This is for the chassis only. Not the rifle sitting inside it in the pictures.

A gray KRG Whiskey 3 folder. it has a light coat of OD on the plastic only. All the metal is still untouched.

All the original pieces and the box are included.

You can take it stock or with the following extras that are currently installed:

Aluminum trigger guard with adjustable height mag catch

Angled bag rider

Minimalist spigot with polymer rail

Barricade stop

Overmolded cheekpiece

Stock: $1,000
With everything: $1,175

Through a series of too many trades I ended up with carbines I’ll never use so they just sit in the safe now. Looking to sell them all off.

1) LWRC DI 5.56 16” in OD green. Factory fluted barrel, etc. In great condition, low round count. - SOLD

2) LMT with a bunch of change outs. It’s a LMT upper and lower, but BCG and barrel were swapped out to a headspaced BA. Trigger changed out to Larue MBT. Armaspec buffer system. - $1150 shipped

3) PWS MK116 Mod 2 in bronze cerakote. Also in great condition with low round count. - SPF

4) Yugo M70AB2 AK. - SOLD

5) IWI Tavor with tons of upgrades. Geissele longbow, new grip system (replaces the one with the finger guard), and some others. I would have to see everything done to it. - $1750 shipped

6) PSA Sabre 14.7 PW to legal length. Has the BAD lever and ambi charging handle. FDE - SOLD

No trades. Optics, sights, and accessories not included.

More and better photos will be posted later.

NCIC currently offline due to power outage. If you are one requiring background for purchase, there may be a delay...

Bought this from another member on the hide a few years back and just haven’t had the time to compete in PRS much. Will trade towards high end IR lasers/night vision stuff.

Lone Peak Fuzion action
Criterion Match barrel, 1-7 twist, with barrel nut, MTU profile, around 1k rounds on the barrel.
2 brand new barrels, Hawk Hill blanks spun up by TS Customs. Both barrels are MTU profile, brand new, unfired.
26” 6mm creedmoor barrel 7.3t,
22” 6.5mm Creedmoor barrel 8t.
MPA BA comp chassis OD green
Front and rear weight kits
Enhanced Vertical Grip
Adjustable mag latch
V3 spigot mount with Arca and Picatinny
TT Diamond trigger
Harris bipod with Area 419 Arca adaptor
Folding buttstock
Machined buttstock to accept thumb screws so it adjustments are tool less.
MPA muzzle brake
Two round side holder
Bunch of AICS mags as well as some AW mags.

$3200

Could be willing to part out the barrels

Also have a boatload of 6mm creed that I’ll cut a deal on for the buyer. Everything from FGMM to Prime to Hornady




Ammo available:
220 rounds of Hornady 108 gr ELD-M - $220
220 rounds of Federal Gold Medal Match 107 gr - $220
360 rounds of Prime 115 gr - $520

Buyer has dibs on ammo. Local buyers in CO have priority as shipping this is gonna be a pain

$0 - with purchase or referral that leads to sale. 2023 COPO Camaro 632 Big block #24 of 50 ever to be built. Loaded with graphics package + racers package. PM for more info/price. Never driven never raced. This vehicle is not street legal and comes with Bill of Sale only. This vehicle was factory built by Chevrolet in Oxford MI. Roll cage certified for 8.5 sec or faster. There are only 50 of these made, and sold out in 20 min of open orders. I am the original owner and dealer. Add this vehicle to your collection and get a free rifle to add to your other collection.
Curstis Custom Action DLC coated
Krieger 28in 1-10 twist 1.25 straight
EC tuner
Trigertech
MDT Chassis with premier grip and Every weight available. Rife has 300 rounds and shoots lights out.

18” Proof Research carbon fiber barrel 223 1-8 twist 250 rounds of 77gr IMI down the tube . Includes barrel gas block gas tube. $400.00 OBO shipped. SOLD

Odds are pretty good I'm going elk hunting next year. I've got plenty of rifles, but most of them are geared towards the tactical or competition side and not really setup to be lightweight going up and down steep hills. On the one hand, this is going to be a gun that might end up sitting under a tarp with me in the rain for days on end. On the other hand this could be something that pops an elk on day 1 if I have beginners luck and then it's back in the safe. I'm a veteran and go to rifle competitions usually finishing in the top third of a match. I know everyone on the internet says they can shoot, and I won't say I'm the best by any means, but I'm a competent shot. For the purposes of a hunt, I'd be putting a limit on myself of 500 yards max.

*I'm kinda stuck on the 30-06. I have just always had a soft spot in my heart for it. I know there's bigger and better cartridges, but the 30-06 and I go way back.

*I'm torn between something with bombproof durability like an old ruger paddle gun, vs something in a walnut stock that will have the nicks and scratches of a well worn hunt that will also be a beautiful rifle to hand to my son or grandsons some day.

*I've never had a controlled round feed rifle, so I'm attracted to that more out of curiosity than anything else. I could take it or leave it though because I've ran a bolt action enough times to know a push feed is just fine.

*I'm trying to limit the rifles I'm looking at to an all American classic type of rifle. Something that's built in the USA and always has been. At first I was thinking of a Winchester 70, then realized where they're made. Then I got thinking of a Browning, then realized where they're made now too. Is there a factory option besides a Ruger that fits what I'm looking for? Nothing against Ruger, I'm just trying to look at all my options.

*I understand that a there's nothing more American than a custom rifle, and if I did that I like the looks of the foundation micarta stocks in some combination of a barreled action that can be at 7# ish without scope.

Thoughts?

This coming weekend is the Precision Rifle Expo down in Texas, Sniper's Hide will be attending and hosting a clinic.



I really like the Expo, sure the weather has sucked the last few years, but hopefully this time they nailed it. But it's a perfect place for the precision rifle shooter. Great companies displaying, live fire, hands on with products. Open to everyone, it's everything Shot Show isn't.

Right now we are working a new class style for 2024, so I will be trying out some new devices for the Clinic. After 10 years on my own with Marc and the years prior with Rifles Only I think I have this marksmanship thing sorted out better so I want to try it.

Gravity Ballistics Intro too



Hope to see you all there

**NEW** M240B in factory Pelican with original factory barrel and buttstock AND dimpled Lima barrel and upgraded 6-position buffer tube/stock.

Brand New, less than 20 rounds on factory barrel and ZERO rounds on dimpled LIMA barrel.

This 240 is SEMI-AUTO, but as most of you probably know it is extremely easy to convert this to full auto with very little effort, obviously provided you are an legit SOT or have an unquenchable desire to face-off with an MRAP full of kitted AFT Glitteratti.

The only belted ammo I have in 7.62 is M80A1 (4/1 tracer MIL linked), so I didn’t want to burn through much of it since it’s so pricey and I also didn’t want to destroy my AR500 plates.

I paid $14K for the gun, plus another $2500 for the LIMA upgrade kit — dimpled barrel, 6-position buffer tube and Magpul stock, Magpul bipod (original bipod is better, so I never swapped them, but the Magpul is lighter and more compact). With shipping I have nearly $17K into this Party Crasher.

This sale include BOTH barrels, BOTH stocks and BOTH bipods.

Buyer gets DIBS on belted Unobtanium M80A1 and other exotic ammo. $13,500 shipped with $2,500 Lima kit.

We leave this Friday for a couple of weeks in Italy and Greece (20-OCT - 06-NOV), so we’ll need to close the deal by early this Thursday or wait until we get home.

Landscaper mowed around it. Not funny. Wait, yes it is.

When asked why he didn't call police, the landscaper said in Spanish "It's not my job." When questioned further he shrugged and said "I don't know. Maybe someone he try to rob me...I dunno."

This is so dumb I can’t even comprehend it. How the hell can half the country vote for these assholes?

For shipping prices Flat rate boxes will be used, I will try to use Flat Rate boxes as much as possible, but the brass boxes are huge and take up a lot of space all 4 fit in a large and 2 in a medium. This is cross posted Timestamps will be used FYSA. Items 5& 6I will use a padded mailer or combine as necessary in other boxes.

• 1. Lapua 6.5CM SR Primer Brass (388 Pieces Total) I opened the 3 100 count boxes when I first got them to get the Lapua Club cards.
  • $100.00per Box: Lot Numbers 1 (200pieces): Lot# P01315904/2623820
  • $100.00 Lot Number 2: (100pieces): Lot# P01339001/2754020
  • $88.00 Lot Number 3: (88pieces): Lot# P01034104/0260417
  • All 388 pieces for$ 365.00
• 2. $40.00per Box 6.5MM 143gr ELD-X Part # 2635 (If buyer is okay I can take them out of boxes and compress it all into a small flat rate box you can tape them back together when they arrive saves shipping if you want both)
  • 100 Count: Lot Number: 2230465
  • 100 Count: Lot Number: 2222365
• 3. $120.00 Bushnell Prime 1700 Range Finder: Brand new opened to test it out. Company sent me a new one after a warranty repair. I want to upgrade to LRF Binoos.
• 3. $80.00 Armagedon Gear Game Changer Shooting Bag. It has 50% of the fill you will need more beads/sand whatever you want to add if you want to make it heavier/larger.
• 4. $35.00 A-Zoom 6.5CM Practice Rounds/Duds 10 BNIB 10 used. (Not getting clear container)
• 5. $20.00 Armageddon Armband with 2x Boards.
• 6. $15.00 Cole Tac Cheat Sheet with 3x Boards.
• 7. $350.00 SHIPPED: WHIDDEN bullet point dies with 6mm and 6.5mm sleeves and pointers 0 and 1 and shell plate holder and base.
• 8. $200.00 SHIPPED: Hoover Meplat Trimmer 6mm and 6.5CM. both
• 9. $30.00 SHIPPED: Sinclair 30 Cal Meplat Trimmer
• 10. $90.00 SHIPPED Streamlight TLR-1 HL

Trade Items Considered:

1. MPA Matrix Pro Internal Weight Kit
2. MPA 2 Round Holder
3. MPA Weight Tuning System
4. Accu-Tac BR-4 G2: Arca Spec QD Bipod

Maybe my search powers are weak I did t see this powder mentioned ,or not mentioned in detail other than it was a suitable substitute for Varget .
Has anyone used SW S062 powder - mostly for .308 and 5.56 but 8mm and 7/30 Waters as well ? As Varget has been unobtainable and I was able to score some of this powder and they have more in stock . Just wondering about y’all’s experience with it and exactly where you’ve gotten data .

Fuck Joe Biden.

Biden sold off nearly half the U.S. oil reserve. Is it ... - Politico​

Politico
https://www.politico.com › news › 2023/10/16 › biden-o...

Selling a used GA Precision PPR
Chambered in 6 GT
Has a GA Gladius Action (Defiance Tenacity)
Manners t2a stock
Arca Rail
Bartlein 26" MTU Barrel 1/7.2 Twist
Triggertech Trigger
1600 rounds on barrel

Asking $2100 shipped

Login to view embedded media

The USSC issued a stay on the "ghost gun" injunction out of Texas. It is essentially the law of the land now. Thanks Roberts and Barrett

80 year old store owner takes to POS.

"He shot my arm off."

Login to view embedded media

Hey guys, I am looking at switching from my NX8 2.5-20 on my .308 bolt gun (KRG CHASSIS ARC action) to something new. I’m looking at the ATACR 4-20 with mil xt MRAD reticle vs the Leupold MK5HD 3.6-18 with PR1 reticle MRAD. Most of our work is up close but we train out to 800 yards plus sometimes and also I would somewhat like to use this rifle for PRS matches as additional training. Will be using a Spuhr mount either way. One of the issues I’ve had with the NX8 is eye relief and eye box but with the current setup I have, I cannot move the scope any closer to my eye. Thanks for the input in advance!

So I was looking to buy a McMillian A1-3 stock that was already set up for a Rem700 S/A. The stock was just like primes no paint so I called them to see if they would paint it. They said they wont open the box even to paint it but I can buy it and then ship it right back to them to have it painted. How fucking lame is that?I just wanted a nice paint job on it and not send it to some dude with a can of Krylon in his basement. They wont do it while its there.

Login to view embedded media