Looking for any info on this scope.
What I’m being told.
PM II 5-25x56 FFP
DT MTC 0.1 MRAD P4FL CCW illuminated.

Trying to figure out how old it is and what may be the value of it.
I've never seen a PM II with an elevation turret like that.

I have a Remage barrel I was just putting on. When I screwed the action almost to the recoil lug I could feel the play up and down in the tenon threads. This action has not been trued, and has burnt out several barrels, as well as having a rotation of three other barrels I switch back and forth on it currently. None of them do this. I just measured the major diameter of the tendon thread and I am getting 1.059-1.060. I don't have ring gauges or micrometer , but when I put my caliper in the groves looking for the minor diameter I get 1.004. I measured both with two different calipers. This is unsafe and I should be returned correct?

The muzzle threads are so big my QD attachment also has to be turned on with wrench from about half way. Again none of my other barrels are like this. This barrel is a replacement for a barrel that the muzzle thread cut way undersized for a 5/8/24. With the muzzle device almost at the shoulder you could wiggle it up and down on the threads.

I don't mean by grabbing the end away from the threads. I mean if you grab it by the shoulder over the threads, you can fell it move up and down. For both.

For sale is my Remington Defense long action RACS. This chassis started life as a left handed model, and was machined by a professional to fit RH actions. For anyone familiar with this process, it isn't easy.
Included in this sale is:

• Chassis & one accessory rail
• Tan Cerakoted XM2010 marked LH center section.
• 2 Racs specific 5rd magazines.

Someone previous to me decided to get an allen key stuck in one of the set screws, this doesn't hinder performance or function in any way

Price is $3650 Shipped in the lower 48
Paypal F&F, Venmo, or Zelle
I am new-ish to The Hide, but have great feedback on Tacswap and other sites.

NO TRADES, please send me a PM if interested

• 
  
  

Looking for some inspiration. I've got a AR308 build in progress and I've decided to go full white trash FDE on this one. Lately I've been intrigued multiple shades of FDE on a build.

Let's see what you've got. Here's a couple I found.

Noveske Project Ares rifle - $2800 shipped Sold

More Pics

I am parting with a very rare Noveske Project Ares — the only Noveske factory rifle to use a Knights Armament rail and one of last rifles released while John was still alive. I emailed Noveske about some original build info since it's missing the original signed/dated certificate these came with, and learned this rifle was completed by them on 12/12/2011 and the barrel serial # matches their records for the original build.

Original rifle specs:

14.5” 1:7” mid-length gas stainless barrel w/ Mod 0 5.56 match chamber

AAC 51t blackout pinned to 16” non-NFA length

Gas block is pinned & barrel has black KG gunkote finish

KAC URX2 rifle length rail w/ integral front sight

KAC micro 600m rear sight

Noveske-marked Vltor upper

Noveske forged Gen 2 lower

Geissele SSA-E trigger

Noveske qd endplate

This is a gen 1 Project Ares rifle which uses a forged gen 2 lower receiver. The rifle has ~400 rounds through it per the original owner and is original except for the following parts — charging handle changed from Noveske/Vltor raptor to PRI gasbuster, stock changed from B5 Sopmod to Magpul STR and grip changed from Magpul MIAD to Tangodown BG-16. I have fired exactly one magazine through the rifle since I bought it and am the one who swapped out the parts, except for the stock. The rifle is in great condition, mostly showing just normal light wear from use and safe storage. The only notable cosmetic flaw worth mentioning, not from normal use, is where the previous owner tightened down some unnecessary screws in the sides of the KAC rail, leaving marks in the finish of the counterbores for screw heads in the rail (pictured).

Make sure your FFL will accept a shipment from an individual, otherwise you will need to cover the cost to have it shipped from an FFL on my end.

USPS money orders preferred, but I can also do discreet PayPal friends & family. The rifle will be sent via shipmygun.com w/ full value insurance.

Thinking about getting one for various garden items and other foodstuffs. Wondering if anyone here has experience with them.

NF ATACR 5-25 F1 Mil-C. Sun shade, caps, tool and windage ring in the box. I can’t seem to find the manual. 2350 for the ride pay pal, friends and family or add 3%for goods and services. I would trade for an ATACR 4-20 Mil-XT or possible a ATACR 4-16 Mil-XT as I’m looking for something a little shorter and lighter for a 223 gas gun.

I was told to use red hi temp locktite for my tbas brake to keep rhe brake from coming off with the ultra 7. That worked but I took the brake off, which took a bunch of force. The threads on muzzle and inside the brake galled up a little bit.

Should I have heated it up first with small torch or is red hi heat locktite the wrong product

$1550 Shipped
Glass is clean in both of them.


NXS
8-32x56
NP-R1 RETICLE
ILLUMINATED

Brand new Foundation Centurion Dark Distressed inlet for Impact 737 short action.
$1250 for the stock only, +$110 for the arca rail, +$180 for the Hawkins M5 bottom metal.
Ships to lower 48 for free, No CC fees, 2.5% discount for e-check payment. PM me for more info.

My old Crosman is worn out & can't cut the mustard anymore.
So I'm forced to enter the moderately priced (<$1000) air gun market to take care of some small vermin around the house.

1. Can a guy leave a PCP style air rifle like a Benjamin Marauder pressurized for a couple days to take care of a quick target of opportunity ?

2. Would the .22 cal pellet give a guy the best combination of accuracy, velocity, energy, availability/selection and cost ?

I have a budget limit of about $600-700 and pretty much have narrowed the search down to:

Benjamin Marauder_ - First choice
Seneca Sumatra 2500 - Second choice
or
Beeman R9
Air Venturi Avenger
HatsanBullboss QE

Am I way off in my thinking on this, I know More $$$ can buy better, but this just a pellet gun....LOL
Amazon or Walmart seems to have decent prices but I hear Wallyworld has a no return policy ?
Might just stick with PyramydAir or Airgundepot

Would anyone have an issue buying a used gun, ie seals, mechanism, action/barrel wear etc ?

Thanks

Sorry bitch, youre going to jail.

Woman who told police she was too good-looking to ... - The Hill​

https://thehill.com › homenews › 3707650-woman-who...



1 day ago — Hend Bustami allegedly killed her 62-year-old mother Wednesday morning, Las Vegas Metro police said. Officers began looking for the daughter ...

Autotrickler v3 with Area 419 Upgrades
-Powder Cup
-Plexi Lid
-Improved Base
-Self Centering Tray
-Housing and Straw
Great condition!

$600 + Shipping

Can send pics tomorrow

Text oressage with questions

757652129SIX

Been a long time coming on such strange case. Hope it's one step closer to the end for the families.

I don't get prints or models on this stuff. I get handed an artifact part and the party starts from there. Late yesterday afternoon the tree started to bear fruit.

M249 SAW feed cover trays in process. Bar stock 7075 AL.



Op1_Stock prep. Ripping a pair of dovetails into a 6lb block of material.



Op2 in the puter. I ended up flipping the part 180* as it offered better access to certain features.







35 minutes later: 6lbs whittled down to 8oz and change.

Accuracy International AXMC in Black
Excellent condition
Approximately 575 rounds on action
Barrels priced separately

Price includes:
Lapua Mag Bolt assembly with LFP
1 - 10rd Lapua magazine
RRS ARCA rail
Standard AI AX Grip (not GTAC installed), 1 tan dark earth keyslot pic rail, and standard rear bag rider in dark earth

Does not include bugholes bag rider and it is not for sale

$SOLD *****
shipped and insured (via PP f&f with no comments or Zelle)
PM all offers

Following is Available with the Rifle First
All will be listed after rifle sells

$SOLD
GTAC Grip Conversion with Zero angle Ergo Grip
I painted this black, it was Dark Earth originally

Barrels (only one is available)
$750
300 Norma in Black 40 rds fired
Or
300 Norma in Elite Sand 78 Rds fired (Will be in my possession late next week)

$SOLD
Complete 308 Bolt Assembly with SFP

$SOLD
SA Magazine adapter

$200 Shipped
3 10rd Double Stack SA Mags

Looking at possibly getting a 2008 thru 2012 BMW 328i xDrive. There are a few of these for sale in my area and I'm looking to get a car for my wife.
She is a low mileage driver. Her main concerns are heated seat and 4-wheel drive. I am somewhat of a car guy, so I would like to get her something other than an econobox. I have never owned a German automobile.

The cars that I am seeing in my price range, ($10-$14K.) seem to have around 100k. miles.
Anyone have firsthand experience with this model?
Is 100k. miles that big of a deal if the car was taken care of?
Useful opinions welcomed. I have never bought a used car with 100k. miles already on it, that's a bit of a sticking point for me.

Try being swallowed whole by a 7 mtr. python.

Missing Woman Found Inside Python After Being Swallowed ...​

https://www.insider.com › News › International



2 days ago — The body of a 54-year-old missing woman was found inside a 22-foot python after it swallowed her whole · A 54-year-old missing woman in Indonesia ...

Login to view embedded media

Fetterman's Wife Calls Swimming in America 'Very Racist'​

https://flipboard.com › topic › watersports › nationalreview



12 hours ago — National Review - Speaking on a podcast Thursday, Gisele Barreto Fetterman, the wife of Pennsylvania Democratic Senate candidate John Fetterman, said, ...

Guys I cannot tell you how many now this year but just had another customer send in barrels that are not ours. In the attached pic....the customer bought components (along with actions) and think the shop he bought them from did all the gunsmithing work. Shop recommended our blanks and customer went with it. Guns don't shoot. So customer calls us up and sends the barrels in for inspection.

The 30cal barrel is a button rifled barrel. Has 5 grooves but not 5R rifling.

The 7mm barrel is a 6 groove. We don't do 6 groove rifling on 7mm's. 4 groove or 5R only.

If you are buying guns sight unseen and or components and getting the machined work done before you receive the components. Especially if you are dealing with a shop you've never dealt with before......ask for the s/n of the barrel. It's stamped on the breech face of the barrel and gets lost when the threading and chamber work gets done. If you know the s/n you can always call us and confirm if it's ours or not. Also if you buy the barrel from us the s/n will be on your invoice as well. Record the s/n for your records.

Also most barrel makers don't s/n they're barrels. If the shop says there is no s/n tread lightly.

I bum for the customer because he is out money and has guns that don't shoot and we've got to be the bad guy to break the news to the customer when this happens.

I've even received complete guns in this year where the customer complained they wouldn't shoot etc...and upon inspecting the gun and trying to figure out what is going on we find out not our stick on the gun.

One shop and I won't mention names sent me not one...not two but six 30cal barrels all chambered in 300wm and the complaint was they don't shoot and need the barrels replaced. So when the barrels got here and I looked at them.....and I called the guy up and told him I'm not replacing them! He asked why? I said for starters they are button rifled. Second... I said they are all 6 groove 30cal barrels. We don't make 6 groove 30cal barrels. I looked up his past orders and they only ever bought 4 grooves from us and not a lot of them. Not a steady customer. So either they kept the barrels for themselves and bought cheaper 30cal 6 groove barrels from another shop and tried to pass them off as ours and tried to get them replaced.

Later, Frank
Bartlein Barrels

A shme Nancy wasnt there to take the brunt.

Speaker Nancy Pelosi's husband assaulted in break-in ... - KKTV​

https://www.kktv.com › 2022/10/28 › nancy-pelosis-husb...



39 minutes ago — House Speaker Nancy Pelosi's husband, Paul, was “violently assaulted” by an assailant who broke into their San Francisco home early Friday, ...

So admititedly, I can be somewhat of a grammar nazi at times, but not so much when it comes to pronunciation, but I just watched a video, and the way the guy pronounced Lapua sounded weird to me. He pronounced it Lap-Wah. I've only ever heard La-poo-uh.
It's like when I had my shop back in the day, and everyone said Lee-Uh-Pold. I wouldn't correct anyone, but I would pronounce it Loo-Pold, and that's pretty much how I hear it today
What's the consensus here?

Remington 700 Short Action .223 bolt face with LRI side bolt release, LRI spiral bolt fluting, 20 moa scope rail
Bartlein 1:7 twist 26” Barrel chambered in .223 Remington by Summit Precision
Area 419 Hellfire Brake (3port)
Bix and Andy Tac Sport Pro trigger
Foundation Centurion Stock ( Coyote ) with foundation installed Arca rail
Hawkins DBM5 Bottom Metal
Leupold Mark 5 HD 5-25 x 56 with PR2 Reticle
Hawkins Heavy Tactical rings
2 magazines
Area 419 bolt knob
Wiebad Cheek Pad
Short Action Precision 2 round holder
This is a PRS tactical class dream it shoots sub ½ moa all day with FGGM 77 gr smk.
Bipod not included

This rifle started as a remington 700 police .223, turned it into a replica of my comp rifles approximately 400 rounds on action, 225 on barrel and scope
Over $5500.00 invested

$3600.00 Shipped to FFL of choice CONUS

Paypal F&F or zelle, or if local cash

His purchase of Twitter complete and heads are rolling. Just listen to the liberals whine and squeal, since they cannot censor conservatives any longer. If only he could purchase the federal government! Sadly, that's already been done.

I'm hearing from all over that there is only *about* 3 weeks worth of diesel fuel out there right now, and that it's not going to change soon.
I could drop about 19 youtube video links, Fox, Cnn, BBC, etc, but why ?
I'm assuming y'all have heard about this already.....haven't you ?
So....any tips other than making sure your tank is full ?