Area 419 Hellfire 6.5 (5/8x24)
asking 100
APA little bastard 6.5 (5/8×24)
Asking 120
Insite ARMs Heathen 6mm/30cal
(5/8x24) asking 120
MDT Comp break 6.5 (5/8x24)
Asking 200
Triggertech special 8-24oz two stage
Asking 200

AUGUST 21, 2023. LOWELL MASSACHUSETTS.

Just before the official business day closed today Monday, August 21, 2023, the Lowell District Court had reached it's verdict regarding Massachusett's overbearing gun laws and License To Carry (LTC) requirements. A state with gun laws similar to New York City, which have seen the arrests, incarceration, and fining of many unwary travelers who had carried their legally owned firearms across state/city lines, this case began when a New Hampshire man named Dean Donnell, who is licensed to carry in his home state, was arrested by Massachusetts state police during a routine traffic stop when MA troopers discovered that Mr. Donnell did not hold a MA LTC required to carry in the state of Massachusetts. Instead of taking plea deals or agreeing to reduced/dropped charges in exchange for a hefty fine, Mr. Donnell filed a case back at the state citing that the core principles of the Second Amendment had been violated with his arrest and detaining.

In the conclusion of this landmark case today, the Lowell District Court ruled that the State of Massachusett's ordinance barring law abiding concealed carriers from entering the state without a state LTC is UNCONSTITUTIONAL and violates the 2nd Amendment. In addition, they ruled that the arrest of Mr. Dean Donnell on these firearms charges was a violation of his civil rights and had subjected him to 'cruel and unusual punishment' because this issue should NOT have been a criminal issue and subject to criminal penalties. This verdict not only spells doom for Massachusett's blatant constitutional violations preying on law abiding citizens, but sets the groundwork to strike down all other states and localities with similar unconstitutional anti-gun laws. Today's victory is made possible by last year's groundbreaking New York State case NYSRPA (New York State Rifle and Pistol Association) vs. Bruen, which saw the Supreme Court strike down NY State and New York City's anti-CCW and pistol licensing requirements as unconstitutional.

Full coverage here:
NOTE: Due to how fresh this development is, having dropped in the last 2 hours, articles and online copies of the case docket and information are not yet available. This video provides a glimpse into the information that will be available online once they have been published and written about.

Login to view embedded media

Just picked up an MPA PMR Pro ii. Man does this rifle look good. A bit disappointed to see that my basic FAT torque wrench won’t fit one of the action screws. As far as I can tell only the $200 Fix-It Sticks MPA makes can fit. MPA recommends a torque setting of 65 inch lbs. My question is, do you think I need the fix it sticks to apply precisely 65 inch lbs? Or can I just take an Allen wrench and tighten it up about as far as I can by hand? I’m thinking if the recommended setting was lower say 20-25 inch lbs I can see why being precise is important but when I hear 65 inch lbs I get the sense that they’re really just saying make it real tight but it shouldn’t matter if you aren’t exact.

I am looking for a 2 stage AR15 trigger for a general use carbine. Want to spend between $80 to $150.

Currently have an ALG ACT single stage in the rifle and while smooth the pull weight is 6.75lbs. Would like to get it down to 3.5 to 4.5 lbs.

What would be a good smooth trigger in that price range?

Thanks

question,
when setting the die height, I put my ram all the way up, then screw down the full length resizing die until it touch's the ram and back off 1/2 turn?
Is this the correct setting? My reloads are sticking into the chamber where factory ammo is not.

The base of my re-sized case is .472, sammi dimension is .470. Should .002 excess cause a sticky situation?

New in box kahles 525 DLR.
3200 shipped takes it

Selling a used Daniel Defense Delta 5 Pro, 20", .308, HPALMA (1650 plus shipping to FFL)

*will come with the Area 419 muzzle brake. I took it off so I could run the rifle suppressed.

The DELTA 5 PRO is the product of innovation, world-class cold hammer forged barrels, and the custom enhancements that elevate this firearm to professional level. The DELTA 5 PRO in .308 delivers the science of accuracy with a SUB-MOA Guarantee.

Newcomers to long-range shooting, who seek camaraderie with friends, will find immediate success getting on target with repeatable hits. More experienced competitors will discover the DELTA 5 PRO’s rich feature set out of the box, is more than capable of performing as the shooter’s skill level advances. With the PRO’s base price within the Precision Rifle Series Production Division limit, compete with confidence whether you choose black, or for a little more, choose one of our Cerakote finishes (classified as an accessory in Section 2.3.5).
2.3.5 Accessories: For the purpose of the Production Division, the following items are considered accessories and will not be regulated or prohibited from being used on or in conjunction with your production rifle: muzzle brakes, barrel tuners, silencers, barricade stops/blocks, rifle weights, custom paint, rings, red dot sights, bags, pads, bipods, rails, zoom levers, data card holders, bolt knobs, bubble level, grips, handguards, etc.

***CR2 Shooting Solutions, LLC is a Training and Retail company. We are licensed to sell firearms accessories, optics and ammunitions. Any sales related to these type of items can and will be processed through CR2 Shooting Solutions, LLC retail store "www.cr2supplycage.com." We accept cash in person, or payments through our website.

However, we are not a Gun Shop or FFL. Any firearms listed on this site are privately owned by the owner of CR2 Shooting Solutions, LLC and will be sold as such.

For Sale is a Sig Sauer Cross PRS in 6.5CM ($1800 plus shipping to FFL)

This rifle has about 500rds on it. It was used for a product review and that's it.

Sig Sauer Cross-PRS Cerakote Elite Gray Bolt Action Rifle - 6.5 Creedmoor - The Sig Cross was designed and built from the ground up at the Sig Sauer research and development facilities in New Hampshire with the input of hunters, military snipers and elite long-range shooters. The Cross rifle was created to meet the demands of both precision long-range shooting and extreme back country hunting. The rifle features the lightest, most portable rifle in its class, folding precision-style stock, one piece receiver for increased accuracy, 2 Stage adjustable match trigger and a free floating M-LOK handguard. Designed and built in the USA.

***CR2 Shooting Solutions, LLC is a Training and Retail company. We are licensed to sell firearms accessories, optics and ammunitions. Any sales related to these type of items can and will be processed through CR2 Shooting Solutions, LLC retail store "www.cr2supplycage.com." We accept cash in person, or payments through our website.

However, we are not a Gun Shop or FFL. Any firearms listed on this site are privately owned by the owner of CR2 Shooting Solutions, LLC and will be sold as such.

Picked this up at a match this weekend.

Cert for a free barrel chambering and muzzle thread from GA Precision.

$SOLD

Venmo/Zelle/Paypal

I have a 1.20 krieger barrel on a rimx and 1.25 krieger on another rimx. 1.20 is 24 inch and 1.25 is 20 inch. Also have a 24 inch mullerworks mtu a 22 inch mullerworks mtu and a benchmark 22 inch mtu in vudoo and rimx actions. I seem to prefer the mtu contours more. I got caught up with the heavy profile barrels! But am leaning on the mtu profile! If you pick your chassis the mtu balances perfect. Is there something i am missing?

$3,500
Selling as I’m getting into Fclass type equipment and switching gear. I have shot primarily off bench or tripod or bipod on bench. This absolutely hammers. I’ve taken this to 2,025 yards and was hitting 24”x24” plate. This rifle could quickly become a 6BR or 22 Creedmoor if buyers wants that instead. Not ready to part out yet.
No trades unless you have a fclass type stock (Dima, Cerus, Shurley) inletted for Borden BRMXD.
There is a pic of light scratch marks under cheek piece which is how it shipped to me when new. Cheek piece came out and posts did it. Don’t see it with cheek piece in position

Will need to work out shipping and split actual cost as I’ve previously bought a cheap hard case in the past and then boxed and gone ffl to ffl.

Action: Impact 737 magnum bf, right hand, Area 419 bolt knob extension, APA bolt knob

Barrel: 7SAUM, Krieger 28”, Heavy Varmint, 8.5” twist, 3/4” muzzle, could include EC Tuner Brake but pictured is my TBAC brake which is not for sale. Throated long for 180 Hybrids COAL 3.090 to riflings. 390 rounds fired. Chambered by Joe Walls at Exodus.

Trigger: Trigger tech Diamond, single stage, curved

Stock: Foundation Impact inlet, ME1, dark distressed, Hawkins M5 bottom metal

*Not included is scope, rings, bipod unless we further negotiate price.

Selling two brand new unfired lone peak Fuzion actions. Short action black nitride standard bolt face(i.e. .308).

$1335 each, shipped to your FFL.

PayPal or Venmo FF only

- Pre-bankruptcy Remington 700 short action in 6.5 Creedmoor. Blue printed by LRI with fluted bolt by LRI.

- 18" Bartlein 1-8tw featherweight countour barrel.

- McMillan Hunter ADL stock, molded in Woodland Camo.

- Timney HIT trigger.

- Every part of the barreled action has been nitrided by H&M.

- Warne 20moa base

- Rifle weighs 7lbs 3oz as pictured

Asking $1650 shipped.

Electrician and resident pit comedians please help.
This is a water pump for an old lathe, high quality Chinese stuff from the 90s.
I gather it is 220 volts, 60 hertz?
I have single phase, three phase, as well as 480 three phase. I just need some help what this needs.
47.2 ohm between any two of the wires of the motor.
I have switched jumpers around before to change for different voltage, but there is always diagrams and tags in English.
I’ll post pics of the motor tag and the connection block inside the motor.
Can we make this work? Any more questions just ask.
Thanks!

So was a friend's place earlier today and he snagged these.

The back story (and he is going to get more detail) is that the seller's dad was a Marine and was in Alaska in WW2. But I could not get it clear whether he brought these back or acquired them on a later trip to Alaska in the 1950's.

First is a Model 70 which serial numbers to 1942 or so. Also caliber is marked ".30 Government" not .30-06. I did not look close enough to see a flaming bomb or ordnance mark. The story is that these were shipped to Springfield and then went to the Marines. But it's a story... and second hand at that.

Wartime guns may not have been sold to civilians as sporters... but they did get sold where there was a need. Forest rangers to security guards... heck could have ended up in Alaska in the hands of some guy protecting bulldozer operators on the Alaska Highway from bears. So not every model 70 was snipery. BUT... I know there are some guys here who know these way better than I do.

Scope is obviously not right. And recoil pad was added. This was a guy's New England Deer rifle for more than 50 years and shows it. So if anyone knows anything I can pass on to him! They didn't break the bank and so any news is going to be good and interesting.

Oh and to start, this pouch came with the rifle. I think it's WW1? But could easily have still been issued early in WW2.










On to the rifle. I posted the whole serial number because it may help with research.

Second gun is a trainer for, IIRC, a Springfield 1903? It is .22 Long Rifle Caliber. Has an applique cheek rest. Irons and an older scope.

I know literally nothing about this except it was acquired at the same time as the 70. And supposedly came from his father and was bought at the same time as the 70. First time I've ever handled one of these... so, again, you guys are the good source for info!











Do your knowledge magic, my vintage Ameegos!

Cheers,

Sirhr

From what I’ve gathered online: Originally the 2.5-10x24 was released for the military contract for the MK12 SPR, and then in 2015 NF did a limited run on them with the updated MOAR reticle.

I have a great condition NXS 2.5-10x24 with exposed turrets, MOAR 30 MOA SFP reticle, and I believe these had zero stop.


Comes with ARMS 22M rings and the 22 TRM diving board. Used this on my Mod H and Mod 1 briefly but probably hasn’t even seen 100 rounds. Keeping the MK4 since I had much more interest from people in the NXS.

True to my original asking price I will take $1400 shipped with the rings. No box. Scope is in great shape inside and out.

First come first serve since I had lots of people PM me when I posted my Mod H. USPS MO or bank cashiers check only on this one.

Thanks for looking.

I think this is the BR4 (let me know if there is a way to confirm) model with Arca Spec QD. Just sits in the safe so letting go. Excellent condition.

$225 Shipped!

For sale:
GA Precision(GAprecision.com)
Trued Remington 308 “G” prefix Action with a Jewell HVCR Trigger and Rock Creek 20” Heavy Fluted Barrel.
Badger Ordnance Scope Rail - Threaded 5/8x24 for the Badger Ordnance Brake.
Badger Ordnance Tactical Bolt Knob.
McMillan A4

Nightforce NXS 3-15x SFP MIL (Painted FDE by previous owner) Rings and Level. (Will not sell scope separately until rifle sells)

Rifle has approximately 500 rounds fired.

Two purchase configuration options:

Price for Rifle minus the Nightforce Scope, rings and Harris is only $WITHDRAWN Firm via CashApp, Zelle or PPFF(Or split fees 50/50) plus shipping to CONUS.
Or
Complete turn-key Package as pictured(No Mag) with NF Scope, Rings, Level and new Harris BiPod for $WITHDRAWN Firm via CashApp, Zelle or PPFF(Or split fees 50/50) plus shipping to CONUS.

Selling to recoup funds so sorry, but no trades. Thanks!

Please PM me with any questions. Thanks Hiders!

Found in the trash/dumpster?

Best I found was a dead hooker.

Hey all,

We're super excited to release the Oryx bipod! It's been something we've been working on to get out to you all!

Check it out!

Who can take Doxy-PEP?


Anyone who’s had unprotected sex, had experiences with STIs in the past, or had multiple partners could benefit from Doxy-PEP. While there are no age restrictions, parental consent might be required for minors, just like with STI testing. The pill may be especially useful for gay and bisexual men: According to the CDC, this population makes up a disproportionate amount of STI cases.


The treatment can also help give peace of mind to people who are trying to get pregnant and not using condoms, but still worried about STIs, says Davidov. However, he emphasizes it’s better to have sex with a partner who has tested negative for STIs.

Soooooo. The folks in red…..who are THESE people , any WHY?

Not new to reloading, but new to precision reloading. After hours and hours of reading and videos, kind of came up with a game plan and would like some input.

Plan on a Forester full size bushing die. Use a bushing to get neck tension to 0.003”, then use a mandrel die to open up to 0.002” of neck tension. I would hope this would help with concentricy and work any deformities out of the neck.
Input? Thanks

Used in great shape sfp. Bought it used and put roughly 400rds from a bench on it. Comes as shown with no barrel 1 aw mag and the thumb rest. Any specific pic just ask

$4100 shipped conus. Apple Pay zelle venmo pp f&f
$4400 shipped with a 24in 308 barrel by bugholes. Barrel not for sale separately
The only trade considered is a dta srs a2 with removable top rail

About 6 months ago I got my 16” SDM profile 223 Wylde 1:8 barrel that I ordered direct with WOA. I built it using a BCM upper (thermofit) that I trued the receiver face on and bedded with green Loctite. The handguard is a free floated SOLGM M89 and the I’m using a Riflespeed adjustable gas system with an H2 buffer in the stock. I’m using a LaRue MBT-2 trigger in the lower. The rifle has a NightForce NX8 2.5-20 scope on it. The rifle has been dead nuts reliable from day 1 and eats anything I put in it without issue.

The problem is that it’s not accurate, the best 5 shot groups being 1.2-1.3” (match quality factory ammo and some of my best hand loads). It has about 200-250 rounds through it. I have a Bartlein 20” SDM profile 1:7.7 4 groove by CLE that I built with the EXACT components and it shoots sub 1/2” 5 shot groups with multiple factory loads and a bunch of my hand loads.

Ive bore scoped this rifle and I saw two potential issues (see pictures):
1) There are radial machining marks left in the leade/throat area from when the barrel was chambered by WOA.
2) The gas port cuts through an entire groove and gets copper build up which shows as a single blue streak on my cleaning patches. The copper accumulation is also visible with a bore scope even after a heavy cleaning with JB + Kroil and Patchout+ accelerator.

I’ve sent an email to WOA to try to get some help. This rifle was not intended to be a blaster and I expect much better from this barrel. I have a Proof waiting in the wings to replace it if things don’t get resolved soon.

Ive posted the “put out or get out” results from my test of the WOA today, before this test I did the heavy cleaning, so the barrel was pristine. The top row, far right “55 ZMax TAC” was the first set shot with one of my best loads, the first three went into the same hole, the 4th was at 2 o’cloc, the 5 dropped 1.5”. I then shot the 69 FGM, then 73 FGM, then 77 FGM, then 53 VMAX. I then let the rifle cool down for 45 min or so and then shot AAC 77 TMK, then 77 SMK, then 77 OTM, then AAC 55 VMAX, and lastly another set of my 55 Zmax load (bottom right).

Thoughts on what the issues may be?

Thanks,

ZA