A New Theory Indicates Physical Reality is Just Quantum ...​

Interesting Engineering
https://interestingengineering.com › Science



Oct 2, 2021 — A New Theory Indicates Physical Reality is Just Quantum Mirrors. There may be no independent physical substance constituting our reality.

Login to view embedded media

*NO LONGER FOR SALE* I’ve decided to keep it because I’m not going to give my shit away to low ballers.

I know I'm going to regret this but unfortunately at the time being other stuff takes priority. I'm considering selling my custom Impact 223 or parting it out. I will not part it out below full barreled action. USPS has just made it an incredible PITA to ship pistols and receivers even through FFL's now with a requirement of a signed affidavit so this MUST be able to be shipped as a "rifle" individual to FFL therefor I will not sell just the action or barrel.

Everything except for the barrel was purchased brand new by me this year. The barrel I bought second hand like new with less than 100 rounds on it from the original owner who had it turned at Altus and the markings and headspace time perfectly. I've put less than 200 rounds through the rifle on 3 range trips and it’s an absolute hammer. It's sub 1/2MOA with Norma and Federal 77gr SMK, Federal 77gr TMK, and sub 1/4MOA with 77gr Berger. Every component is in like new condition.

- Impact 737R with 223 bolt and Area 419 Knob.
- 223 Wylde 1:8T 20" Proof CF machined by Altus and Cerakoted on the ends. 5/8-24 threads.
- TBAC 30CB brake.
- Triggertech Special 2 stage pro curved trigger.
- MDT HNT26 Folding ARCA.
- Nightforce NXS 2.5-10x42 MIL-R in NF UL 1.125" rings.
- Impact action wrench. (not pictured).
- Accurate 223 magazines. I'll include 1x 5rd or 10rd with the purchase of the complete rifle or rifle and scope package and have additional available to the buyer for $50 each.

I also have a brand new Impact 308 bolt assembly without bolt knob (threaded stud included) available with or without the rifle for $450.

To build just the rifle (barreled action, trigger, chassis, brake, 1x mag) it would cost you $5000 before any tax, shipping, or transfer fees. The optic, rings, and action wrench another $1900 on top of that.

My pricing is as follows:

$6200 shipped. Full turn key setup with everything listed above MINUS THE EXTRA BOLT OR ADDITIONAL MAGAZINES.
$4700 $4500 shipped FIRM. Complete rifle with action wrench MINUS OPTIC, RINGS, ADDITIONAL MAGS, OR EXTRA BOLT.

Part out pricing:

$1400 shipped FIRM. MDT HNT26 complete chassis. No magazines, how you would get if you ordered it direct from MDT. *SOLD*
$3200 $3000 shipped FIRM. Complete barreled action with action wrench, trigger and brake.
$450 $425 shipped FIRM. Impact 737R .308 complete bolt assembly new never used without bolt knob.
$1500 shipped NF NXS 2.5-10x42 with rings.

For now I'm not parting out anything other than that. Any acc's or anything perspective buyers don't want with options above will be listed in a separate ad once the rifle has sold.

If you're local to Tampa I can do FTF (all state and federal laws apply) and knock $50-$150 of the prices to reflect shipping depending on what you're buying. Cash payment for FTF.

Payment method other than FTF is Zelle, Venmo (for well established members with positive feedback), USPS MO, certified/cashiers check, or personal check (won't ship until clear). NO PAYPAL.

NO TRADES.

Stock only. Has flush cup on right front . $1,400

These are the “plus 1” Schmediums made for Jake Vibbert at JC Steel. Lucked out and got a few, couple lame-ass buddies backed out, lol.

If you could only have one bag, this would be it! It’s a Schmedium with an extra inch on each side to get your mag, etc to clear rocks.

Brand new, never seen a barricade.

$125 shipped each. $215 if you want both of them. 2 for sale.

Login to view embedded media
So at least 37 murder cases effected, poor handling of evidence and -wait for it been disciplined 17 times for not properly handling evidence and or not managing cases . Went on for years !!!!
Brady violations as per Brady lost via 1963 Brady vs Maryland.

So not one hero above or below her in the chain of command cared enough that murder and child sex crimes cases were being run by an incompetent twat. They sure fucking look out for one another don’t they

Nightforce 5-25x56 MOAR- C545 in great condition
The glass is in excellent shape with no scratches, smudges, etc. I have the throw lever and beauty ring, box
Asking 1700.00 obo shipped
PayPal F&F

MPA Matrix for right hand rem 700 short. Comes with internal weight kit, 2 round holder, dope card, thumb shelf, and cerakoted multicam by weapons works. Used very little. Was on my 223 trainer.
$1100 shipped

Selling my custom Surgeon action in an AI chassis with a trigger tech diamond elite 2 stage trigger built by SAC. The rifle shoots 1/4” moa even with factory hornady loads and is extremely accurate. Selling since I don’t get the time to shoot long range and funding a home project. Rifle has a white box Minox ZP5 sitting in a Spuhr. The atlas does not come with it but can be included if the buyer wants to buy it separately.

Selling as a combo but if the rifle sells first I’ll split the scope and mount separately. The build was just north of 5k and with the mount and scope I have 8k+ into this setup and it’s absolutely lights out. Round count is 213 and I have some unfired ADG brass that hasn’t been used I can sell separately if the buyer wants it. I’ll include 5 boxes of ammo if the whole package sells at once. PayPal FF, Zelle, Venmo works.

Rifle package shipped— $6,600 now $6,000 now $5800
Rifle without scope/ mount— $4,400 now $4000 now $3800

Minox ZP5— $2,250 now $2,150
Spuhr— $325

Picked up a brand new Bergara HMR Pro in 6.5 CM.

When I picked it up, I ran the bolt and felt some roughness. It felt rougher than a B14 I tried at a Bass Pro last year, but didn’t think much of it as another HMR Pro I checked at another dealer seemed to also have some roughness.

While setting it up today, I reached out to an acquaintance who owns the same exact HMR Pro about the bolt. He said the day he bought his, he could point the muzzle toward the ceiling, unlock the bolt and the bolt would just drop straight out with no resistance.

Even after working the bolt around 200-300 times, while it’s a bit smoother, it’s definitely not dropping out like his did when brand new.

I cleaned the entire bolt and put a spread a very small amount of BoreTech Extreme Grease HD on the lugs before I worked it.

Still doesn’t seem that smooth.

Thoughts?

Would expect this to be smoother or as smooth as the non-premier B14 was that I tried.

I have 400 cleaned, 3 times fired Lapua 6BR brass and a brand new box of 500 Berger 105gr Hybrids. I opened the box of Hybrids just to compare them to my 107’s and 110’s. Will ship the complete package deal to your door for $650. Payment through Facebook Friends and Family.

Got 3 SR brakes up for sale. All three come with new peel washers and have never been fired. No packaging. All are 30cal.

one 30cal 1/2x28 left, 5/8’s are both sold.

Asking 110 each, shipped, PayPal friends and family preferred.

Selling two NF scopes. One is used and some wear x32, and the x42 is new mounted in rings only, but fell and got a small ding behind the turret.

2.5-10x32 has a NP-1 Reticle. Illuminated. MOA .25 turret Asking $1250 shipped and PP fees covered. Just scope and covers, dont have the box. SOLD TO OMBSPEC


2.5-10x42 has a Mil-R Reticle. Illuminated. .1 Mil turret. Asking $1450 shipped and PP fee covered. Have all original box accessories, and box itself. SOLD TO Kspence49



x32 Photos

















x42 Photos

Atlas PSR bought from a member here, after I received it realized it had a Gray Ops Inc Arca QD mount. I don’t run that type of rail.
Asking $270 shipped in lower 48 with PP Fee included. SOLD TO Texasac22

Wanted to put a hunting rifle together for my daughter to grow into and would work for her as she got older.

TL3 SBR
PVA Osprey 12.5” 6.5Grendel fluted by LRI
TT Diamond
Manners MCS-CS
Salmon River ARCA rail
AB Raptor 8
Leupold MK5 in ARC rings

The Strong Arm of the Masssad . Referred to as the unit . The real meat eaters of Israel .

Anyone ever work with or come across ?

All ammo shot was factory Hornady.

The first 2 pieces of brass are from American Whitetail 165 InterLock

Next 2 Black 168 A-MAX

Then Whitetail 150 InterLock

Gas setting at 3, weapon would not cycle reliably with any of the ammo on 2.

Was not tested with can.

LOTS of flattened and cratered primers.

Some state goons arrested worshippers at a church service cause pension and duty and such?


It will only cost the tax payers $300,000 on top of the salary and medical and pension the heroes already soak them for . Think how much safer the streets were after these arrests and it is odd cause of all the heroes that told us they didn’t do this shit .

Selling my Rim-X with 22” Benchmark barreled action (no trigger). Trigger pins included. Barrel contour is MTU. One magazine included.

I used this for maybe four or five NRL22 matches. Probably has right around 1,000 rounds on it. Shot well for me, and the balance was good out of an MPA BA Comp with front weight kit. I wasn’t able to lot test Lapua, but I had good luck with SK Long Range, SK Rifle Match, and some lots of Eley Match. The Eley would have one or two light primer strikes per box of 50, so I didn’t use it as much.

I’m only selling it because I have two and can’t justify keeping both. I bought this within the last year.

Asking $1,600 shipped and insured to your FFL, unless you want to do local pickup in the Peoria, Illinois area . PayPal F&F preferred, but can also use Venmo or Cash App.

22 LR, CZ 457

Bravo Chassis with tool-less height/cant adjustable buttpad and slim profile buttpad. Original buttpad also included.

Lilja / Area 419 straight fluted barrel, 16.5" length.

Timney Trigger

DIP picatiny rail.

$1200 OBO. I've spent about $2000 putting this together. Probably 500 or 600 rounds down the barrel. It shoots great, but I built it to mimic a custom rem 700 that I'm selling and I don't really need it anymore.

I would consider parting it out, but would prefer to sell it all together.

The scope and bipods aren't for sale.

Want to start shooting centerfire prs.

Thought I wanted a dasher since they seam to he popular but heard there are issue with them feeding. 6 cm barrel life kind of scares me especially for just entering into centerfire I'll need to practice alot

Things that im.looking for are respectable barrel life, brass availability, reliable function/feed

Bra brx gt dasher cm.....or you name it

So my kid works at a grocery store in Arizona and got roped into signing up for the union. In case you are not aware its a right to work state and union dues are not required to work there.

A manager talked her into it while she was on shift, she is under 18 and had no idea what she signed up for. They charge $48 a month for dues, $576 a year! She only works part time and that is a huge chunk of change for her.

I read where you can only cancel once a year and its a small window??? This shit doesn't sound right to me. Any help is appreciated.

6.5 creedmoor bergara premier hmr pro in a krg bravo. Looking to sell everything as a package.

I put the barreled action in krg bravo chassis with spigot and pictanny rails. It comes with-

- FLat shoe triggertech special trigger.

-20 moa rail with arc mbrace scope mount 20 moa.

-Athlon cronus gen 2 with a small nick from prs.

-3 boxes of factory ammo 147 eldm and 5 boxes of factory brass with other hornady brass as well count unknown. -

-It also comes with almost 200 alpha brass lost I think 5 In match.

-Redding die set with bushing and rcbs full length die. Seater is micrometer seater.

-10 rd mdt mag with binder plate

-6.5 muzzle brake mbm self timing.

-Also has roughly 350 maybe a little more 147 eldm bullets and almost 8 pounds of h4350. It was shot 200 times before I bought it then I shot it maybe 150 times.

Package deal for everything listed rifle scope bullets powder ect. $3650

Pics coming later....... issue uploading