Search results

I've got a Gerber similar to this one that has worked very well on 3 elk and 2 deer. I have not needed to sharpen the gut hook and the blade is easy to sharpen and takes an edge well.

Here is a google image I found showing how to secure a load in the Badlands Clutch pack. Here is another image of the 2200. Hopefully that helps.

My Clutch has what they call a "beaver tail" pack on the outside. This outter pack is removable (making it more like a 2200) and is lashed to the main pack by 7 straps (2 on the botton, 2 on the top, and 3 across the middle). You can put your meat in between the main pack and the outter pack...

I have the Badlands Clutch pack. It's just slightly bigger than most day packs but can pack out over 100 lbs of meat in one go. It is very sturdy and very comfortable. My cousin has used the Eberlestock X2 pack for years and that has been a great pack for him. It has hauled thousands of...

Man you guys have had some rotten luck. I hope nobody ever has to go through that with any game, especially big game. The only kills I have ever had claimed by other hunters were doves. They definitely aren't worth fighting over and its usually younger hunters so I don't really mind. I did...

Congrats on a great hunt. I just got my first elk (cow) in Utah. It was blast so I can relate to what you are feeling. Good job and best of luck in your future hunts.

Hey guys, I thought I would share my very first elk taken in the 2014 general season antlerless in Utah. I have a cousin who lives and hunts there that I met for the first time last November. Needless to say we hit it off and I made it out there from California to do something I have...

The 168 gr. Barnes T-TSX is incredibly accurate out of my .308 and devastating on deer and pigs. My load is as follows: Lapua Brass 168 T-TSX 44.1 gr. Varget (IMR 4064 was very accurate as well) CCI BR-2 primer COAL: 2.810 (Barnes like a good jump) 2700 FPS Federal brass is...

This is a 168gr Barnes T-TSX fired from my .308 recovered from a 300 lb. boar. The muzzle velocity was 2,700 FPS and impact velocity would have been around 2,450 +/- FPS. The expanded diameter is .608 (almost double) and the retained weight is 167.0 gr. This is an extremely accurate load in...

No, that doesn't sound right. You should easily get over 3,000 FPS without compressed loads. I know the loading manuals will list some of the higher charges as compressed, but remember, those things are written and edited by the lawyers. Plus, the .270 has been around since 1925 so there are...

3,000 FPS should not be an issue out of a 24" barrel with any of the popular powders for the .270 Win and a 130 gr. bullet. I am running 60.0 gr. of H4831sc and a 130 gr. Barnes T-TSX in Winchester brass with CCI BR-2 primers and am getting right at 3,000 FPS out of a 22" barrel. With a 24"...

I have just finished developing a hunting load for my Tikka T3 Lite in 270 Win that shoots really well, about .5 MOA. Winchester Brass Barnes 130 gr. T-TSX 60.0 gr. of H4831SC CCI BR-2 Primer COAL of 3.330 I also have a match load that will shoot .25 MOA at 100. Winchester Brass...

That's not too bad. I tried BL-C(2) for my Savage .308 when I first started reloading but I could never get consistent groups with it. One group would be 1/2 MOA and then the next would be 1.5 MOA. It was all over the place for me. I got much more consistent groups with Varget, IMR 4064, and...

I have tried using the body die first and then the neck sizer. There really wasn't too much difference, but using the neck sizer first followed by the body die yielded just the slightest amount of better runout more often. German Salazar had similar results in his testing and there is a write...

With your 16.5" barrel, it will be tough to get enough velocity to keep anything stable out to 1,000 yards. I would look into the 155 gr. Lapua Scenar. Plug in some numbers on the JBM calculator using your atmospheric conditions with your 180 Interbond load, the 175 SMK, and the 155 Scenar. I...

If you don't want to pay, you'll have to go out to the desert. There are lots of places out near Lake Elsinore and the Inland Empire. You will have to weigh the time and cost of gas vs. paying to shoot at a range. Pala Indian reservation has a fairly decent shooting range that has steel out...

They are both great powders for the 308. The Reloader 15 won't be as temp stable as the Varget, but probably not enough to make a sizeable difference. The Reloader 15 will not burn nearly as clean as the Varget, at least that was my experience. The Reloader 15 was really dirty, however, I got...

I have a vibratory tumbler and an ultra sonic cleaner. I have never messed with SS so I can't speak to that. I throw my nasty brass in the tumbler with some brass polish in the morning before work. When I get home (about 10-12 hours later) I knock out any media in the primer pockets and then...

Lee Collet Neck Sizing Die Redding Body Die Redding or Forster Micrometer Seater This is all you will need. Use them in that order. I have this exact setup for my 308 and a 270. I have never had a round come out with more than .002" runout and 90%+ are .001" or less runout.

I used the defaults just for the example but at my altitude and typical atmospheric conditions I get about the same results. In fact, changing the atmospherics and elevation up to 10,000 ft., my 155 Scenar load is always better than my 175 SMK load. In drop the Scenar is always 16%-18%...