trigger

  1. alien319

    Gunsmithing New McM A4 with SPS-V, trigger housing problem?

    Hey guys, I just received my new McM A4 stock and my new SPS Varmint in .308 win. I am having trouble with the trigger housing fitting into the stock. Is this due to the new X-Mark Pro Trigger? Do I need to file or sand down the trigger housing channel to get it to fit? Please help with this...
    • alien319
    • Thread
    • housing mcm problem spsv trigger
    • Replies: 5
    • Forum: The Armory
  2. B

    TRG Trigger

    Hello all I'm new to this forum and was wondering if anyone could impart any knowledge about the do's and dont's of adjusting the trigger on the TRG. Any input would be greatly appreciated. Thankyou
  3. S

    Rifle Scopes Well I want to pull the trigger on a Nightforce

    OK, as the title suggests I'm buying a Nightforce. Who's a site supporter, a pleasure to deal with, and has good prices? I'm wanting a 5-22x50 with a zero stop thanks, SR
  4. M

    AR15 Geissele Trigger vs. CLE

    Hi Guys: I tried the search engine, but could not find an answer. I am currently deciding between a Geissele match trigger or the match trigger offered by Compass Lake. Does anyone have experience with both of these triggers? Which one is better? I will be shooting alot of benchrest, but...
  5. ltfirehunter

    Rem 541T trigger upgrade

    I have a Rem 541T and would like to replace the trigger with a better lighter one that will adjust down in the ounces. Any Ideas?
  6. Kasumi

    trigger work on/541X

    I've been shooting a new Remington 541X, the trigger pull must be around 7-8 lbs. There is no adjustment, I've read that stoning the trigger yields very little results. Anyone have a solution to get the trigger pull closer to 2-3 lbs. I think Remington will install a new adjustable trigger...
  7. J

    Remington X-Mark Trigger Question

    I just picked up a new 5R with the X-Mark trigger on it. I've got a AICS stock on the way for the rifle, but after some reading, I'm not sure if the x-mark safety will fit in the AICS. Am I going to need to replace the trigger or safety to fit the AICS? If so, will any aftermarket 700 trigger...
  8. K

    Gunsmithing Factory M700 Trigger Wobble

    I took delivery of a Shilen "standard" trigger today and am somewhat disappointed it's shape. It's narrow and non-serrated which is a stark contrast to the factory Remington trigger, which is wider and serrated, that I was replacing. I recently received my rifle from GAP - an M700 w/factory...
    • khawk
    • Thread
    • factory m700 trigger wobble
    • Replies: 0
    • Forum: The Armory
  9. insectguy

    New TRG 22 Trigger

    Woo-hoo! I just got my new TRG 22 trigger-- light, 2 stage, and awesome. Now I'm ready for another go-around at a RO precision course..... And to think it only cost me a mere $323. Anyone wanna buy a slightly used, single stage heavy TRG 22 trigger????
  10. Smokin

    Huber Tactical vs CG Jackson Trigger

    Just read the writeup on Huber Tactical 2 stage triggers. It seems that the main competition for that trigger is the CG Jackson trigger. The Huber is a bit more expensive but doenst require gunsmithing. The CG Jackson will require inletting and adjusting. Anyone with some real world experience...
  11. M

    Gunsmithing Broke an X-Mark Pro trigger, need advice

    The finger lever broke off at the adjustment screw, must have inadvertantly bumped it while it was out of the stock. anyway, I'm looking for a LH replacement trigger. I noticed on Rifle Basix website that only their "K" type triggers will fit a rifle originally fitted with the x-mark pro, and...
  12. D

    Who has a AR10 2 stage Jard trigger in there AR10?

    Anyone used a 2 stage AR10 Jard trigger? What weight did you select and what you think about it? How many rds have you shot with it? I was looking on there website at there 3# and 4# triggers.
  13. trigger time

    Who makes a good trigger for AR-10 DPMS

    Before I get slammed, yes I searched and no I didn't find anything. Looking for a good single stage trigger for an DPMS AR-10. Thanks in advance, Tony
  14. P

    Mix Single and Two Stage Trigger - One Shooter?

    I am building a couple of AR15s and one AR10, as well as obtaining a couple of bolt rifles (over time). Question is, should these rifles all have the same type of trigger (single stage or two stage)? I have been told by some that trying to switch back and forth between both types can be...
  15. ker2222

    Gunsmithing trigger install???? need some help

    anyone have a link or pdf or something with step by step install directions for a rem 700 trigger??? I have: barreled action with new x-mark trigger old style trigger with bolt lock up safety even I don't have: know how to swap them out
  16. N

    CG Jackson Trigger On A Quad

    I just picked up a Quad off of GB and will be doing the standard ditch the stock, barrel, and knob and build er up. I was wondering if anyone has sprung for a CG Jackson trigger for their quad and what they think of them? I think I remember reading they can be set down to 10oz for the final...
  17. NYresq

    Gunsmithing remington trigger safety

    Hey guys and gals, I just got a surgeon action built up and I have a timney trigger new in the package, but it didnt come with the safety lever or the pins to put it on. I have used these triggers before and it requires taking the pins and levers off a donor remington trigger group.. my question...
    • NYresq
    • Thread
    • remington safety trigger
    • Replies: 6
    • Forum: The Armory
  18. S

    Gunsmithing AIW trigger

    Any idea to how bring it down to maybe 1.5lb?
  19. chris223

    Gunsmithing trigger 4 bushmaster bullpup

    heres a stupid question my father in law owns a bushmaster bullpup in 223 and it has got what has to be the worst trigger in the world does anyone know of a replacement option on said rifle ive already ckd brownells and bushmaster they have no such animal/any ideas would be great. besides the...
  20. sniper7369

    Gunsmithing Canjar trigger on new 700 SPS?

    OK, so today when I ordered my HS precision stock for my 700 I picked up this old Canjar trigger. I REALLY do not like the X-mark trigger that came with rifle. Anyway, my stock will be here Tuesday and I was going to see if this trigger would work in my rifle. I just don't have any idea if...
Top Bottom
Back
Home
Forums
Merch
Alerts