I remember this like it was yesterday my first day on the job,, and my Moms bday.
The Alfred P. Murrah Federal Building was a United States federal government complex located at 200 N.W. 5th Street in downtown Oklahoma City, Oklahoma. On April 19, 1995, at 9:02 a.m. the building was the target of the Oklahoma City bombing by terrorists Timothy McVeigh and Terry Nichols, which killed 168 people.

Dedicated AR22 upper, CMMG barrel & bolt.
It was more of a loud poof than a kaboom. The rear of the case blew out of the chambered round & the heat ignited the top round in the mag (I think it was heat unless somebody has a better idea). The indent in the mag round looks like it was pressed against the feed ramp of the collar. The bullet in the pic must be from the mag round; I found it on the bench after I pulled the upper off.




The mag looked something like this when I pulled it out. The shredded case was angled forward more & there were about 15 more rounds in it. The front of the left feed lip broke off, there's a small crack at the left rear that extends about 1/2" from the top, & the halves separated at the top rear.


The next round in the mag.


The offending ammo.


The only damage to the gun was a broken extractor spring. Replaced the spring & fired about 35 rds of the same lot number without issue. Two days later the rear of another case blew out (7th round of the day). Broke another extractor spring. I don't think I'll be firing anymore rounds from this lot again. On the day of the first kaboom/poof I fired between 160 to 165 rds without issue. 200 rounds prior to that without issue. So 2 rear of case blowouts out of about 400 of the same lot. Previously I've put about 1,000 rounds of 2 different lots of Super Extra through this rifle without issue.

2 questions
Did heat cause the round in the mag to fire? Anyone else have problems with Aguila?

The Seekins Havak HIT: $2050

https://cstactical.com/seekins-havak-hit/

The HIT is not a hunting action slapped into a new, fancy stock--the HIT is a purpose-built chassis rifle with a load of features included for utility, ease-of-use, and affordability.





The heart of any rifle is the action, and the HIT’s action is silky smooth. With an integrated 20moa rail, recoil lug, extended thread tenon and flat bottom, its superior strength requires no need for bedding into our chassis. Our precise manufacturing abilities allow us to guarantee headspace while offering a solution for the shooter to effortlessly change barrels. Barrel specifications are available open-source to anyone who wants to offer a drop-in barrel. For the shooter, this offers endless options, and the best part: no more waiting for your armorer or gunsmith! Our toolless bolt will let you swap from standard to magnum calibers whenever you want. The chassis is extremely comfortable with toolless adjustability, foldable when you want to put it inside your favorite pack, and built to exceed your expectations. For competition shooters, there will be a pro model available with upgraded components, and exciting competition incentives coming soon.

This is a great starter rifle for those looking to get into precision long range shooting!


Currently in Stock in 6.5cm in FDE

Specs

• Weight: 11.5lbs
  length 43 1/2 inches
  length folded 34 1/2 inches
  Action
  
  Changeable bolt head
  M16 style extractor
  Quick-change barrel system
  Integrated 20MOA Picatinny rail
  Integrated recoil lug
  R700 trigger compatibility
  Extended barrel thread tenon

Chassis

• Dust door
  Toolless length of pull adjustment
  Toolless cheek height adjustment
  Recoil pad fully adjustable
  Carbon fiber cheek piece
  Bag rider
  Adjustable height magazine latch
  Folding stock over bolt
  M-Loc pattern forearm
  Enhanced magwel design for AI pattern mags
  Barricade stop
  AR-style vertical grip
  Optional forward-mounted top rail
  Optional Arca Swiss rail designed specifically for HIT chassis

Barrel

• 416 SS 24”
  M24 Contour
  5R rifling
  5/8-24 muzzle thread with thread protector
  Open-source head space tenon specifications
  Drop-in barrels available

The most amusing thing about every left wing piece of shit on earth is how generous they are with other people's money. If you want to listen to this 80 year-old child molester talk about all the fuckheads we should help, billions for illegal, dopers, convicts and Ukrainian war. Tax breaks for every asshole who reuses to work, but fuck those vets, let's make'em pay taxes on their disability checks. On and on Joe Pedo goes demanding we raise taxes and ratfuck anyone with a savings account to get back at the ethereal "rich people".

But when it comes time for the pedophile to show some love to the vermin he loves, he sure as hell doesn't use his own money. Hell he didn't even tithe to the Catholics he so loves. Joe gave a whopping 3.5% of his income to those in need.



FJB to you too.

When you brag how you plan to steal a presidential election and ruin the booming economy and then do it, extortion, influence peddling and money laundering shouldn't be that big of a shocker.

Biden's response was 'So, what did they think we were going to do?'

Login to view embedded media

2 of each
Cole-tac ammo novel 70$ each
Walsh ammo novel 70$ each
PayPal ff or f2f

AD EDITED

I had 3 Mark 5’s in addition to the Razor, but I pulled them down as I am deciding to keep them for now.

If I decide to sell again I’ll re-edit this same post here.

Vortex Razor Gen II has been sold though.

Thanks!

———

#4 Vortex Razor HD Gen 2 (4.5-27 x 56 / EBR-7C Reticle MIL)

SOLD

Hi guys, hope this is the correct section for this post. Unfortunately I had my u.s roll marked ser # G7008498 Remington 700 receiver stolen 4 weeks ago.
I've filed a police report with my local PD , This receiver was at a gun smiths for usmc A5 build , i had recently decided to stop this build due to funds being tight, im off work due to a knee replacement, the gunsmith sent back my A5 parts in one box, the barrel in one box and my receiver in one box i thought this was very odd but ok, all my parts made it and the barrel made it. The box that supposely held my receiver made it to my post local office open,
maybe the box wasn't sealed correctly, my regular Mail man a great guy said the box didnt have any extra tape on it, if lose packed it could of busted the usps seal there was no wrapping etc just a empty box arrived at the main po. my mail man reported it immediately to his supervisor, they sent it back to sender and notified the po lost and found, so it might show up. if anyone comes across it would appreciate them reporting it to me , from what i learnt i cant report it to atf directly but my local pd with whom i filed the report will , i know its a long shot but you never know.

thanks all for reading this.
Cheers
Will

I have 700 pieces of unopened alpha 6 gt ocd brass. Asking 85 bucks a per 100


All same lot.

Brand new 2023 model from Sweden with 4 modes to include Focus which is near super-human hearing mode. The LED light can be useful but the included gel cups make it so you can wear these all day long.

We sold out of our first batch that came in yesterday in only a few hours, but we are taking limited pre-orders on the ones that will be here by Thursday. Colors are ODG, Camo, and Black.

We will also have a few neckband and Mil-Aux SFA version in but those are not up on the site yet.

$279.95 with free shipping.


Reach out with any questions. I kept a pair for myself and have been really impressed so far.

Thanks for all you business so far!

FL middle school teacher, who is transgender and on hormone therapy to "transition", has been removed from the school after making comments about wanting to shoot students.

But here is where it gets good: the teacher made these statements to the ASSISTANT PRINCIPAL while teaching a class and then REPEATED them to the school guidance counselor. Under a temporary court order, firearms and ammo were removed from the teacher's home. The teacher was allowed to return to school a couple days later.

And it gets better: the comments were made on March 28th and kept quiet until April 10th, when robocalls to parents were made.

G.A. Precision Custom Build
6mm GT (45 rounds fired)
Impact Action
Fluted, Bartlein #8, 1-7.5”, 26”
Trigger Tech Diamond Pro
Area 419 Sidewinder brake (5/8-24)
Manners TCS, Chassis system, KMW adjustable cheek piece
Chassis DBM and MCS Decelerator pad
Elite Scorched Earth
2, 10rd Mag (AICS)
1, 5rd Mag (AICS)
Kahles K24i (SKMR 3 Reticle)
Badger Steel Rings
Harris BRSM 6-9 Notched Leg
$SOLD

Another mass casualty event

I'm 62 and as many of you know, I'm not in the best of health. I doubt I will be able to shoot like I have in the past, so I'm wondering what would you do with the firearms I own. Now don't get me wrong, my shooting ability is not on par with some here, so my equipment isn't as well. But I wonder if selling to a shooter who could use the equipment now isn't the best option. I have kids, but they really do have firearms that are equal to the quality of mine, so they don't have a need for dear old dad's rifles.

What say you?

That's a lot of money. The suit from Smartmatic (the software) is next, and will likely come quickly. Fox will want to get all this over with ASAP.

I remember watching this movie with my stepdad back in the mid 80's. I have been intrigued by sensory deprivation tanks ever since.

Very interesting movie, with the regression he goes through, and always made me wonder just how far fetched the concept was. Someone a lot smarter than me may have an idea, but I certainly don't.

Our VIP Tour Guides will share insider tips and show you the Park like never before.

Found on Facebook.
It's a whole new Disney World.
I wonder what kind of insider tips these tour guides will be sharing?

I saw a member on here had upgraded his BulletSeeker Mach 4 with a RRS BTC-PRO which accepts both Arca & Pic rail. He made an adapter but that part is something others can make or you can reach out to him. But here is my upgrade video

Login to view embedded media
Figured I needed to get back into some content making

We have Defiance actions in stock!

Unless noted, these are all Stainless, but we will send them out for Nitriding at H&M for $125!
***Note: If you bought an action somewhere else, any brand, send it to us, we will Nitride it with our own actions for $125!

Anti and Tenacity actions are now priced without pic rail. We have aluminum 20MOA pic rails, or Talley lightweight ring/mount for $59.
We have bottom metal for the XM and Lapua configurations on hand.
As always, we are happy to place special orders for our customers! (Won't take as long if you order through us)

Here's a list of current on hand actions: Prices include shipping! Additional 2.5% discount available for Cash equivalent payment.

Ruckus Tactical - Medium (Rem Short Action) Std bolt face for .308, Creed, etc... NITRIDED $1653
Anti - Medium (Rem Short Action) Std bolt face for .308, Creed, etc... $1486
Anti - Medium (Rem Short Action) Mag bolt face for Short Mag cartridges $1486
Anti - Left Hand Medium (Rem Short Action) Std bolt face for .308, Creed, etc... $1486
Anti - Left Hand Medium (Rem Short Action) Mag bolt face for Short Mag cartridges $1486
Anti - XM mid length for Short Mag cartridges but allows more mag length $1486
Anti - Left Hand XM mid length for Short Mag cartridges but allows more mag length $1486
Anti - LA Std bolt face for -06, 280 Ackley, 6.5-284, etc... $1486
Anti - LA Mag bolt face for 300WM, 300PRC, 7PRC, etc... $1486
Anti - LA Mag bolt face for 300WM, 300PRC, 7PRC, etc... NITRIDED $1614
Anti - LA Mag bolt face Ultra for RUM, Nosler, etc... $1486
Anti - LA Lapua bolt face for 338 Lapua, 338 Norma, etc... $1486
Anti - Left Hand LA Lapua bolt face for 338 Lapua, 338 Norma, etc... $1486
AntiX - Medium (Rem Short Action) Std bolt face for .308, Creed, etc... $1564
AntiX - XM mid length for Short Mag cartridges but allows more mag length $1564
AntiX - LA Mag bolt face for 300WM, 300PRC, 7PRC, etc... $1564 - In stock, purchase now.
AntiX - LA Mag bolt face Ultra for RUM, Nosler, etc... $1564 - In stock, purchase now.

We offer an additional 2.5% discount for Cash/Check/MO/ACH or other cash equivalent payment methods.

Check our website PuckerFactorRifles.com for updated quantities.
If you are not sure which one you need, give us a call or text at 307-679-1191. We know it can be confusing, and are happy to help!

We are doing everything we can as a dealer to minimize the impact of the new Defiance price increase so our customers can continue to enjoy the unbeatable quality and features of the Defiance product line.

If you buy your action from us, we will install your prefit barrel for free! Even if you didn't buy it from us!
Includes bore scoping the chamber for concentricity (Important!), installing barrel, and verifying headspace. No need to buy, borrow or rent go gauges or a barrel vise! We can even do all of the above and send the barrel back uninstalled if you prefer to install it yourself. All you pay is shipping. Call or text for details, 307-679-1191, or email [email protected]

I have two ATS Barrel tuners that are very lightly used. I have a 5/8 x 24 centerfire tuner and a 1/2 x28 tuner for a 223 or rimfire. The 5/8 x24 I had in for one range session and one match and the 1/2 x28 I had on for 2 matches. I shoot prs and don’t need this level of tuning for what I do . They retail 200 ea on short action precision they are like new with a little powder residue on them .

125 ea shipped conus

Be smarter than this...

Does anyone know if scopes with 10 yards parallax affect image quality? I guess my question is...Do scope manufacturers have limitations or are they any compromises given up when they design scopes in different magnification ranges with a minimum of 10 yard parallax adjustment?

I have 2 black powder coated Bison Tank Trap Knuckles that are new and still in the plastic they were shipped to me in. I intended to add them to my home range but haven't used them so I am passing them on. Hardware included.

These sell for $97.50 each from Bison Tactical and are out of stock. I am asking $90 each shipped via Priority in the CONUS. I accept Venmo and discreet PayPal.

Lots of jobs lost, but they will be welcomed in Texas. If you don’t feel like watching the video Washington’s new assault weapons bill bans manufacturing of parts. No official word yet but unless they make some change Aero which is located in Washington will have to move operations, and if the video is correct it’s hundreds of jobs not counting the other peoples jobs indirectly connected.

Login to view embedded media