ring

  1. P

    Rifle Scopes Steyr SSG 30mm Ring Height

    A question for SSG owners, I decided to mount a Falcon Menance 7.5-50 on my SSG PIIK. My 30mm rings appear to be high. Will I have enough clearance for the 50mm obj.Post pics if you can. Thanks to all.
  2. P

    Rifle Scopes Ring height effect?

    I got my Leupold back after getting the erector repaired. I mounted it on a 20moa base on my Anschutz .22. I used some Leupold QRW rings I had. The rings are medium height. The height of the base plus medium rings puts the scope higher than I like. I will get some low rings soon. I have always...
  3. XLIV

    Rifle Scopes dumb SSG69 scope ring question

    sorry for the dumb question.. Do the QR mounting screws go on the port side or starboard side? I've been looking on line and see them on both sides..or does it even matter? tks 44
  4. W

    Rifle Scopes Ruger 30mm ring height

    Hey guys, I am trying to mount a scope on my boss' Ruger 300 win mag. He's got a 30mm maintube with a 50mm objective lens.I was wondering if anyone could steer me in the right direction as to what ring to use as well as what height would get it done.Thanks Wombat
  5. Highground

    Rifle Scopes Leupold Gold Ring HD or Steiner Predator C5?

    Which do you recommend? They seem to run about the same price.
  6. M

    How to figure the right ring height??

    This is a generic question - I'm trying to figure out what ring height to use for a rifle build, and since I am going to be building a few different ones, I thought I'd address the issue generically first (and then ask stupid follow-up questions). What are the factors to consider and how do you...
  7. Kevmo8

    Rifle Scopes Ring Size?

    I was wondering if anyone could tell my what size rings (LOW, MED, or HIGH) that I would need for my setup. I have a Remington model 700 SPS Varmint. I am purchasing the Millett TRS-1 4-16x50 (30mm) rifle scope. I was also thinking of going with the Millet short action Picatinny Rails. Could...
  8. rc2125

    Rifle Scopes Mk4 ring height for FN SPR, leup 4.5-14x50

    rifle: FN SPR 20" mount/base: factory 1 piece (near mfg) scope: Leupold Mk4 4.5-14x50 Anyone know if Leupold Mk4 medium steel rings will provide enough clearance (with butler creek caps) between barrel and objective? Didn't find any definitive info doing a hide google search. Nothing on the...
  9. S

    Rifle Scopes Base and ring for Savage 12 LRPV

    I'm looking for a base (0moa or 15moa) and rings for my brand new Savage 12 LRPV. I'm going to install a Zeiss conquest 4.5-14X50 on it. I looked at TPS and Ken Farrell (will probably go with TPS for the moment), but I'm having a hard time finding out wich base fits it (one piece)... I'm also...
  10. knockemdown

    Rifle Scopes Heritage Objective clearance. Ring height ???

    Gents, As I understand it, Premier's own front fip caps require some additional height clearance. For those lucky enough to have a Heritage mounted up, I'm curious to know what rings work with your specific base and barrel contour... My app. is for a Rem700SA, Seekins 20 MOA base, Rem Varmint...
  11. 96C

    Rifle Scopes McCann MIRS rail with Leupy 50mm, Ring Height?

    Hi guys, I have the McCann MIRS rail for the Rem700 action SA and a Leupold 4.5-14x50mm with the ARD + flip up cover. The issue I have however is my Leupold MK4 Medium rings were too low, they have a High and Super High MK4 ring set. Does anyone have any experience with the MIRS and know their...
  12. E

    Rifle Scopes Warne scope ring torque wrench

    I just got it from Brownells for under $30. It is a T-handle unit with a clutch that slips at 25 inlbs. It only fits Torx T15 screws. I was putting a scope on a LTR and gave it a try. If this is what 25 inlbs feels like-I have been over doing it for years.
  13. J

    Rifle Scopes Ring Height for AICS

    Okay so this has probably been covered before but I don't have the time to find it because I am going to order it soon. What ring height do each of you people with the AICS 1.5 or 2.0 have for a scope lense objective of 50mm? I am going to build an AICS 1.5 and a Remington 700 varmint and...
  14. ArmedByRuger

    scope ring spacer

    Hi, Is it a bad idea to add a thin spacer to a rear scope ring so that it has a slight downward angle maximizing the up elevation travel for long range shots. I have heard about this being done on the Army's new M110 SPR's...
  15. T

    Rifle Scopes Torque for ring mounts?

    What is the recommended torque spec for ring mounts for scopes? Thanks
  16. ashland

    Rifle Scopes Ring mounting question

    When mounting the rings, which side of the rifle do the locking nuts belong. Or does it matter? Using Badger base and rings.
  17. usmc7980

    Rifle Scopes Seekins Ring Height?

    I have an SPS tactical 308 and am getting a Zeiss 3-12x56 for it. I'm using an IOR 1 piece base and want to use Seekins rings. I want to mount the scope as low as I can, so what height will I need?
  18. Ts1

    Rifle Scopes AI Ring Question

    Will the AI reducing ring set (part#4323) 34mm to 26mm accomodate the 1 inch tube of the MST-100?
  19. N

    Rifle Scopes Delrin scope ring reducers

    Anyone used the 30mm to 1" scope ring reducers? Any problems with the scope slipping?
  20. Clark

    Rifle Scopes Confusion about ring heigth

    In this picture, two different rings are decribed as 30MM High Ruger Style W/1” Insert AI11059 30MM High Ruger Style W/1” Insert AI11061 They can't both be "high" http://barska.com/accessories.html By clicking on the "buy now" button, we can see that AI11061 has another alias, "X-high". That...