Black AX 2012 model with newer post 2014 AX buttstock conversion , Comes with 2 mags , 3 barrels . 2 forends , 1 barrel changing tool , 1 AI scope mount 34mm .
*Ai UK 7.62 factory barrel cut to 16.5" threaded 5/8-24 I have many handloads for it many weight bullets and powder recepies with velocities, if you're a handloader ill pass on the info. No problem hitting 950 yards regularly at my range. 168 thru 190 grain bullets stabilized just fine. Round count upwards of 2500 rounds , these barrels go awhile though .
*Second barrel included. Aina 18.5" 6.5 cm threaded 5/8-24 and i also have several loads for it with 123 bhtp , 130 hybrid and 140 elm bullets. Round count is less than 700.
*Third barrel is a stainless steel Benchmark chambered by ES Tactical 16.5" 6.5cm threaded 5/8-24. 250 rounds fired through it using 123 bhtp. Also no problems reaching 950 plus yards .
*AX comes with 2 forends. The original 13" forend and top rail for the 16.5" barrels and included also is a black 16" forend with top rail for the 18" plus barrels .
RRS arca bottom piece and I'll include the original plastic furniture piece .

*AI tool included to change your own barrels at home , you'll need a barrel vise though.
Ai 34mm scope mount.
This rifle is not the Quick Barrel change model .
**Not looking for trades of any kind .
Rifle has never been kryloned . No issues other than normal wear and tear.
*Riflescope , Suppressor, Bipod , Sling and Backpack or shooting mat pictured not included**No longer including spare bolt body.
Will not sell any parts separately at this time. If anything changes it will be posted here asap.

SOLD EVERYTHING SOLD NO PARTS LEFT NO RIFLE SOLD SOLD $4075 with UPS Ground shipping to your FFL , insurance is on the buyer. Zelle , Discreete PayPal ff ,or check , you must be willing to wait for clear my bank before I ship. U.S.P.S. Money Orders or Cashiers

I have a V3 autotrickler that I will not be needing aroumd the end of around October, it has the Area 419 cup, base with guide, clear lid, and nozzle/straw, works perfectly.

650 shipped, or f2f located in Jacksonville FL.
Scale not included.

Like new, used for one practice session. Just going back to mdt
$285 w/clamp
$235 w/out
Shipped tyd

Just moved here to SLC or at least here for awhile. Want to go shoot my guns sometime out in BLM land but couldn't find out where BLM land is. Is their an app for that? Also any good gun ranges in SLC I should go to?

"Inflation Reduction Act"? Does anyone with more than 2 working brain cells believe this is anything but a pet project spending spree? Spend as much as you can before they face voters in November. But the name is right up there with some other beauties, like 'affirmative action'. They must have total disdain for those who are forced to live with and pay for this nonsense, including their very own voters.

For sale is a Nucleus Gen 1 barreled short action with a PVA Heavy Palma 26" barrel chambered in 7 SAUM. The barrel is cut rifled, threaded 5/8-24, and has exactly 200 rounds on it. Also the action comes with an ARC action wrench, a 0.473" bolt head, and an extra tear drop bolt handle. I'd like to keep everything together, not interested in trades, asking $1500 shipped to your ffl. Posting this for a friend please pm me with any questions.

*SOLD* For sale is a SIG P320 X5 Legion in 9mm. This is the Legion Grip module, which is tungsten infused and has a magwell. This was purchased new a few months ago and only has about 200-300 rds on it.
Comes with the Gray Guns Sear, competition Sear Springs, and Gray Guns Safety Pin installed. The trigger breaks just under 3lbs. Comes with the case and 3 mags as pictured.

*SOLD* $775, and will split actual shipping to FFL if not a local sale.

Looking to sell a good condition Anvil30 (no arc) with series 2 adapter. Has a good nick as shown in pics. Besides that. It’s good to go.

Payment via PayPal F&F or Venmo

***SOLD***

Edited****

Black Rem 700 SA with arca rail. Used in two matches. $325 shipped. I accept Venmo or PayPal F&F.

Please see the photo.

I recently got these two AR-15 parts kits (everything included except the lower receivers). Both are the same length barrel, but the position of the gas block is different.

How do you call these? (ie what are the proper terms for these different length gas systems?). Barrels measure (from chamber to end of flash hider) 17.25" The top one is marked 5.56x45 1:9, and is "unknown manufacturer". The bottom one is not marked for chamber size anywhere, and is an Anderson manufacture. Both were clean, and new or like new condition. The Anderson upper appeared brand spanking new with absolutely no wear marks on it. I lubed each bolt/bolt carrier quite a bit. The top buffer weighs 5.06 oz, the bottom one weighs 2.94 oz.

I put each upper, with its own bolt/bolt carrier & buffer/buffer spring on the full stock lower at the bottom (from one of my other guns) to test fire & zero.

The top one choked; failed to feed, failed to extract, had to be mortared to unlock the bolt, about every 3rd round... I had to rod the bore to extract spent casings, and they had damaged rims.

The second one in the photo went on the exact same full length lower, and performed well, quickly zero-ing. I was using my own handloads, which function well in my other, full-size 20" guns.

-why does the top upper receiver/barrel combo choke? FTF/FTE, bolt gets stuck? I didn't try other ammo, or store-bought ammo yet. I have some steel case I could try, or I could buy some mfg. ammo.

I intend to get two identical lowers and assemble these parts kits to complete rifles. Not a problem there. All the other little parts/springs/etc were in the box.

-can I put the adjustable stock/buffer combo on the top one?

I’ve got a 6.5 Creedmoor barrel with about 1,200 rounds through it. Within the last 200 rounds, I’ve noticed what looks like peening on the edge of the lands in the first few inches of the barrel. I’ve also noticed what appears to be small circular pores or pits that have also recently developed. Any idea what could be causing this? It shoots well, but want to identify the cause regardless.

Died at 83... Best known as the Island Hoppers chopper Pilot in Magnum PI. One of my favorite shows growing up.


RIP sir! He not only 'got out' of Watts as a young man, but was part of a very entertaining show. Moreover he did a lot to promote Vietnam Veterans as 'great folks' at a time when many were rejecting them from society. Magnum P.I. and Simon and Simon were among the first shows to feature Vietnam Veterans as the heroes...

Sihr

A few things already seem off with this .
- Can't see who their team is on there sight without registering . WTF.

- They support Ranked Choice Voting .
How this works . People rank their choices from number one to number three . IE say Tom , Dick and Harry . If Harry gets the least votes and Tom and Dick individually do not have the required 50 percent .
They go back to the Losers ballots and see who there second choice is . They then give the voters ( who picked the clear loser ) number two choice their votes in hope of putting the number 2 at fifty percent . Number two should never be at fifty percent as Washington is already full to the Gunwhales with shit .
Seriously . If you vote for a Fuckin Idiot why would they give you another choice ?

Edit : The Founder is a Socialist in my opine . Championed a basic income platform .

The Senate used the Reconcilliation process to pass Bidens "Inflation Act" along party lines. $390 Billion of the funds are "unassigned"....yeah, nothing to see here. Oh and get ready for the 86,000 new IRS agents and the BILLIONS going toward climate change.

Since we may we'll be getting kinetic with the PRC, time to discuss their internal workings and goals.

China is not homogeneous. There are the Han, other Chinese and everyone else. This may be of some utility in dealing with them.

Two of the best sources to get a feel for what really goes on within China are these two gentlemen. They are no longer in China, and can report what they experienced first-hand. Much better than programmatic crap from official sources.

Login to view embedded media


This guy (serpentza) and Laowhy86 (a play on Laowai, or foreigner,) lived in and toured China on motorcycle for about 10 years. They know the culture inside and out.

Login to view embedded media

Peruse their videos, pick one of interest, grab a beverage and enjoy.

Anyone with additional experience, please weigh in.

So I’m minding my own business in a far corner of the patio at my coffee shop this morning when a guy walks out with a couple of what looked to be 3 year old girls. The girls immediately start climbing all over everything but I don’t care because not my monkeys, not my circus.
Things began to change when one of the girls tries to climb over my legs because she can’t squeeze between me and the coffee table or realize that she can just walk around the other side, simultaneously the other girl starts climbing on the patio couch I’m sitting on. I look at the dad and he is apparently perfectly fine with his girls climbing on a complete stranger because he is just sitting there doing nothing.
I’m about to say something to the dad when one of the girls tells me that they are on their way to the amusement park (hopefully to give their mother an hour or two of sleep) and the girl pulls up her shirt to show me her swimsuit (thankfully she was in fact wearing one under her shirt). I noticed that this whole new extra large bucket of awkwardness doesn’t bother her dad in the least because that millennial dad has achieved a millennial level of self absorption.
In my best uncle Dan voice I tell the girls that any clothes they have can be swimsuits if they want to be and just as I’m about to buy the two unguided furniture missiles a double shot espresso each the fact that I just told the miniature monsters that they can go swimming in any clothes manages to penetrate the dads self absorption shield that protects him from reality and he quickly rounded up the curly haired monkeys and found a different corner of the patio to make their personal jungle gym.
As I was leaving he shot me a dirty look and I gave him my signature grin and a Queen Elizabeth wave.

Follow me for more expert tips on parenting other peoples kids.

Hell of a deal if you need CTR mags. Was able to add 4 .308 and 3 .223 mags, $350 shipped with tax.

I'd be up for some .223 mags if someone wants to go in halves.

I have a brand new Impact action I’d like to trade for a mid tier optic.

737 RH
308 Bolt Face
AICS Cut

Brand new.

Looking for - mid tier optic.
Steiner T5Xi
Razor Gen II
Leupold MK 5
Minox
Will consider others and can add cash for the right deal.

MIL Only

I have a friend who is an experienced handloader, retired local swat sniper, load up some 6mm arc for my bolt gun.

We are using once fired Hornady brass (not annealed), CCI 450, Hornady 105 gr Match and Leverevolution. Loaded to factory length using Wilson full length sizing die.

The attached 10 round group is 29.2 grain charge weight. Hole 9 & 10 the bolt was heavier than normal when opening and closing. 6 & 7 I’m confident were my fault. If I remove these four shots it’s about a 1/3 moa group. At the start of the session I shoot 1/2” groups with Hornady Black 105 so I’m confident in my fundamentals, ability to call the shot and gear.

Below are the velocities. ES 68 and SD 16. Both are obviously too high.

2900
2909
2861
2889
2881
2887
2881
2881
2929 (heavy bolt)
2908 (heavy bolt)

Is the heavy bolt due to improperly sized brass?

For my purposes a group 1/2” or less is fine.

Any recommendations on how to move forward?

Friend wants to try 29.0 and 29.4.

WTF? The library has it's own police in DC? And what was this idiots reason for pulling out his gun?


How about.... This is not what you are supposed to do!!