• Thanks to everyone who joined The Shot You’ll Never Forget Giveaway!

    We'll be announcing the winner early next week, keep an eye out!

    See the contest

trigger

  1. rc2125

    Gunsmithing Jewell trigger, remove the rem style bolt release?

    Have a jewell trigger with the rem style bolt release. Got a new action with a side bolt release. I know what happens when taking rem triggers apart, but would hate for this jewell to go "boing" when taking out the two large pivot pins, to remove the bolt release deal. Anyone ever successfully...
    • rc2125
    • Thread
    • bolt jewell release rem remove style trigger
    • Replies: 3
    • Forum: The Armory
  2. H

    Gunsmithing AR Trigger Groups?

    I have been wondering about AR trigger groups. Will the AR-15 trigger groups, like the 2 stage type, fit in the 308 lowers like the DPMS LR-308 lowers? I have been thinking about putting a 2 stage trigger in the Lower I built and figured I had better find out if they will fit before I try it.
  3. padronanniversary

    AIAW trigger

    I did a few searches and really have not found to much feedback regarding the AIAW trigger. Can someone enlighten me on it ? I understand from the website it is adjustable. How does it feel ? Also what is the adjustment range ?
  4. eddy

    Gunsmithing hs precision dbm and trigger issue

    i had posted a recent topic about the trigger guard not fitting the new stock. well that issue is taken care of, and now i have another one. i have the hs precision dbm and after i got it to fit into the stock, i installed the action and the trigger well is too narrow, and the bolt release gets...
    • eddy
    • Thread
    • dbm issue precision trigger
    • Replies: 10
    • Forum: The Armory
  5. D

    Trigger fit?

    Does anyone know if any Rem. 700 trigger will fit any Rem. 700? In other word's, will a long action trigger fit a short action gun / and / or an SPS Tactical? I need a stock trigger for a project and I found one, however it is a LA trigger and my rec. is a SA SPS. Will there be a problem?
  6. V

    Trigger Pull Weight, TRG22

    Sorry for another question regarding the TRG 22. Does anyone know the recommended pull weight for the first stage of the trigger. I tested the weight of the second stage and is at 3 lbs. The manual advises how to adjust but does not mention anything regarding recommended weight of 1st stage in...
  7. LoneWolfUSMC

    Rifle Basix Savage MkII trigger?

    Anyone have one of these? As much as I try to like it, I really do not like the accutrigger on my BTVS. The pull weight is fine, but the little lever and my finger don't agree.
  8. G

    Opinion of Timney 700 trigger

    Is the Timney trigger for remington 700 rifles a good choice for a precision rifle? Im looking for a crisp 2.5lb pull.
  9. Known

    Gunsmithing Feeding problem with Badger M5 trigger guard

    Hi, I'm having an occasional feeding problem with the Badger M5 setup. I installed it using the pillars supplied with the kit. The rifle is a .308 chambered with a Palma reamer. Receiver is a factory Remington 700 Left Handed short action. Brass is brand new Lapua. Bullets are 155 scenars...
    • Known
    • Thread
    • badger feeding guard problem trigger
    • Replies: 2
    • Forum: The Armory
  10. ms6852

    Gunsmithing Trigger adjustment

    I posted this question and got no hits, probably because I posted it in the wrong section. Anyway I would like a lighter trigger pull on a 10/22 trigger. I am not a gunsmith just a tinkerer. I took the trigger apart and polished it, which took me several hours to put it back together. I...
  11. P

    Gunsmithing Remington replacement trigger?

    I tried a search and got a LOT of results. I know this has to have been asked before, but,... I have a Remington 700 SPS-V. Since it is an SPS it has the X-Mark trigger from what I understand, and it can't be adjusted very well. Which aftermarket trigger makes a good replacement? I am...
  12. P

    Gunsmithing Remington trigger?

    I think I know this but wanted to check. I bought a Remington 700 SPS. I really need to adjust the trigger. These do have the X-Mark trigger- correct? I want to make sure I look at the correct set of instructions. Thanks, Jim
  13. ms6852

    Lighter trigger?

    If I wanted to lightened the trigger pull on a factory 10/22 ruger, can it be done by just clipping one or two coils from the hammer or does it have to be done to the sear spring? I have polished most internal parts but I am still at around 4.5 lbs. Help would be greatly appreciated. I do not...
  14. Alaskaman11

    New AR Trigger

    Ok, I'm going to replace the crappy trigger in my Bushmaster, I want one about 3 lbs, any ideas people?
  15. O

    Replacing trigger on 700 - Shilen vs Rifle Basix

    Looking to replace the trigger on my 700p. A friend recommended either Shilen or Rifle Basix. Does anyone have any thoughts/feedback on which to choose? Thanks.
  16. Smokin

    Who sells Anschutz Trigger Shoes?

    I can only find suppliers in the UK. Anyone know where I can source trigger shoes in the US?
  17. M

    Gunsmithing Value of a 40X old school trigger assembly

    I have an old school 40X trigger that I got for the tall safety to put on a M40 clone. Found the correct safety catch elsewhere so I have the complete trigger assembly left over. Figured that I would use it someday but haven't in several years so thought that I would put it up for sale. That...
    • MtGoat
    • Thread
    • 40x assembly school trigger
    • Replies: 5
    • Forum: The Armory
  18. alien319

    Gunsmithing New McM A4 with SPS-V, trigger housing problem?

    Hey guys, I just received my new McM A4 stock and my new SPS Varmint in .308 win. I am having trouble with the trigger housing fitting into the stock. Is this due to the new X-Mark Pro Trigger? Do I need to file or sand down the trigger housing channel to get it to fit? Please help with this...
    • alien319
    • Thread
    • housing mcm problem spsv trigger
    • Replies: 5
    • Forum: The Armory
  19. B

    TRG Trigger

    Hello all I'm new to this forum and was wondering if anyone could impart any knowledge about the do's and dont's of adjusting the trigger on the TRG. Any input would be greatly appreciated. Thankyou
  20. S

    Rifle Scopes Well I want to pull the trigger on a Nightforce

    OK, as the title suggests I'm buying a Nightforce. Who's a site supporter, a pleasure to deal with, and has good prices? I'm wanting a 5-22x50 with a zero stop thanks, SR
Top Bottom
Back
Home
Forums
Merch
Alerts