So I and some ROs were talkin the other day at the range about 40s&w passing into history. When I retired 12 years ago the entire nation of LEOs carried 40s, not so anymore. Anyway one RO mentioned that I could convert my old duty S&W M&P Pro from 40 to 9 by just by dropping in a 9mm barrel with same mags and recoil spring so I ordered a factory 9mm barrel from Numrich. Outside dimensions looked identical.

Had a chance take it to the range today. I was surprised to see POI = POA with the new barrel and it shot a nice group, infact the first 4 rounds went in the same hole at 7yds with my crummy reloads.

The other cool thing was that mags that hold 15 rounds of 40 will now hold 19 of 9mm.

However it would jam every 6 to 8 rounds. Live rounds would fail to feed. Looked like a stovepipe but with a live round not spent.

My first thought was how much higher the top smaller rounds sits in the lips could be the cause of the round popping out of mag too quick. Here's some pics to compare.

First is 9mm, second is 40 in same mag.

What Do you guys think? Should I snag some 9mm mags? Change recoil spring? Or scrap the whole idea?

Granted I don't work in a gun shop and I dont build guns so maybe this is normal. I was watching a video of a guy using a CNC to cut a barrel and when he installed the action to time it, he used a Milwaukee impact wrench to install it. Is this normal? Does anyone actually do this? These wrenches are like 600-1000 Ft lbs, and I assume he would have to use it to uninstall it as well. One would think the hammering effect would transfer from the action wrench to the Lugs? Anyone seen or done anything like this?

Login to view embedded media
Start around 9:10

the middle east yesterday & today, (plus other places) I do not see any of it ending well, at all. I hope those who started & promoted it get caught up in the coming events. However I'm a realist & know they will slither to their dens as always, unscathed.

Consolidating a couple threads with updated prices.

1. Tac-70 338LM Surgeon action, DBM, 2nd owner, minty rifle, 0 rounds from me, and a cast chambering to showing minimal chamber wear - $7900 + shipping



3. GAP-10 Gen 1 308 Upper only! $2000 shipped
- OD Green
- 16.5" fluted Bartlein barrel
- Novekse switchblock
- SiCo Omega QD brake
- Round count: +/- 900




4. ELR Wildcat Project: LRI 7-300 WM with bespoke Copper Creek ammo $2700 OBO (w/o scope)
- LRI blueprinted 700 magnum action
- 26" fluted Krieger barrel
- AIAIX green 2.0 chassis
- Desert sand cerakoted
- FTE muzzle brake
- Round Count: 33
- 367 remaining Copper Creek ammo: 180gr Hybrids@3190fps

Please DM or text 317-seven2seven-six4seven2 with any questions. Thanks for looking!

I dig all these bullshit restrictions getting uplifted. It defies logic and reason how firearms could be banned in post offices, yet you can legally bring in one to ship that you're still clearly in possession of. A little piece of absolute fucking stupidity removed.

Mizelle said that while post offices have existed since the nation's founding, federal law did not bar guns in government buildings until 1964 and post offices until 1972. No historical practice dating back to the 1700s justified the ban, she said.
Mizelle said allowing the federal government to restrict visitors from bringing guns into government facilities as a condition of admittance would allow it to "abridge the right to bear arms by regulating it into practical non-existence."

Click to expand...

what are some of the best budget (maybe $2k and under) non Chinese made 34mm FFP scopes in the 5-25x mag range? ive been out of the loop for many years and looking to scope up a few LR builds that have been in the safe for a while. I have been a huge fan of Japanese made Bushnell Elite tactical scopes years ago. not sure if they are still leaders in this area anymore?

*uses are for plinking/target practice 500-1500yds and non competitive fun
*Deer Hunting 100-800 yds (occasionally more)
*LR pig & Varmint hunting 100-1500 yds

Calibers 6.5CM, 308, 300WM

ive gotten used to FFP now and having the ability to quickly range estimate at any zoom range. no plans to do any competitions or anything.

I traveled to work with a coworker, he just tested positive for covid. He is vaxxed. I am not.

I have been warned to be careful and should I have any symptoms, to inform work immediately and then quarantine.

We traveled in adjoining seats and talked a lot, so I was "exposed".

I am taking zinc and ivermectin and D3.

Let's see what happens.

Day 1: I feel fine.

I don't give a shit about the story you want to tell me,

Yes, you tried buying something a scammer saw you wanted it, he reached out pretending to be the seller wanting payment to fool you into thinking you were paying the seller. He is spoofing the seller.

Yes we fucking know this already ... we have told you this at nauseam and still

Call me I have a story tell, someone tried scammer me... no report, just a story

I dont' give a fuck about your story, all you have to do is protect yourself at all times, pay attention to contacting you, and when the scammer does, cause someone will, you hit the report button.

It requires YOU, YES FUCKING YOU THE GUY READING THIS to do your part and pay attention

The name is modified, a period, a lower case letter, a space, it's modified, the post count is non existent, which is your red flag,

No post count, it's a scammer, period in the name, it's a scammer, if you publicly say, I'll take it, the next message will be a scammer

I am hammering about 20 accounts a day, when you report them, but again, if you don't fucking report them I can't help you and I am not calling you, for any reason. You got scammed, not me, if you paid attention they would be gone, but instead then found a glory where everyone wants a cheap dick. Stop looking for cheap dicks, they don't exist.

pay attention and report the account, even if they say, call my buddy he has it, that is a scammer too

Something a little lighter for a change.

I took both of these drills out of the box new, only about 50 years apart.....good god 50 years.

The Makita was "it". The drill, top of the line and in its day was flat amazing. Nothing came close, there was nothing else when it came out.

I doubt the Milwaukee ever was top of the line, but it is a good drill, and has been used quite a bit. And taken a great deal of abuse.

The Makita died many years ago, and for some reason I hung onto it. Likely because it was so expensive when I bought it. About a year ago I decided to see what was wrong with it, and see if I could fix it. Sure enough, just a wire off the mechanical trigger was the issue, little solder and the drill turned. I ordered some new Amazon batteries and the think works. But man it sucks next to that "new" drill.

I remember having a bunch of batteries for the thing, and changing them all the time, but don't remember this little power. But I think it has not lost much over the years, I think the new tools have just gotten that much better.

So in an effort to lighten up a bit, do you have any old tools that you kept and still use on at least a once and a while basis.

I do still use the Makita, and it makes me smile with every hole, and every screw. If you are really "trying to get something done" it is not the tool to grab, but if you are "goofing around", it does bring something to the table that the new tools just cant.

i was having problem with my rifle and sent it back to the factory . they received it November 21st 2023. I sent emails they finally wrote back
and said they were testing my rifle the week of December 11th . I never hear anything and never received any return emails. Finally called them
and they said they fixed something on the stock but had no idea if it was tested yet. Again sent emails with no response has anyone else had
trouble with them? I 'm ready to ask for a refund and go buy a different brand of rifle . I'm sure the guys in England wouldn't be happy how there customers in the USA are being treated.

Looking for some suggestions for a scope for my new rifle. I’m shooting a 300 win mag. Looking for a scope for hunting and target shooting. I’ve been looking at the 4-20 zoom range with a first focal plane. Illumination would be preferred. I’ve looked at the Vortex Razor HD LHT 4.5-22x50 FFP but have heard some poor rating on the turrets, and also the Burris veracity ph but didn’t like the lack of vertical MOA lines on the optic. $800-$1400 price range, would prefer made or at least have the parts manufactured in the US, Japan, or Europe.

U know the drill
Contact off string pls
Shipped from OR .
Extras available
Test fired only
Minty

Is PRIME Ammo still a thing?

I remember they were, then they were not, then they were agin.

Did a search and found a thread from 2023 where a fellow claims he placed an order and never got it.

I wen to their site and they have 1 choice, a case of 308, that’s it.

So are they defunct or what?

Where does the Mk6 land in today's optics options? How closely does it stack up against the Mk5HD, particularly if the unit is updated to the M5C3 turret similar to the Mk5's?

Selling my NF Army-Spec F1 Mil dot scope with .1MRAD adjustments, 3.5-15x50 FFP. Serial verified by NF, Manufactured in 2009. Made in U.S.A and sent to NSW.

Glass is perfect. Scope shows very little signs of use, extremely fine scope ring marks and a very small mark on bell. Minimal wear to turrets if any at all. Illumination works as it should. I would rate the condition as very good / next to new. No box or paperwork available.

Great opportunity to own a piece of history, only ~200 of these were ever released to the public, even better this one has a recorded history of being an actual contract delivered optic.
Serial # has been covered, will share to serious buyers.
Asking 2300 shipped. SPF to 0646905

Vortex rzr gen 2 4.5x27x56
Great scope only scuffs are on the turret caps was like that when I purchased it
Moving some stuff around to put money elsewhere on new optic

Comes with box, paperwork & sunshade, butler creek caps

1600 shipped
Venmo/paypal/

Complete PRS rimfire setup. Sniper gray Vudoo V22 360 Gen 3 22LR, 22” Bartline 1.20” barrel with a Vudoo 30 MOA rail. Trigger Tech Black Diamond flat trigger. 10 pcs Vudoo V-2210 10 round mags (2 with extensions) & 1 pc 15 round aluminum mag. Vudoo mag holder and bore guide. MPA BA ESR midnight bronze chassis with mag stop. Vortex Razor HD Gen II 4.5-27x 56 EBR-7C MRAD with Spuhr SP-4001 scope mount. Vortex throw lever, Aadmount scope covers and scope chaps. Only used for three matches, just don’t have time for another hobby. Shoots great with Lapua Center-X, Long Range, Super Long Range and SK Long Range Match (I haven’t tried anything else).
Total package $4,750.00

Will consider parting out after barreled action is spoken for, I'm not committing to sell accessories without a buyer for barreled action.
SPF Vudoo V22 360 Gen II barreled action, Trigger Tech Diamond trigger, 30 MOA rail, bore guide and two 10 round mags $1,900.00 + shipping

SPF MPA BA ESR chassis $900.00 + shipping

Vortex Razor HD Gen II, Spuhr SP-4001 mount, Aadmount covers, throw lever and scope chaps $1,900.00 + shipping

SPF 8pcs 10 round Vudoo mags and mag holder $150.00 + shipping

SPF 15 round Vudoo aluminum mag $135.00 + shipping

Some of you remember when I did this Trade-Up program for MagentoSpeeds from V2 -> V3.

Since most of use only need a single well functioning ballistic chronograph I am offering a trade-in for your existing working ballistic Chronograph towards a Garmin Xero C1 Pro Ballistic Chronograph.

First off - your going to be better off selling your Lab Radar or MagnetoSpeed directly to someone person to person. However some people don't care too much about making the most money off their equipment, they just don't see the need to keep around more than one functioning device, and so like the convenience of trading their in on a new unit. So please don't complain that you think I am not giving folks a good deal, if you feel that way, this deal is not for you.

LabRadar Code = xero-lab-trade
MagnetoSpeed Code = xero-mgv3-trade

I am giving trade-in value of $100 for a completely functional LabRadar with the original accessories (and anything else you want to send that you want to include).
I am giving trade-in value of $75 for a completely functional MagnetoSpeed V3 with the original accessories.

To take advantage of this program, purchase the Garmin on my website here: https://www.bisontactical.com/garmin-xero-c1-pro-ballistic-chronograph/

And use the coupon code at checkout for the trade-in value. Then ship me your device. Once we have the device here, and validate it works, we will ship your Garmin.

Some questions you may ask:

Q. Will I pay additional for accessory X?
A. No, feel free to sell it by itself, or include it with what your trading in.

Q. Will I provide a credit for a different Ballistic Chronograph? Ex. MagnetoSpeed Sporter?
A. No, only LabRadar (not lite version), and MagnetoSpeed V3's are a part of the program.

Q. How long will this deal last?
A. 3 more months.

Q. How do I buy the trade-ins your getting?
A. Click on these links to see if we have inventory:
USED MAGNETOSPEED V3 BALLISTIC CHRONOGRAPH
USED LABRADAR BALLISTIC CHRONOGRAPH

I have been reading recently, about all these pesticide resistant, highly invasive asian weeds that are popping up in US states. Typically in midwest states that provide a lot of the grains, soy and cattle that feeds US citizens. My mind immediately went to the paper written by a couple colonels in the PLA, Unrestricted Warfare. Its basically a manual on how to cripple the US without using military weapons.

Its a disturbing thought

Vivek goes scorched earth on the Left in NH Trump rally. This is the new blood Trump needed.

The VP debates will be epic.

It will be the worse beating Cumala recieves since she held back money from her pimp.

Login to view embedded media
Login to view embedded media

6x SWFA MIL w sunshade. little rough but gets the job done. Small paint missing on elevation knob, ring marks $sold shipped found a mark on the glass when looking through. Im sure warranty will replace it if sent in.
12x SWFA MIL w sunshade almost new condition. Paint is good no ring marks. $250 shipped

I have 2 of these Riton X5 Conquer 5-25x50 illuminated 34mm tube MOA mainly been on a safe queen. Will come with Riton by Contessa rings believe they are mediums 12mm. Has a few rub marks on scope. $400 shipped
2nd one(not pictured) 34mm high rings. With sunshade. $450 shipped.

Check, Paypal f&f or venmo.

I have noticed a bunch of people lately claiming that giving members of Congress a raise will stop them from trying to make money through their positions.I know Nit Wit Mitt said it and maybe??Rand Paul too??Its been floated around the networks and net alot lately.

Manners T2A GAP w/mini chassis in Scorched Earth Camo. Fits Rem 700 Short Actions. Includes Area419 rail, action screws, and 2 round holder. About 3lbs15oz as it sits. Light use as shown in pictures. The bolt cutout has been slightly enlarged to accommodate swept bolt handles. Private Message saying “I’ll take it” trumps everything else due to scams recently. $1050 OBO shipped CONUS. I accept PayPal F&F, Venmo, Zelle, or Money Order.

I'm not a rich guy and I settled for the Nightforce SHV 3-10x42 scope for a good general purpose scope. My goal was a scope with no more than 3X on the low end, prefer 10-12X on the top, dialable elevation, illuminated reticle and a reticle with wind holds. I wanted this on a Steyr Scout for literally everything. Snap shots at 10 yards, hunting Central Virginia pastureland out to 250ish and taking long range classes out to 1000. I wanted light weight and tried to keep it under 20 ounces.

No such thing exists. Not even close. Everything is either too heavy, turret can't dial enough (f-you Leupold), no wind holds (f-you again Leupold) or no illumination. I didn't care about FFP because if the top end is 10X, the need for it is radically diminished.

The only thing that met my criteria was the Nighforce NXS 2.5-10X42. Being a cheap bastard, I noticed that the SHV was pretty similar. I spoke to a guy at Nightforce and was told the glass is actually the same between the two. I figured that was a good savings of $600 if the glass is really the same.

It worked. It was okay. I quickly noticed that when shooting longer ranges however, that everything just seemed washed out. Nothing was crisp. It was noticeable at 350 and by 600, it was really bad. I took a class with it and was making hits at 1040 but it was a struggle to see good definition at that range.

Somebody once asked me if the lack of parallax bothered me and I said, "ummm... what?" I didn't get it. I have since figured out that this is a much bigger issue than I had though. I now have a Vortex Strike Eagle 3-18X44 and even when dialed back to 10X, the image is just sharp and clear.

My question is this. Is my problem with the Nightforce the glass or the lack of parallax? I have thought about selling the SHV and getting the NXS but if the glass is the same and the glass is the issue, that will not solve anything. I could also get one of the new Leupold Mark 4 2.5-10X42 which should have better glass but doesn't have parallax adjustment, just like the SHV. Will I be in the same boat with that?

Good Afternoon Everyone,

We hope the holidays were good and the food was even better. We hope everyone is keeping themselves warm across the nation, especially the southerners, bless their hearts. I don’t know which is worse the Alabama loss or a dusting of snow. Florida, we don’t care it’s 70.

Mile High Shooting & Accessories is celebrating 20 years in the business, becoming the pillar of one stop shop for all your shooting needs! Additionally, Thunder Beast Arms Corp. is celebrating their 15 years in the industry designing and manufacturing one of, if not the most, successful suppressors companies in the world.

And because of their success they would love to gift their supporters with a collaboration t-shirt!!! Fortunately for you, both booths are right next to each other in Caesars, Mile High is 73005 and Thunder Beast is 72905! Come by, say hey and get a shirt… it’s so simple even a Marine could figure it out.

Feel free to post if your company are doing any kind of promotionals or meet and greets! So we all can take notes and get schedules hashed out! 5 days doesn’t last (thank goodness)!!

(This thread will be punted once the show is done)

Take Care!
Sparky