moa

I am just asking to see if there are any of my Neighbors here that have seen or used this product: http://egw-guns.com/store/index.php?main_page=product_info&cPath=53&products_id=272 I would like to get some feedback before I purchase this item. I have contacted GG&G about their GS-1 being...

Hey I have a Ruger 10/22 with a Tac/solution barrel and Tac/solution base and installed a Tasco 6-24 Varmint Mildot and can only sight it in at 25 yds as I run out of elevation. Any one have any info on where I can get a 30 or 40 MOA Base for it? All I can find is a throw lever one for 165.00...

I'm looking to top an AR10 with an S&B scope and am looking for a one-piece mount with 34mm rings and 20 MOA built in. Does such a thing exist? I've search this site and scoured all over the internet (including on the one-piece mount page) but to no avail. Any tips for where I can source this?

I am new to the hide, and after a lot of reading decided to give Glen a call. Man am I glad I did. Thanks Glen

Picked up a AICS for my rem 308 Saturday and ran into a little problem. I have a 2 piece mark 4 for a base and leupold mark 4 6x20x50 optic. The eyepiece is just to low. I moved the cheekrest laterally and all the way down. I am assuming I need more moa on base or????

OK, I have a Rem 700 SPS (26") in an HSP stock. I'm using a Burris Signature Select 6-24X44. When I was using the regular two piece Warne bases I had plenty of adjustment to go out to 600 yards. With the Warne rail mount (0 moa) I don't even have enough elevation to get a 168gr SMK at 2700fps...

i was wondering how you can fgure out the range of somethng in MOA i can do it in mills thank you

I have a new 700 sps-v .308 first trip to the range was a lil discouraging. I changed out the pos plastic stock with a hogue over mould off a sps tac (not the best stock but I don't have copious amounts of money). egw 20moa base, burris xtr rings. a tru glo 6-24x scope(again not that great but...

Greetings everyone, new member here. I'm not very internet savy, however I came across this website and see a wealth of knowledge exists here. I have a simple question: how is it determined that 3.5 moa exist between every mil in an M3A Leupold Scope? Every training environment and FM I have...

What's the verdict on these?

I have a Rem 541T and I am trying to find a 20 MOA base to go on this rifle. I currnently have a Leupold 1 piece base on it now with 1 inch rings and looking to maybe changing to a scope with a 30mm tube. Any help would be greatly appreciated

What is the difference in practical terms ? Will MOA measurements be phased out and MRAD take its place ? Does it make that much difference when out in the field ?

At what range shooting does one need to use a 20 MOA base. Can a 0 MOA base be used say out to maybe 500 yards for a .308?

I am putting together an AR15 (specs in a previous post), but it may be that my GG&G GS-1 cantilevered rail may hit the scope bell. I can't really find a rail with a shorter cantilevered section that I like, except some that are 20 MOA. But wouldn't these be of little use for shooting an...

just wondering if a Schmidt and Bender can be changed from Moa to MIL ?? Thanks Bill

My EGW 20 MOA Base came today for my Savage Mark II FVT and I got it mounted. (I was going to shoot my Lakefield but decided to mow the Range this morning instead. It needed it). When I got home from the Range mowing venture I mounted the base. I used the furthest back and farthest front...

Is it easier to range with a MOA reticle than a Mil reticle? If one MOA is 1 inch at 100 (I know it isn't exact) does it make it easier to range because it the reticle measures X MOA for target size when you do the conversion you are already using inches and yards at that point. I hope this...

If a scopes adjustment is .5 MOA per 100 meters how do you compute that if all your shooting is done in yards? Did it just add another step to all your calculations?

Please don't laugh guy's went shooting with my nightforce I always tough that .25 moa meant 1/4 inche made myself a target with 5 different aiming point so I could check if the ballistic chart from JBM to 500 hundred yards was OK, well nothing worked... could you explain to me exactly what is a...

I recently purchased a 300 WSM custom rifle built by Ryan Kelsey at Christensen Arms. I loaded up some hand loads and at 100 yards I shot 4 shots and I got a .182 group ( center to center.). Now if my math is correct, this is a sub 1/4" moa gun or ??? I actually think I can improve on this group...