size

I was wondering if anyone could tell my what size rings (LOW, MED, or HIGH) that I would need for my setup. I have a Remington model 700 SPS Varmint. I am purchasing the Millett TRS-1 4-16x50 (30mm) rifle scope. I was also thinking of going with the Millet short action Picatinny Rails. Could...

Does anyone know the thread size for the now Hornady Chamber-All tool (formerly the Stoney Point) for measuring seating depth to the lands? I want to make a modified 7-08 case but don't know what size tap I'd need......

Looks like about .5 mils, but anyone know for sure? Tried the search, didn't see a specific answer to this question... Thanks in advance

Looking to order some Butler Creek flip up lens caps for my new super cool USO SN3 3.2-17X44 TPAL. Seems that the eyepiece and objective size falls between the available sizes. Anyone know offhand what size to order for the eyepiece and objective? Do I order the larger size and shim or do I...

I'm in the market for some long range steel targets, let's say out to 1000 yards. My rifle is 0.75 MOA, but I've never shot it past 500 yards. My scope magnification tops out at 15x. I'd like to buy some steel to practice that these longer ranges. What is a good size not only to see, but...

My dad gave me his USP45 for Christmas and I've been thinking of putting a threaded barrel on it and buying a can. What are the functional differences between the SOCOM 45 and the civilian USP45, besides the threaded barrel? Will there be cycling issues with all that weight on the front of the...

What flip-up size for the Millett 4-16x50, eye and objective? ... and yes I used the search function.

What do you think is the best way to get to a wildcat caliber from a parent case, neck up or size down. I am looking to make a 30-8mm and a 338-8mm. The 338-8mm is a no brainer (perfect for me), neck up the parent case, 8mm rem mag My thoughts for the 30-8mm was to use a 7mm stw and taper...

i lost the website that gives ya the formula to figure it what size rings i need... so anyhow, if anyone knows off hand what size rings i need i apreciate it, or if somone has a link to the website that shows how to figure it out... schmidt bender 5x25x56mm, with butler creeks, on a MTU or...

My next Supressor for a S&W MP full size 40....suggestions..

I've shot/owned the Nightforce 2FP 3.5-15X50 w/md reticle. I'm considering the NF F1 with the same reticle. I know the the F1's reticle will appear to grow larger and smaller as magnification is changed.....My question is at what magnification would the F1 need to be set at for the reticle to...

I am currently building a 243ai and am ordering dies but don't know which set of neck bushing to buy for the redding neck bushing dies. I will be using 243 lapua brass with either 105 amax or 107 sierra's.

I just bit the bullet and ordered a Nightforce 5.5-22X50 with Zero Stop and the NP-R1 that will go on my new 700P. This should be a nice step up from the Mueller Tac-II I have been using! I finally found this scope in stock at Credmore, last one, but they had NO idea which size Badger rings I...

Someone please confirm the Butler Creek obj cover for the Leupold 4.5-14x50 LR/Mark 4. Thanks

I have used a lathe which had a 14" swing and 36" centers. But can you get to big or to small of a lathe for working on the remington 700 actions? I am looking to buy one and don't know what the best size would be. Thanks

I have never sat down to figure out the proper way to determine group size & I would like to know if someone can tell me what the group size is for this 5 shot group. I have marked on the target documenting the size of 1"... it should be noted that each on of the boxes is equal to an inch.

Im working on my xm3 rifle and need proper ring height using nightforce ultra lite 30mm rings.Specs that i have for the rifle are,#7 contour barrel,20moa nightforce base, and the scope is the Nsx 3.5-15x50.Those who have this or similar set up please advise on which height ring to go...

I have decided that i will try the storm case for my rifle. I dont have the rifle with me as it is still at the smiths getting built. The rifle will have a 26" barrel and it will be wearing an AICS chassis. What model of storm case do i need? Actually i am having two rifles built. both the same...

Hi guys, I'm new to (posting on) the forum, and fairly new to shooting. I did a little bit of shooting with 22s and 410s with my dad when I was little, but never took it up as a hobby until recently. I just picked up an ar15, because I wanted one and I figured the sooner I get one the better...

I searched but didn't find so, What would be the appropriate Butler Creek flip up size for Leupold 4.5-14x40AO? The objective OD on this scope is 2.0" and the eye OD is 1.6". I think #14 eye (1.605") will work for the eye, but I'm not sure about the objective: #31 is listed as 1.998" #33 is...