Hope it holds zero and handles recoil because if it does Im sure glad Ive held out over more expensive options! What is the word out there on first hand experiences???

Pictures posted when I get home tonight.

Berger 105s:
- 600, new, but not in original packaging. Originally bulk purchased from Mile High.
Sold

Berger 130 AR Hybrid OTMs:
-500 brand new, still sealed in the box.
Sold

*In need of some ultra low 30mm rings, something lightweight and sub 1" height. Open to a partial trade with cash on your end.

Please PM me for details. Payment via PP F&F, Venmo, or Zelle.

Does anyone here either own or have experience with the Toyota Land Cruiser?
What are the good/bad features of this vehicle?
I could start with price and gas mileage being an issue however the dependability is off the charts great from everything I have read.
Thanks...

Anyone just douche everything out with gun scrubber then once clean and dry hit with hornady dry lube ?
Seems like for guns that are shot and then set a while before being shot again , rubbing them wet just makes them gum up after they set.

What is your cleaning and lube procedure for suppressed semi autos ?


Oh and how much accurate barrel life will you have if you shoot 30-40 rounds in 120 seconds ?

I’m having issues with the grouping of my rifle. I know something is wrong. The gun is a LWRC IC-DI 556. The optic im using is a Steiner T432 prism. I went to the range today with 90 rounds of Norma 233 55 grain FMJ. I was doing a 100 yard zero. I sand bagged the front of the gun. I torqued everything to manufacture spec and put paint pen on all points of movement. I’m not impressed with the groupings.

I’ve had the same problem previously with this exact rifle and optic setup. I first zeroed the rifle with spam can 55 grain Tula and basically had the same thing happened but just with a wider inconsistent spread that was a few inches wider,compared to Norma. With everyone’s experiences what’s going on with my grouping. Im having a consistent wide spread.

Up for grabs is a BNIB Thunderbeast Magnus (Black), this is on a Form 3. Unit is brand new, see TB's specs below:

- The MAGNUS is the quietest .30 cal suppressor on the market for everything -- .223's, 6mm's, 6.5mm's, 7mm's, and .30's -- up to .300 Norma Magnum. The only thing quieter is a 338 ULTRA GEN2, which is larger.

The MAGNUS-SR shares the same SR (Secondary Retention) mount as our Dominus-SR, Dominus-K-SR, and 338 ULTRA SR. This model is 0.70-inch longer and 2.9 ounces heavier than the CB version. This version has the same Hard-Use/Full-Auto as the DOMINUS-SR, ie, Lifetime to exceed at least 10 SURGE cycles on a 10.5" M4 / MK18. The other versions of the MAGNUS are NOT full-auto rated due to the mount being insufficient.

$1550 Shipped. PP via gift or add 3.5% for fees.

Leupold VX3 2.5-8x
Matte
Glass is clean and exterior in great shape
Asking $325 SOLD

Leupold M8 12x
Matte
Elevation Target Turret / standard windage
1/8th dot; glass and exterior are clean
Asking $425

Nightforce NXS 12-42x
NPR2 Reticle
Sunshade
Glass is clean and exterior in great shape
.25 moa clicks, illuminated
Asking $1500 Sold

Picture coming soon

Pm me if you have any questions

Excellent condition Tangent Theta Gen 3 XR 5-25x56 non AIF in Spuhr rings with Spuhr Raptar / Radius mount. Comes with everything as new, boxes, docs, sunshade, etc.

May consider a partial trade on a lighter hunting optic, Swarovski spotter, and am always interested in a Hensoldt 4-16x56 or 3-12x56.

4k shipped.

Used kestrel 5700 w/o link

Works like it should have had no problems with it. Selling because I upgraded.

$325 shipped

GA Precision 6GT barreled action
Tempest 3lug action
Brux barrel with ACE brake
2 AI AW magazines
Cerakote graphite black.
BA has 100 rounds down tube, bought this for my daughter and she prefers her 6BR so it’s time to let it go. It has the straight bolt handle and there is a small mark at the back of the ejection port from being in the safe. I’ll also throw in the TT trigger.
$1,500 shipped to your FFL and I’ll cover shipping costs. If you need anymore pictures please ask.

I’ve had this around for a while but it’s at the FFL now and ready to ship. It’s unfired since it was built because I never bothered dropping it in a stock. Built by Precision Rifle Co.

It features the correct Lilja 1:10 twist barrel, finished 24” and threaded 5/8x24. Everything is cerakoted FDE. Action has been trued with new .250” recoil lug.

This is built on a LONG action. No trigger included but the thread protector will be on there.

$1,400 shipped to your FFL. No trades on this one.

Knee meniscectomy - recovery

Going in Friday to clean up a radial tear in my medial meniscus. For those of you who have had this procedure, what was your recovery like? Any stupid shit to avoid?

Thanks

This is awesome be sure to watch the entire thing.

Login to view embedded media

Some festies are good, notice the foreign accent on some of the "protestors"

Short Action Customs Barrel Vise. Includes everything that came with it new. Vise, arca clamp and set of 5 bushings. Only used once. Asking $250 shipped

I wanted a rifle built that was perfect for everything. I ended up with a rifle that wasn’t perfect for anything.

Rail guns, used in experiments at Eglin AFB

on one experimental shot Windows were shattered and metal doors were ripped from their frame in the community. Since Eglin is 2/3rds the size of Rhode Island, and towns are located a miles from the Eglin test sites, one can imagine just how powerful these weapons were.

Want some real long range power?

I have a XLR Element 4.0 MG and a MPA Matrix chassis, both inlet for Rem 700 LA pattern actions. Seeing as I have the chassis' picked out already, looks like the BAT Vampire is out of the race.

The Matrix I'll use for precision shooting 6.5 PRC and/or 7 PRC. In this setup I'll care less about weight, maybe even adding weight to the chassis to offset the weight lost in the action, if needed/desired.

Depending where I go hunting, I'll use the XLR chassis with a 16-20" 308 barrel and an Accurate Mag 308 LA magazine (https://accurate-mag.com/shop/magazines/308-win-long-action-sssf-magazine/) or a 6.5 PRC/7 PRC barrel. The 308 would be better suited for areas that don't have long unobstructed line of sight (300-400 yards max, but more likely taking game within 50-150 yards) while the 6.5 PRC & 7 PRC will be better when I could use more reach and/or hunting larger game out of state.

Actions I'm considering:
- Zermatt Origin = Kind of a heavy option, I'd prefer to go lighter. I've read that there's sometimes binding issues with the interchangeable bolt heads, making it not the smoothest action.
- Impact NBK = Looks great but I don't know if the LA will take Proof 737R prefit barrels for SA (sounds like the SA NBK will will take 737Rs).
- Defiance Ruckus Ultralight = lots of people are saying stay away since it changed hands/went up in price
- Defiance anTi-X = lots of people are saying stay away since it changed hands/went up in price, also I don't know if it takes AICS mags and Proof's Ruckus prefits.
- Kelby Nanook = not sure if that window cut out becomes an issue for gunk getting in very often or not.
- BAT Vesper = looks amazing, but is overbuilt for my needs (6.5 CM/308 to 300 PRC), but again looks amazing so I'm not sure if there's anything better but it's also the most expensive and there may be smoother bolts out there, better timing, etc etc. for all I know.
- Terminus Kratos Lite = not sure if that window cut out becomes an issue for gunk getting in very often or not. I like that it's a shorter bolt throw. Wish that it accepted Proof's SA prefits.
- Curtis Helix Hybrid Hunter = not sure if that window cut out becomes an issue for gunk getting in very often or not. I like the idea that the bolt is smooth on the bottom so that it doesn't potentially scratch my Lapua brass.
- Pierce titanium skele-ti = seems titanium isn't ideal according to some
- Other

I want to start a bolt action rifle build.

Long term I want this for hunting and target/distance shooting. I’m in the PNW so deer, elk etc.

I want to be able to swap calibers/bolt faces. At home not a barrel swap at range etc.
Say I hunt with 300 prc but want to shoot some target with 6.5 creed.

I really like tikkas but know they have mag/chassis issues sometimes.

How about savage? Stick with tikka?

Want to buy a factory rifle and then get a chassis and additional barrels.

Hey guys. I'm selling one of my Amp Annealers (Mk2 with Aztex) along with a #10 pilot, a #73 pilot, and a shellholder. I bought this annealer about a year ago, and I've probably put about 1000 rounds through it. It works like a dream; I just have two for some weird reason lol. If you want just the annealer, I'll let it go for 1275 dollars shipped, Paypal F/F preferred.

Casemate, hopper, stand Sold

If you want the casemate and hopper separately, SOLD takes the hopper(large rifle plate included) and casemate.

Again, PP friends and family preferred, pictures below. Thanks guys!

Why mastering the basics could be a lifelong project with the most upside 



I have spoken with experts across many disciplines. From academia, martial arts, and Olympic skiing; from rock climbing, surfing, and special operations; from pistol shooting to precision long-range rifle competitors. Every single person mentioned “mastering the basics” or mastering the fundamentals. Universally the concept of fundamentals seems to be a human constant. So, let’s think about this and how it relates to your goals a little closer and why it seems like only the experts are saying it while the rest of us are always looking for the next trick or purchase to skip ahead on the path we’ve chosen to embark down.  



Fundamentals equal Foundation

How do I feel about the statement “master the basics”? I think it is not so basic at all. Before we get...

Click to expand...

Continue reading...

This guy needs a ball pen hammer between the eyes.

Doorbell camera footage shows alleged package thief swipe ...​

wric.com
https://www.wric.com › local-news › chesterfield-county



2 days ago — The FedEx delivery driver told Saenz that the package she was delivering — an iPad ordered by her husband — had been stolen. Saenz then checked ...

Pricing includes shipping CONUS. Cross posted.

• 
  
• One (1) box, 100 bullets total, Hornady 110 grain ATIPS. $80.00
• Three (3) unopened, 1 partial box of 73, 373 total bullets, 108 grain berger elite hunters. $180.00 SPF
• One (1) box, 100 bullets total, 112 grain Barnes Match Burner. $32.00 SPF
• Two (2) unopened, same lot, one (1) partial box of 90, 290 bullets total, Hornady 108 eldms. $105.00 SPF

If you buy everything, I will make you a better deal. Preferred payment is Venmo, paypal F&F, or USPS M.O. Shipping is CONUS only.

Like new TT Diamond R700 single stage Gold Edition. Bought this from their Black Friday sale in 2020 and it sat in the safe till the beginning of this year. Put this in my daughters Vudoo to see if she liked it but she preferred her B&A. It has around 100rnds through it. Functions as it should with no marks or wear.
$250 PP TYD and I’ll cover fees and shipping. First “I’ll take it “ here gets it.
Thanks