I have a basically brand new in the box Bushnell XRS 3. I don’t need this scope right now as I am never home to use it. It has only been taken out of the box to be looked through. I would like to sell ASAP and am offering a smoking deal for a great scope. No trades at this time. $1300obo shipped and insured. PayPal FF. Thanks. Jason 530-990-0539

Up for sale is a like new amp mark 2 annealer. It comes with everything amp annealing includes. It has always been covered with a dust cover when not using. I have only Annealer 300 pieces of brass through it. Selling beanie I don’t reload much anymore and I need the money. I paid $1595 and I’m asking $1185 shipped to lower 48. If you have any questions please let me know.

Also do to my busy work schedule shipping can take up to 5 business days. But I will do my best to get it shipped asap.

Selling a used but in great condition Labradar with everything shown for a friend

$900 shipped

I’ve got a 20” 308 tikka that doesn’t get much use, and was looking at a RRA x series 6.8 ar15, 18” fluted barrrel… thought if I pick it up, will the 308 still serve a purpose for 500 yards and in?

I’m sure both rifles with glass probably weight about the same, but the 6.8 is semi auto.

Which would you take ?

My rifle is almost due for a re-barrel. Might as well refinish the action at the same time. The Cerakote has worn in a few spots. Is there any harm in doing this? Media blasting the action to remove Cerakote? Will this in any way affect the tolerance/clearances of the action and bolt? Action is Cerakoted, bolt is parkerized.

Between a Lucas vs Possum Hollow vs generic cheapie bore guide-

What are you getting?

It keeps the rod centered. Depending on rod length, maybe keeps the jag/tip of rod from hitting the muzzle?

If most jags and rod tips are soft brass, will they damage a steel barrel?

Muzzle?

Compared to a bullet traveling down a little bit faster than you can shove a rod down a bore guide... won't the bullet do more damage? Or not, because it's done uniformly down the rifling?

Thank you for educating

Looking to purchase a boat and want to move a couple big boomers.

First is a new never fired JJ ROCK Co 50 BMG. Essentially a TAC-50C but has a 1:13 twist barrel. Comes with Pelican case and extra magazine.

$9500 $9000

--Rifle specs--
Action- JJR-50 BMG
Trigger- Jewell with bottom safety
Chassis- cadex defense dual strike
Muzzle break- APA
Barrel- 29" 1:13 Twist
Case- Pelican 1750

Second is a 375 Cheytac I purchased from the forum. Built by CTSR (Curtis Tactical Suppressors and rifles) the rifle has 311 rounds down the barrel at 2850 fps from the previous owner. I have not had an opportunity to shoot this rifle myself. Will come with 100 pieces of 3 times fired Peterson brass and Pelican case.

$5500 SOLD

--Rifle specs--
Action- pierce 10x
Trigger- trigger tech diamond (flat)
Chassis- cadex defense dual strike (1.60 sniper gray)
Muzzle break (t5)
Barrel- k&p 32" 1:7 twist
Magazine- cadex
Case- pelicon 1750

I am not even bashing the cops in this story. They are just doing their job and they have no choice when they get a call. And without a city ordinance to pay the king to sell lemonade there would be anarchy.
Whoever wrote the story should have outed the Karen (organizers) that called on this little girl.

I’m putting together a more accuracy focused build but I still want the gun to be light enough to carry around for hunting. I’ve settled on a 16” barrel. I don’t mind the barrel being heavier than something like a Criterion Core but I’d still like to keep the weight down if possible. I don’t mind the extra weight if its well balanced. My number one priority is accuracy though since this will mostly be used for punching paper at the range (being honest).

I’ve narrowed it down to the following options:

Compass Lake 16” Douglas Tactical https://compasslake.com/product/ready-to-ship-tactical-3/

White Oak 16” SPR: https://www.whiteoakarmament.com/16-spr-barrel.html

White Oak 16” SDM: https://www.whiteoakarmament.com/16-sdm-barrel-1-7-twist.html

Larue Stealth 16”: https://www.larue.com/products/larue-accuracy-package/

Ranier Ultramatch Mod 2 16”: https://www.rainierarms.com/rainier-arms-ultramatch-mod2-223-wylde-int-barrel-16/

Ranier Mountain Mod 2 16”: https://www.rainierarms.com/rainier-arms-mountain-mod2-5-56-nato-barrel/

Odin Works Intermediate 16”: https://www.odinworks.com/223-Wylde-16-1-Intermid-p/b-223-16-int-tg.htm

Wilson Combat Recon 16”: https://shopwilsoncombat.com/BARREL-556-NATO-RECON-16-ROUND-STAINLESS-GLASS-BEAD-1-8/productinfo/TR-556RCIG16RT8/


Which would you choose and why? The Ultramatch is the most expensive and $400 seems expensive to me for a barrel but I’m willing to pay it for a barrel that clearly stands above the rest.

Stiller tac 30 AW, work done by Ian at elemental industries. 91 rounds down the pipe. 1:8 twist 6.5 creedmoor 26” Krieger barrel M24 contour, gen 3 little bastard brake included but trigger is not would prefer to keep the chassis also. Asking $1600

This BA is a hammer.

Can provide load data that worked for me if need be but honestly haven’t shot anything out of this thing that hasn’t shot good. Ian builds amazing rifles.

If you need more pics, let me know. It’s just the pics I have right now, I haven’t taken it out of the chassis.

Located in NW GA, would prefer money order as payment. Name on the Local ga forums is c drill97, 100+ feedback on there and know and shoot with several members on here as well.

Hey @MDT_Josh @MDT_OFFICIAL can you include one of these in your kits next time ? My CNC operators are nice guys, but they dont like sharing.

(Otherwise its awesome. Thanks !)

A man was crushed to death by a trash compactor after climbing into the garbage chute with the help of two people, according to the New York Police Department (NYPD).

The man’s body was found in a Brooklyn apartment building on Gates Avenue in the Bedford-Stuyvesant neighborhood at around 4:00 a.m. on Friday.

Surveillance footage reportedly shows the man entering the garbage chute while being assisted by two people who appear to be a man and a woman. After the man enters the chute, they hold a phone flashlight to give him light, presumably to light up the dark space, the New York Post reported.

Fifteen minutes later, the man’s mutilated body was found dead in the compactor. He was believed to be in his 50s, PIX 11 reported.

Police have not yet determined why the man entered the garbage chute, although some neighbors speculated he may have been attempting to retrieve his keys.

“Why would you go get your keys in the incinerator?” A resident of the building told the Post.

“I’d leave them down there, wait for maintenance to come or get another pair made. … I dropped my keys in an incinerator one time and I left them there,” the resident added.

It is also unknown if the man who died was a resident of the building.

The incident does not appear to be criminally motivated, as the man climbed into the chute of his own accord, police said via the New York Daily News.

Bet he won't do that again!

I’m selling a “medium”(308win, Creedmoor, etc.) Tenacity action with AW mag cut. I’d like to offer to chamber up a new barrel for the buyer, and include a trigger tech diamond flat shoe, and either an AREA419 sidewinder or Axis Worx Enabler brake.
It was one of my PRS rifles… it had a 6creedmoor barrel on it but that’s pretty much shot out.
Rather than sell the action, trigger, and brake separately I want to sell it as a barreled action with a new barrel on it and the parts mentioned above for $2000.

I have BRUX barrel blanks on hand.

Text me at 4804678090 to discuss it or get pics.

I can have the new barrel chambered up and finished in one week.

Everything is in great shape. I’m selling it because I need new glass.

Thanks

“The gun used in the fatal shooting on the Rust movie set could not have been fired without pulling the trigger, ” far-left ABC News reported, summarizing an FBI forensic report.

This is in direct conflict with actor Alec Baldwin’s claim he did not pull the trigger on the gun that killed cinematographer Halyna Hutchins last year during a camera rehearsal.

“No, no, no, no, I would never point a gun at anyone and pull the trigger at them, never,” Baldwin told George Stephanopolous in December. “The trigger wasn’t pulled. I didn’t pull the trigger,” he added.


The FBI says otherwise:

Accidental discharge testing determined that the firearm used in the shooting — a .45 Colt (.45 Long Colt) caliber F.lli Pietta single-action revolver — could not have fired without the trigger being pulled, the FBI report shows.
With the hammer in the quarter- and half-cock positions, the gun “could not be made to fire without a pull of the trigger,” the report stated.
With the hammer fully cocked, the gun “could not be made to fire without a pull of the trigger while the working internal components were intact and functional,” the report stated.

Click to expand...

As of this writing, Baldwin has yet to comment on the report.

Normally, we expect the corrupt FBI to cover up for a left-wing sacred cow like Alec Baldwin. My guess is that if the FBI could have covered up for Baldwin, it would have. Such a cover-up would benefit Democrats in two ways: 1) protect their pal Baldwin, and 2) make the eeeevil gun that mysteriously shoots itself the villain.


But even an FBI as corrupt as this one has to draw a line somewhere. As much as the feds might have wanted to protect the left’s precious Alec, claiming a gun fired itself is a bridge too far.


This FBI report also confirms Breitbart’s analysis. At the time, we detailed the lack of credibility in Baldwin’s claim that he did not pull the trigger—which is only credible if you are dealing with a faulty and broken gun that can only fire by snapping back the hammer.


It should be noted that nothing in the FBI report disputes another possibility: that Baldwin drew the gun, depressed the trigger during the draw, and kept it depressed. With some single-action revolvers, it is possible that if you keep the trigger depressed, you can fire the weapon by pulling back the hammer, which allows the hammer to snap forward and fire the bullet.


Baldwin did admit to Stephanopoulos that he cocked the gun while pointing it at the doomed Hutchins.


“I cock the gun, and I go, ‘Can you see that? Can you see that? Can you see that?’ And I let go of the hammer of the gun and the gun goes off,” Baldwin told Stephanopoulos. “The trigger wasn’t pulled. I didn’t pull the trigger,” he added.


It is possible he had the trigger depressed the entire time, and when he let go of the hammer, it snapped forward and fired the fatal bullet.


In that case, he still pulled the trigger but might not have been conscious of the fact he had.


Nothing else makes sense.

I have never shot any of these. I will state which ones are new and which I bought used.

1) GA Precision Custom Built Rifle, Tempest Action, 6mm Creedmoor, 17lbs $4,000

2) Daniel Defense Delta Pro 5 6mm Creedmoor Coyote Tan 26” Barrel. New- never shot. $2,500 brand new, never shot.

3) Accurate Arms Custom 7mm 08 Youth or Womens. Built on a Remington Action. $2000 rifle. 2900 for rifle ammo and Swarovski Scope.

4) custom nesika model V. 300wm that is probably one of a kind. Detachable box magazine. $3,500

5) PT&G Branded Stiller action

• AG Composites, Chalk Branch Adjustable Carbon Fiber Stock with premium paint
• Bartlein 30" Med Palma, Left hand gain twist. 1-10/1-9. (Ends up 1-9)
• WTO Brake
• TriggerTech special trigger with pro curved shoe
• Atlas Bipod Pic Rail
• 20 MOA Stiller rail
• Hawkins Bottom Metal
• AICS CIP Magazine
• Cerakote Elite
• Bedded
• 10.1 Lb
• 104 rounds of slow fire. Very accurate and will push a 210 at 3200 FPS.
• $3,000
• This is the ad from when I bought it.

I will post more tomorrow.

I think I caught a cold so with all my free time I’ve decided to tackle some serious issues.

First off, let’s discuss something I’ve always found a little odd.


Why can I reach out to my gunsmith, order a chamber cut for whatever the heck I want? I can go as far as ask for a chamber cut to a specific projo, awesome. When the rifle arrives it comes with all kinds of awesome data. Twist rate, contour, rail screw dimensions, you know all this detailed stuff.


Here’s the rub…..why doesn’t the gunsmith tell me the distance from the bolt face to the lands? Wouldn’t this be useful?

Wouldn’t this be ideal for handloading? For checking barrel wear?

Or did I have too much cough syrup?

Proof stainless .223 barrel 20” 7 twist maybe 50 rounds fired to heavy for what I’m looking for.
Would like to trade plus cash for a carbon 223 22 Nosler or 204 barrel ar15.
Or will sell for $400obo tyd

Could be a game changer

SOLD - Forster 308 die set
$300 - 500pcs of Lapua 308 brass (2-3x fired), 100pcs of Eagle Eye.
$30/100 - Primed 556 brass w/ CCI41s. 700mixed headstamp (PMC, Fed, etc), 122 Lake City, 171 SIG
SOLD - 248 (by weight) 175 SMKs

Looking to sell my Premier 3-15x50, come with instructions and box, and PR logo, tenebraex caps
$2200 shipped.

G2Mil Reticle, 28mil DT/MTC/CCW turrets.
The turrets have a little love on them, tube has some very light ring marks if you look, but glass is absolutely perfect.
SN is warrantied by ATI/Tangent and have a confirmation email from them July of this year.

Its boxed up ready to go.
Can send any more pictures you want/need

I have had a long time wish to test, does the small primer pocket has anything better, than large rifle primer in Lapua brass and
popular 6.5 Creedmoor caliber.
Received finally the LR brass from Lapua to test it.
Competition Electronics DLX chrono was the measuring tool, i like it better than labradar, it will work, no matter how you shoot thru it.
I have read a document few year back in G&A, and there the sr primer pocket was better.
I had 123gr Scenar and Vihtavuori N150 38,6gr in both cases, both cases were brand new, none shot.
SR is CCI magnum 450, and LR CCI 200.
Check out the results.
Login to view embedded media

With the amount of people that message me trying to Illegally purchase Firearms from me I have to ask!