in Denver if you're along the front range somewhere...

A few months back I had ordered (2) New Burris XTR Pro's direct from Burris and after my first outing with them I decided to give both scopes a cleaning, during the cleaning I noticed not just one of the Burris Pro's had debris inside both the Bell and Optical Lens but they both did to an extent it's was visually noticeable while using the Scopes.

Both scopes also suffered from gritty magnification rings that felt like they were rolling over gravel and one had a issue with the parallax not being properly calibrated.

I contacted Burris Customer service and informed them of the issues, they were extremely helpful and sent a prepaid return label, and off they went.

About three weeks later I received a email stating the issues had been fixed and they would soon be on their way. I contacted Burris and to make sure all the issues were addressed, the customer service rep was extremely helpful and even went in back to physically verifie both scopes were repaired and there was no debris inside the scopes. You would imagine my surprise after receiving both scopes back that they still had debris inside on all lenses and only one of the magnification rings was fixed.

So I contacted them again, and just like before the customer service rep was polite and helpful and agreed there most be some issues in the clean rooms and the repair techs missed the magnification ring issue. Again they offered the prepaid shipping label but this time would send out new scopes. Outstanding!! I even told them that I will be using these scope for a Review on Snipershide for a Custom JP LRI-20 and I would make sure to mention their Outstanding customer service and out they went again!

Three days again I received another email that said they were sending out my scopes, and just like last time I called and verified that they were sending out two new scopes. Once I reached Customer Service they again verified that was the case and I thanked them again for the outstanding support.

And that brings us to today about a hour ago I received both scopes back and guess what?, yup! same two scopes only this time obviously nothing was repaired just sent back to me just like they left.

Again I called Customer service, this time I got Shawn on the line told him who I was and that the exact same Scopes that I had just returned came back to me not the new ones.
Sean was immediately defensive and stated that on their side the system says two new scopes were sent out, and all he could do is send another shipping label.... Oh Joy! As I try to explain to him that these are definitely my old scopes he decided to cut me off and hang up.

Ok.. Shawn is having a bad day, so I called back again and Shawn picked up so I asked him why he hung up on me and he said I was arguing with him, well yes I was because I was trying to explain that these are definitely my old scopes because I took photos of the serial # on both before I sent them back last time and you can still see the ring marks, the caps that I marked and the blue painters tape I used to seal them up.





At this point instead of dealing with Shawn's bullshit and piss poor customer service I asked to speak to his supervisor (Yup total Karen move!) But at this point it's my only option, Shawn states he's not available, cool I'll wait! Then Shawn says he's not here now...lol Okay and again I ask to speak to ANY supervisor because this bullshit needs to be resolved, Shawn replies then don't be our Customer and hangs up.

Did Burris merge with Larue?? What in the actual fuck?

Hi guys,
I'm wrapping up an accurized small-frame AR build and trying to finalize a decision on the optic. Looking for something in the MPVO category (~3-18x)

After a lot of reading, I've been considering a Leupold 5HD 3.6-18 or the Burris XTRIII. The summary seems to be FOV and eyebox go to the XTRIII, while Leupold wins in glass quality and size/weight. Any other reasons to pick one over the other in 2023? Illumination would be a bonus, but not a necessity for me.

Other options I've weighed are picking up a used Razor gen iii, a Stiener t6xi 2.5-15, or an Athlon. The Ziess S3 sales caught my attention this week, too, but not sure I want to go as big as a 4-25.

Anything else I should be looking at before hiting the order button?



What is the platform for the scope?
Small-frame AR

What cartridge are you shooting?
.223

What is your intended use for the scope?
Range/PRS/scoped carbine course

What type of conditions will you typically shoot in?
Daylight

What are the typical distances you intend to shoot?
300-600yds.

Are there any specific specifications you would like?
3-18x or reasonably similar size/weight class

Henderson trimmer in immaculate condition well cared for. Comes with the Brass shaving catch, as well as the Sawtooth Rifles Dependabuilt bench mount system Attachment (pictured) only not the base. It comes with a 6mm cutting head 6.5mm cutting head and 30 Cal cutting head. The 30 Cal cutting head is brand new never used. The 6.5 mm cutting head has cut 500 rounds and the 6 mm cutting head has cut 1000 rounds. Asking 760$ shipped
EDIT* the blue brush set up is for neck brushing and not part of the sale but if someone really wants it we can talk.

We just received a shipment of Garmin Xero C1 Pro Chronographs. $599.99 and as always orders over $100 qualify for free shipping (usually UPS).

Come get 'em!!

SnipersHide Members ONLY may use code "10-OFFC1"

Older story... but Peloton (maker of trendy bikes that cost way too much and come with remote trainers because millenials need gold stars every five seconds... But the company is still in free fall and doing worse.


Now here is their 'answer' to turning themselves around. An utter ESG extravaganza of characters who are simply not part of the Peloton Demographic. And set to a song about gang violence.

Login to view embedded media
Let's get real... outside a handful of NFL or NBA players... the demographic for Pelotons is trophy wives in suburban and urban areas who are trying to keep off the fat so that their rich attorney husband does not divorce them for a hot thin young chick. It's not fat milleniels living in trailers by the river. It's not gangbangers. It's not, by any stretch, the fat, ugly people in the pictures. None of those folks fit an image that Peloton buyers relate to... want to look like... or aspire to.

But look how woke it is! It has every oppressed minority in it. It has giant Rachel Dolezal hair. It has everything that your urbanite woke leftist moron could pack into a commercial (including a theme song about gangbanging)... at an expensive luxury product aimed at cute blonde fuzzy-bunny trophy wives living on the upper west side and in Cos Cob.

THIS is why ESG and Get Woke Go Broke are so retarded. This company is doomed. It's finished. Its image is now... shot. It was flying high during Covid... people were buying these things to replace their 'closed' gym membership. They had such momentum. But not only blew the sales curve once Covid ended... but have now rebranded their over-priced 'toys' towards people who don't have a pot to piss in and certainly aren't putting Peloton in their trailer or their Section 8 housing.

Can't wait to see these folks auger in totally. The sad part is that they will take a lot of 401k's with them. Because Woke Investment counselors and hedge fund managers look at this shit and put YOUR money into this crap. And then you lose your money. Because Peloton and its idiot ad agency (and marketing stooges) pissed it away.

Well, it'll be fun to watch it implode. And as Christmas Season approaches... the last thing you want to do is buy this crap! Noone will be around to support it in another year.

Sirhr

I’ve got a bunch of Varget 8lbs I’m looking to thin out. $350 per 8lbs located in AZ

Can bring to a match next season or will be driving AZ-Illinois first week of January if you want to meet.

Just placed my order for one at 10:30 a.m.

Get them while theyre in stock

Quick question for the guys processing their own game. I see no sense in paying close to $200/ whitetail for some guy to make bologna for me.

Wondering if I could get suggestions on a mid level grinder that allows me to also stuff casings. Before you tell me to go be poor somewhere else, I’m not buying a $700 grinder. Looking for a mid tier model that’ll be reliable for 3-4 West Virginia white tails a year.

Thanks!