I’m pretty new to competition stuff but a long time hunter. I have an NRL22x and an NRL Hunter match under my belt, and I’ve RO’d a gas gun match. I built a 6GT that I want to start doing some single day matches with and I need to glass it. I’m in the Burris XTR III price range on it, and I’m wondering if the illumination is worth it? I’d be fine with the regular SCR-MIL and think I may prefer it as I dial elevation 100% of the time. This rifle will be 100% competition only - so is there a point in illumination?

In excellent condition. C stamped receiver, dot matrix C on carrier, MPC marked bolt.

$400 shipped. Zelle or Venmo F&F no note accepted only.

No trade.

*UPDATE* With help from members here and upon further inspection these don't seem to be splits but just folds from processing. I admit after firing some of them sure looked like being split but I cannot see any light through them.

Hey guys I just wanted to give out a little warning here for those of you that picked up some recent production Lapua 6BR brass. I was able to pick up 500 peices of much needed from the last run few weeks ago. Today I went out and fired 25 and after cleaning and close inspection noticed that there were case splits happening on 20 of the 25 pieces. After close inspection of chamber and scratching me head I started to inspect some virgin brass from that lot. There are distinct lines at the neck/shoulder junction. The first picture is once fired the second picture is virgin brass.

Im not here to bash Lapua and I have emailed them about the issue. I just wanted to put the info out there just incase some others have gotten some of this and I would recommend that you inspect carefully.

Selling a used Giraud case trimmer with 5 case holders. 6xc, 6bra, 6 creedmoor, 6.5 creedmoor, 308 win, and one case cutter. Bought it used from another member here. Going a different route. I trimmer 2 cases on it. Dont know the round count previous. It was claimed at 300+ rounds trimmed on the unit. But it might be more cant say.

Asking 700 shipped in lower 48. Venmo, Zelle, USPS MO, PP FF, PP regular with fee payment.



EDIT: Sold unit with 6.5 creedmoor holder.

Holders 308, 6 bra, 6 xc, and 6 creedmoor are now available. $30 shipped each.

Benelli m4 m1014. Has been used and sat in a safe (less than 100 rounds)so it shows some blemishes on reciever that have been re blacked and aren't very noticeable unless you get close.

Telescoping Stock, 7 round tube, Taran tactical elevator, TT follower, TT safety, TT bolt handle, scalarworks rmr mount, midwest industries mlok rail, and flared loading port. Surefire and holosun 407c x2 green not included (But can be for additional funds).

TRADED

$2800

Accuracy International Elite Sand ATX 6.5 Creed

Gen 3 with tooless adjust

200 rounds on barrel

Why is this so cheap you ask?

Because I took the 7 axis (dremel tool) to the bolt to smooth out the function of it. I went to far then had to weld and re-profile the cocking ramp that the fire pin rides against.

It functions perfectly and was shot in a match yesterday though it doesn't look perfect anymore.

$3800 to your FFL

Everything has to start somewhere and for us, it’s with the Zeroing process

We talk a lot about the Shot Process, question, what is your Shot Process ?

Beyond my precision rifle classes, I am lucky enough to sit on others, the Riflekraft, CR2, etc, I‘m endless observer and like to solve problems when needed, identify an issue and I want to fix it.

Zeroes, zeroes have me on edge. I mean it’s easy enough, but is it. Problems in our shooting can start and stop with a bad zero or misunderstood one. Misunderstood is the right word too, We often see people the scope is set to 4.2 and you ask them, What is that, and they reply, my zero… why is it there, well I figured, A, B, C, which none of them are relevant. Why is the zero so misunderstood ?

How can I address it, cause i want to address it. It‘s a process not an event so it needs to follow the correct format for the process.

Chris had a shooter out last week and several times it was, “If you refine your zero that will fix that”. Okay let’s talk refinement here, i want to hear from you guys so I can clean this up

What are some of the techniques you use to zero ?

How would you refine your zero ?

Do you have a zero shift from position and do you consider putting that into your zero ?

I have a plan to solve this but i need more input, what confuses people, what is a first hand, no shit it happened me, are you fucking kidding me zero story ?

I want to solve this with a process, A, B, C, for max efficiency

Planning a P Dog hunt in a few months and I think a tripod will be the best way to shoot from. I will never use one in competition so I don't want to spend a fortune. What would be a decent model heavy enough for my 12lb 6Creed?

For those following what is going on in Ukraine/Donbas Larry Johnson talks about this Substack in his latest blog. It seems quite good.

"Note, the specific confirmation of something we predicted here in one of the recent reports, which is that the offensive is likely to kick off, not all at once but in several stages in order to maximize confusion, allow a little lead time for AFU to frantically send reserves to one direction to caulk the flow, only for a completely different direction to massively kick off into un-reinforced territory."



Login to view embedded media
Login to view embedded media
FJB

I wonder if Kim Dung Pile has any idea what would happen if he managed to get on to Hawaii or Alaska?

These fucktards in charge, on all sides, are playing a dangerous game that could end our world.

We need either the Big Meteor of the Big Jesus.

Imagine what a huge meteor strike would b like, you'd watch it coming for days while the gob'mints scrambled to blow it up. Chaos would ensue since people have nothing to lose. How would it be different if you were on the opposite side of the planet as opposed to right under it.

Happy Sunday, LOL.

North Korea makes fresh threats after ICBM test - CTV News​

https://www.ctvnews.ca › world › north-korea-makes-fres...


12 hours ago — The United States responded by flying long-range supersonic bombers in a show of force later Sunday for separate joint exercises with South ...

You know exactly why the woman was shot in the back.

Never, ever, turn your back on them.

And just leaving it here before the MSM cleanup begins

Sealed, unopened 250ct box
$190 shipped

Alright first real bolt action. I havent done research on glass since 2005? So much has changed and Im realizing how green I really am.

Ive narrowed it down to these 3, all vortex in a price range that wont kill me.

Will be on a seekins havak ph2 in 6.5 creedmoor. Thinking strongly of cutting the barrel down to 18" (been a machinist for 10 years)

Range not more then 600-700 yards. Mostly just target shooting and steel, would like it to be able to hunt.




Mods if its not ok to post links please let me know and Ill edit, this was just faster.

Appreciate the help fellas.

The GAP website (and a post from a little while ago by George I think) says that their 2023 rifles will be built on Impact actions (Not Defiance?).

I am a horndog for the GAP Crusader, Hospitaller and Gladius. Used to own a Crusader. Also own two custom Impact builds! I am wanting to see some of their rifles with the Impact action. Sounds like a killer combo that I may need to get my hands on.

1/2x28 ASR $50 .223
1/2x28 AAC single chamber brake $30 .223
5/8x24 APA little bastard, has some marks where some retard tried to remove with what I assume was a flat head screw driver. $75

I have an I’ll take it via PM for the vortex, I’ll update when payment arrives or the scopes are back on the market.

Sold: I have one more extra scope to sell and I can’t decide which one. First one to sell will close down the thread. Both scopes are brand new in box. The S&B I’ve owned for a little while but never mounted or used. Pictures for the S&B will be available tomorrow. Price is $2225 for the vortex and $2450 for the S&B shipped to the lower 48 and paid via PayPal F&F or USPS money order. Sold:

Traded, thanks all!

Brand new factory unfired Nucleus G2 in 6.5CM.

The details of the build is as follows:
- Nucleus G2 w/mausingfield style bolt, 20MOA rail
- Criterion 6.5CM 25" 1:7.5 twist
- Woox Exactus w/arca rail (light use)
- Mesa Arms M5 DBM (light use)
- APA LB brake 6.5mm (light use)
- Triggertech flat blade trigger (new)
- Vortex Venom 5-25x56mm FFP w/ EBR-7C (MRAD) (new)
- MDT 34mm med rings (new)
- ARC 10rd mag w/LRI follower (used)

Asking $2750 shipped, deduct $525 w/o scope/rings

I’m currently pricing out parts for my one and only,one and done AR. I’d like my AR to have BUIS. Would it make sense to have a QD scope mount with buis directly over bore or a non QD scope mount with offset irons?



Based on this info I’ll start researching Buis and a scope mount. It’s going to be a lpvo with a red dot on the forward scope ring. Any info or suggestions is appreciated.

I've been overseas for a few years so I'm out of the current knowledge game on the state of the industry. The last time I was neck deep in this stuff, I bought an AAC SDN-6 (remember those?) and a boat load of 51T breaks and flash hiders for all the rifles. It works fine on the short carbines and SBR, but on my Howa 1500 6.5CM I have a lot of slop in the lock up. I'm thinking I should get a precision direct thread suppressor for it. Probably get a .30 just so I can build an AR10 someday and use it on that.

My research is showing the TBAC Ultra 9 is highly recommended. Then I don't know if I want to wade into a whole other family of muzzle brakes, or go direct thread, or use a different model?

I just want to lower the noise and blast at the range on a bench.

Also- follow up question- I have 6 months left on being stationed overseas. Can I buy my suppressor online and have it shipped to my parents if it gets out of "jail" before I get there? (we're all on the same trust).

Yowza.


10 minute summary

Login to view embedded media

I have a SP10. I not sure what can be done to make it better. I am very satisfied with it.

What is the cost of SP10M. All I see different is the adjustable gas block. Can some one point to difference

Hi,

I’m looking for scooe for CZ457 .22 LR I choose few sights but I don’t know which one buy. I’d like to get it with best glass
I’d like to have 34mm tube.

My options:
Arken SH4 gen 2 6-24,
Arken EP5 5-25,
Athlon Midas Tac 5-25,
Athlon Ares BTR 4,5-30,
Vortex Strike Eagle 5-25,
Vortex Venom 5-25,
Vortex PST2 5-25 (used).
Other?

What do you think?