Tl3 with a proof 20 inch carbon 6.5 creedmoor barrel. Muzzle is threaded 5/8 24. Barrel has right around 250 rounds down it. Asking 1850.00

I remember my moment.

I was heading into our local retail store to purchase some supplies.
In front of me was this cute 30 ish young lady.
She paused for a moment then held the door open for ME

Ouch.

Guy goes has contractors go onto his neighbors property and cut down 32 mature trees so he can have a better view of NYShitty. He thought he'd only pay a minimal fine but looks like its going to bite him in the ass to the tune of a couple million. What fucking arrogance..

Man fined for cutting down 32 of neighbor's trees in New ...​

USA Today
https://www.usatoday.com › nation › 2023/06/28 › m...



Jun 28, 2023 — Grant Haber, the Denise Drive property owner who allegedly ordered the work done, could face penalties of up to $1,000 per tree, Linson said.

I knew there were already so many threads about suppressor recommendations here and a lot of other forums but I still want some recommendations from the hide about getting my first suppressor.
1. I see a lot of people are big fans of TBAC but I wonder if they are still the best in today's market. I read reviews from Pew Science/various bro science/TBAC Summit 2023 and saw that its sound suppression level is outperformed by some newer designs such as Otter Creek, Diligent Defense, and Abel. I wonder if their accuracy level is also outperformed by those newer designs? or perhaps it is different guns like different suppressors kind of thing?

2. If TBAC is the ultimate answer, should I go with the U7 or the Dominus? I see the trend today being everyone making fatter suppressors and I see the result in the TBAC summit showing that the Dominus is much quieter than the U7. But what about the accuracy level of these two suppressors? And also do people run into the problem that they see the fatter Dominus in their scope?

I plan to only shoot bolt guns with the suppressor and I plan to use it for both benchrest and hunting. Thanks for any input!

The following items are for sale including shipping. Buyer pays insurance.

Smith & Wesson Competitor 9mm, SOLD

MagnetoSpeed V3 Chronograph $190

Ruger GP100 6” 327 Federal Magnum SOLD

Cheytec ar-15, Swamp Fox 1-10x lpvo mounted in a Swamp Fox mount, Crimson Trace flashlight and pressure pad, muzzle break with a qd Strike Industries gas diverter/flash suppressor mounted on top. Anti-walk pins, and Magpul forward grip. The rifle is fde cerakoted from factory, rattle can as a top coat. $1850.

Stag 3 gun elite, with Samp Fox 1-10x lpvo mounted in a qd Bobro mount,EC tuner muzzle break, Magpul forward grip. $1850

Springfield Prodigy with dot, 2x20 round mags, 1x 17 round, and 1x 26 round, $1300.

Holosun HE509T x2 series SOLD

For Sale:

Tripod #1:
- 2 Vets QDT
- New never used (no box)
- SOLD

Tripod #2:
- Vortex Radian Used to RO 2 matches
- comes with ball head
- no box
- $650 shipped obo

text for pics 330.207.5847

No trades at this time.

I have an excellent Manners PRS-TCS in Elite High Plains Gloss with Sykes Clutch rail and clutch. The stock also includes (2) steel buttstock weights and spacers, 360 Precision steel arca rail, Factory Area 419 arca rail w/ all brass weights installed and a Wiebad Mini-Stock pad. Comes with the Manners Mini-Chassis and fits Remington 700 SA and clones. I will ship it tyd for $1675, payment through PayPal friends and family or Venmo.

Cleaned the tip with a small jewelers drill bit and the results. 223 w/77 gr SMK at 2780 fps, tagged out with a 234 yard shot & 20 yard recovery. jacket was in the offside hide.

removed going to auction

After investing billions to adhere to President Joe Biden’s green energy agenda, General Motors (GM) is backtracking on all fronts when it comes to Electric Vehicles (EVs).


As GM was the last of the Big Three to strike a tentative agreement with the United Auto Workers (UAW), the automaker’s green energy dreams — championed by the Biden administration — have come crumbling down.


GM CEO Mary Barra, a close ally of Biden’s, has said the automaker will not begin to attempt to produce 400,000 EVs from 2022 through mid-2024 as initially planned. GM is also delaying retooling its plant in Orion Township, Michigan, to build EV pickup trucks.


Days ago, GM had to begin offering owners of its Chevy Bolt about $1,400 to install a diagnostic program to determine if the vehicle’s EV battery is defective. The move came after GM had to recall all of its Chevy Bolts due to the EV battery issues and a class action settlement over the battery problems is anticipated in the near future.


In addition, GM executives are having to delay launching a number of their EV models such as the Chevrolet Equinox EV, the Chevrolet Silverado EV RST, and the GMC Sierra EV Denali.


Those launch delays have coincided with GM and Honda ending their billion-dollar joint venture to produce affordable EVs for Americans as well as markets in South America and China.

The end of that joint venture comes as demand for EVs among Americans has plummeted with the all-electric cars staying on dealership lots for an average of 65 days — way up from last year’s average of about 21 days.


“The American public is not ready for the broad adoption of electric vehicles. There are maybe 10 percent to 12 percent of people who really want an electric vehicle … the remainder still want internal combustion,” former GM executive Bob Lutz said this week.


Aside from potential customers, auto workers at GM have largely been turned off EVs and Biden’s green energy agenda that seeks to foist them on the American public. As part of its deal with GM, the UAW made sure to bring the automaker’s EV plants into its tentative contract so that workers will score higher wages than currently.


GM executives had hoped to keep auto workers at its EV plants out of such contracts. Also significant is the deal’s strike provision which gives GM’s employees the right to strike whenever the automaker closes one of its plants.


While GM stumbles, China is ready to flood the U.S. market with cheap EVs.


Breitbart News Senior Editor-at-Large Rebecca Mansour has long warned that without major investment in domestic manufacturing and auto workers, steep tariffs, and time for American automakers to adjust, China will dominate the EV industry.


“A Biden-led administration’s rapid push towards an all-electric future would rob U.S. auto workers of the advantage of experience and U.S. auto plants of the advantage of previously built manufacturing capacity,” Mansour wrote in October 2020. “… rushed and without tariffs, most of this will likely end up in China — just like all the rest of American manufacturing thanks to decades of failed trade policies like Joe Biden’s.”


China already has a major advantage over the U.S. in that it controls much of the EV lithium-ion battery supply chain including minerals such as nickel, graphite, lithium, and cobalt.

NOT HER MONEY! FOOLISH INVESTORS MONEY!

Mcs with clutch , has weights

$1650 shipped

This is a little outside the Hide's bailiwick, but we were offered an opportunity buy on these. We have in stock the Garmin Xero S1 Trapshooting Trainer, normally $999.99, available on our site for $499.99. As always, free shipping on all orders over $100.

Fuck 6% commissions!

As the title says I'm starting to research to find a scope that is a better fit for me than what's currently on my rifle (Vortex Diamondback tactical FFP).

• What is the platform for the scope? Ruger American Go Wild in 6.5C. Plan on something better in a couple of years and possibly a different caliber, .30-06, .300 win mag, or something else
• What cartridge are you shooting? 6.5 creedmoor
• What is your intended use for the scope? Whitetail deer, coyotes, ground hogs, etc.
• What type of conditions will you typically shoot in? Both daylight and low light situations.
• What are the typical distances you intend to shoot? typically between 50 to 250 yards. Have options for up to 400 yards, but would only consider that on a ground hog or coyote.
• Are there any specific specifications you would like? MOA reticle
• What is the price range you can afford? $900 to about $1300

As many can imagine the limiting factor me with my current scope is Chinese glass. It just doesn't work well in the last 20 minutes of shooting light. Currently I've been looking at the following:

Vortex Razor HD LHT

Bushnell Elite Tactical

Athlon Cronus

Trijicon Credo HX

Vortex Viper PST Gen2

Leupold VX-5HD

Primary Arms GLX Series

I’m still sorting out what I think some of my needs are. At the moment I would like to have a minimum maginification of 4x and possibly a max around 20x with a 50mm objective. I don’t think I will be dialing shots at different ranges so I would prefer to have a reticle setup with holdovers in MOA. I could go either way on FFP or SFP, but would probably lean more towards FFP. I’m not sure that I need locking turrets or zero stops or other features like that.

Based on some other threads that I’ve read I’m open to buying a better quality scope that’s used and in my budget vs a lower quality new one. I’ve been keeping an eye out in PX but I’m out of my element and knowledge in what brands and models to look for. So in I’m looking for real world experiences the scopes on my current short list and opinions on what should be on that list as well.

LR

Great LPVO just not shooting gas gun much anymore, glass is perfect will ship in original box and mount is 34mm tube, 1.5" height and 0 MOA (PN 05-405)

Scope alone: $$$SOLD
Mount alone: $225.00 shipped

For sale is brand new Vudoo V22 Three60. This was sent to Jonathan at Modacam and barreled with a Shilen Select Match barrel and finished at 25”. I just got this back from Jonathan last week but due to finances, I have to sell. It has not been shot once except the testing that Jonathan did. He sent me pics of his test groups (see picture, left is Midas and right is Tenex Match). it’s a shooter.

I would like to sell the complete rifle but am willing to part it out if I can get a buyer on the chassis and bipod. I’m going to sell the scope and mount in a separate listing. If you’d like the scope with it, add $1750

Specs are as follows:

Brand new Vudoo V22 Three60 w/ 30moa base
Triggertech Diamond Single Stage flat face
Shilen Select Match (16twist, ratchet, #7 Heavy Varmint. Same barrel as Womfat)
MDT ACC Elite Chassis in black w/ dampeners
MDT Ckye Pod (gen2, standard single pull)
Zeiss LRP S3 6-36x56 (ZF-MRi ret)
Audere Adversus Gen2 scope Mount
1 Factory Vudoo Mag
2 L3i gen 2 ultimate mags
Vudoo Bolt Assembly Tool
5 boxes Eley Tenex (different lots)
5 boxes Eley Match(different lots)
5 boxes Eley Team (different lots)


All items are brand new. I have all the original boxes and paperwork for all items. Also, have all original receipts and invoices.


If sold separately the prices would be as follows:

Barreled action (including the trigger and one factory Vudoo Mag) - $1975
Chassis (including dampeners) - $1375
Bipod- $500
Scope (including Audere mount) - $1900

Mile High Shooting Complete Rifle Build
Asking $7500.00 FIRM
Please only serious inquiries
Garland marked

Selling some of my night vision gear and other goodies, all prices are obo

1) L3 gen 3 Unfilmed WP pvs14 <150 hours
2633 photocathode response
36.1 SNR
72 lp/mm
1.9 ebi
.7 halo
SALE ON HOLD UNTIL I GET NEW HOUSING (cracked illuminator lens)

2) team Wendy exfil bump m/l $SOLD
3) Wilcox l4 g24 mount $SOLD
4) rqe universal bridge in fde $SOLD
5)rqe obverse shoe set oss $SOLD
6) kvc jamr $SOLD

7) peltor comtac 3 with PTT and radio $450

8) kestrel 5700 sportsman with AB and link and linkable Bushnell Elite 1 Mile rangefinder
$300

9) aimpoint t2 with unity mount $775

10) Steiner mini tor IR laser $150

I put this together for my nephew who has no interest in precision shooting. It’s a 700 action, timed and soldered bolt handle, with 20” 6.5cm Proof carbon barrel and 18” 6cm Bartlein. Both are threaded 5/8-24 and both were smithed by Adam Bentley. Less than 500 rounds. Seekins Precision 20moa rail, Timney HIT trigger, KRG Bravo stock with aluminum ARCA forend and aluminum LOP spacers. Atlas CAL bipod with RRS ARCA mount, Bushnell XRS2 with illuminated G3 reticle mounted in a NF magmount.

$3000 shipped

Every country on earth refuses to let these scum into their country. I do not doubt for an instant that FJB will truck in a few hundred thousand of these leeches into America. This is a typical result without a doubt.

Login to view embedded media

I've learned alot of these lessons over the years the hard way. A good list to review now and then.

Login to view embedded media

GA Precision Complete Build
Asking $15,000.00 FIRM
Please only serious inquiries

When choosing an ammo for competition (not practice), what would you focus more on? I tend to lean more towards ES over 100 shots, mostly because in a standard COF at an X match or PRS match your going to shoot 100-110 rounds. If my SD is low but my ES is what i would call high I'm assuming there are going to be a couple rounds out of that 100 that are going to be way off target. I could be wrong but just my thinking.

Thoughts?

Looking to sell, sorry no trades.

Hornady 106gr A-tips (6mm)
These are FACTORY SECONDS
1100 total(11-100ct boxes.)

Picked these up from Powder Valley last month or so to get by till my backorder shipment came in of my regular projectiles......the order came in so I won't end up needing these.

$450 shipped for all 1100.

Pp, venmo or pmo accepted for payment ( if using pp please add the fees or pay ff)

I would entertain selling in 2-500ct lots but prefer to sell as a single lot.

I have a few of Tab Gear's suppressor covers. Some of them started to fall apart. I've been trying to get a hold of them starting over a year ago for some warranty support

Anyone else had the quality issue and/or struggled to reach anyone at their office for support?