grain

Unopened box 500 count of 115 Dtacs, RBT closed nose, Coated and an opened box of 490 for $310

I have got the components, I have done a significant about of reading and now I need some handholding and definitive advice (I know a true oxymoron). When you are loading .308 ammo how many try to duplicate Gold Medal Match, M118LR, etc. That is to say 2.800 on the nut for length and 45 (plus...

Has anybody tried the new 6MM Nosler CC bullet? http://www.midwayusa.com/viewproduct/?productnumber=495190 How does it shoot? Does it stabilize in a 1x9? They are advertising it as having a BC of .593. That has to be BS. What BC did it actually exhibit for you...

Can anyone tell me if you can load the 75g swift serocco to fit a AR mag? I have tried the 75g A-MAX and it was just about the tip to long. I have a White Oak 20 inch barrel on a AR15 1-7 twist.

I got a small pile of 7mmRM brass, I sorted it by weight since it came from different boxes. The difference between the light and heavy is 10 grains. Is this going to make enough difference to cause pressure problems between the extremes? The gun it is for is a hunting rifle only. I can only...

So I ended up with two boxes of these (200) and am not sure how to go about loading them for my 308. I have a Remington 5R. Any or you guys ever loaded 190's for a 308 befor? I have a keg of IMR 4064 and am hoping you guys have a load that will work with these. Pics would be good. Thanks

I just picked up some speer 30 cal 125 GR hollow point "TNT" rounds for my .308 for some coyote and squirell hunting... I have some IMR 4895 right now,federal cases and federal primers any suggested powder weight for this round I couldn't find anything in my books... Thanks!!!

I just put 20 155 grain Lapua Scenar on my scales (one electronic/one manual) and found that they ranged in weight from 154.1 grains-154.5 grains. NOT ONE WAS 155 GRAINS FROM 5 DIFFERENT BOXES! Is this normal for Lapua? (my SMK almost always come out at the exact weight specified... the...

anyone know if one could reload the JLK 80 grain VLD and make it chamber in the noveske match mod 0 chamber ar-15 biuld with noveske 7 twist 18" SPR barrel dont have a chamber length gauge at the moment, kinda of a long shot, but wondering if anyone knew off hand

I have 400 80 grain matchking bullets and put 23 grains of varget, how deep can i seat them without major pressure and get them to shoot out of a ar? what if i went to a depth of 2.260, unsafe?

Hello everyone: I just purchased 3 boxes of the Fiocchi 180 grain SMK load for my 16 inch 1 in 10 twist LAR-8. Unfotunately I can't get to the range for a while Does anyone have experience with this load? How accurate is this load out to 100 and 200 yards? I hear that a 1 in 10 twist tends...

Just a feller. Has anyone used the new 95 grain SMK's in their .243. If so, what loads have you tried, and what kinda accuracy and velocity are you getting. Would you recommend them for ranges out to 800 yards ? Mike

I have a box of the 26 grain HP's by Barnes. Hodgdon lists data for 32, 35, 40 and 50 grain bullets, but not the 26's. I back calculated a load range for BLC-2 and H335 for a linear regression to 26 grains, added a little to the min, and worked up to a little past the max (1 grain) for what I...

Preferably Varget. Any help would be appreciated as I do not have a Hornady reloading manual. These will be fireforming loads for a 223 AI, 1 in 7.5 twist, 22 inch barrel. Thanks Eddie

Does anybody have any loads for 95vlds for 6mm remington. I have a 40x in 6mm and havn't found any loads to start with.

I have a 9.5 twist krieger barrel on a surgeon xl action. I found a load that will shoot the 300 grainers pretty well it's imr 4350 but the velocity is only 2650 fps. I was wondering if any one else has any loads that are faster than this that will shoot 1/2 moa or better. Trying to find a load...

I got 5 boxes about 2 months ago and now it seems like it no longer exists! Everywhere is sold out--all they have is 150's and 168's... even the 3006 180 grain ammunition is nowhere to be found... Where did it all go? Does anyone use the heavier ammo for their .308/3006 here? If so, where do you...

Prior to hand loading .223 I purchased some Match 69 Grain from Georgia Arms Reloaders. This bullet appears to shoot extremely well in all of my AR 223 from the 16 to 20" and the 1:8 and 1:9 twist. I can not identify who makes a 69 grain JHP with a cannalur? They use 748 powder and what...

Years ago my friend had the Idea for a long range rig and decided he needed something with a really high BC. He was in the 50 game and thought those wimpy 750 grainers were not enough.So he had some custom bullets made and had a barrel with a fast twist made.He made the bullet a single shot so...

Hope I'm not late in putting this out there but early BC was stated as being .810. Lapua website states BC at 2700 fps and less is .760 based on Doppler Radar. Pretty significant difference. Unless I'm missing something or just a little ignorant on the physics is the .760 BC the one to use for...