gap

Brand New Bartlein Barrel 26" M24 Contour 7.5t 6xc Chambered By GA Precision. 5/8x24 Muzzle 300 pieces of virgin 6xc Peterson SRP. For Impact Action $850 shipped.

I got a DPMS 308 24" with the Carbon Fiber Free Float Tube.... I bought a slighthly use steiner scope 5-25x56 with 34mm TPS rings, either low 1.025" or medium 1.185":confused: My question is if the gap in between the bottom of the scope and top of the tube it is ok? or a need more...

Proof Research sent over a 308 barrel, actually they sent it GA Precision and George had the guys spin it up for my AI Rifle. Stop by Mile High Today and Adam spun it on my AX. We had to be a bit careful and actually went under the recommended torque settings so, right now it's a bit of an...

Purchased a set of new LT709 30mm rings from a fellow member. Turns out when I install my 10x SS 30mm, there is almost a dime sized gap between the upper and lower rings, on both sides. I have searched and many said its "ok" but is this to be expected from a company like LaRue on rings this...

Gentlemen, I finally was able to save up some money and order a GAP rifle. It is a 300 WM on an ACIS 2.0 stock. To get the most of my purchase I have been looking through some courses to take over the summer. I am military which opens a few more options so you can keep that in mind. The main...

Question - When is it ok for a wife to hijack her husband's build? A bit of background. I have been shooting since I was 7. Nothing makes stress melt away like focusing on a target. Unfortunately I have a spinal injury that limits the amount of recoil my body can absorb. Thus I tend to...

Looking forward to trying this bad boy out... GAP Built, Bravo 6 Delta: Bartlein Gain Twist Barrel Defiance Deviant Action Manner Carbon Fiber Composite Stock Accuracy International AW Mags I will post more pictures as they are on my phone

I can't hold a .50 cal up, so I have to use a little gun at closer ranges... <iframe width="640" height="360" src="http://www.youtube.com/embed/tGE-wmVDI0A" frameborder="0" allowfullscreen></iframe>

I shortened the first post, and copied in my results from yesterday evening (same is posted below). I still need some assistance on this. All help is appreciated. I bought a GAP .338 Lapua Mag from a member on snipershide. After receiving it, and before shooting it, I discovered that the...

I have a GAP .308 which will not take any old ammo, so I am looking for some good quality ammo, properly sized, at a non-gouger price. Sadly I cannot reload at this time. I am ordering from SouthWest both new and reloads but wanted to try some other makes as I decide what this rifle likes...

I am about ready to load for my 260. I have 139 grain lapua scenar bullets and h4350 powder with cci br2 primers. The gun is a gap ar-10 with a 1-8.5 twist 22" bartlein barrel. What would be a good starting load? Thank you in advance.

Well, I decided that I would share some of my findings regarding my GAP M2008 Lapua Mag. First off, specs and a picture. Specs: M2008 Lapua Action w/20 MOA base 28" Bartlein 1-9.7" twist barrel, MTU contour Badger FTE Badger Rings NF 5.5-22x50 w/NP-R1 Remington 40X trigger AICS 2.0 LA w/AIAW...

Does anyone have a good load for a 260 gap ar10.

Just picked it up this afternoon - been playing with it ever since!!

Hey Guys need a favor, I see all sorts of great pictures on here of our rifles in the field, at comps, hunting pictures Etc, if you guys have time post them up on our website Below is the link. Come-on Frank I know you have a ton...

Just got home from work and found a message from Tracey on my voicemail. My first GAP rifle is complete and ready to ship!! I cannot wait to get my hands on this bad boy - I've been dancing around like a kid at X-MAS!! I will post pics of my new riflle when it arrives.

Any help would be greatly appreciated as I have checked all the usual on-line vendors. I should be getting my new 7mm Rem Mag from GA Precision any day, and all I have been able to find locally is a few lbs of Reloder 22. Any suggestions on where I can find more or a good quantity of Retumbo? I...

Thinking of having them build me a rifle. Probably a crusader with a manners stock. I would like any constructive suggestions any of you may have as to additions or alterations. Anything you've experienced that would influence any future decisions for a rifle build. I will have to sell a few...

Has anyone ever had George and the fellas at GAP build on a G30 McMillan action? Hardly see any rifles with these actions.

Here is my GA Precision 7 WSM. It has a Surgeon 591 action with KMW bolt knob, Remington 40X trigger, Bartlein 5R barrel in #7 contour with 1:9" twist and a Badger Thruster muzzle brake for a total length of around 26", Atlas bipod on a spigot going into an AICS 2.0 SA FDE. Barrel and action...