• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Range Report Ballistic AE .. what is it missing that you want..

Re: Ballistic AE .. what is it missing that you want..

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: shotdown</div><div class="ubbcode-body">Huge thanks to the op for making tons of updates for this app. I've been trying to get a free code for awhile for the AE version but it looks like I'll end up upgrading when I get back to the states. Either way, I'm loving this app more and more with every update.

ETA: I'm trying to understand "truing" correctly. If I want to "true" my data (using what I dial in on the scope), all I have to do is turn off "drop is relative" and type in my scope adjustments for the different distances? </div></div>

this is my understanding as well.
 
Re: Ballistic AE .. what is it missing that you want..

Hows come when I put in the 338 Lapua Cor-Bon 300gr SMK Load for the wind column I get INF? There isnt any place to put in wind Velocity on the Trajectory screen (tab at bottom) and I get INF in the HUD too even when I input a wind velocity. The 338 Lapua is the only one I notice that does it (of the rounds that I shoot).
 
Re: Ballistic AE .. what is it missing that you want..

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: whit</div><div class="ubbcode-body">Hows come when I put in the 338 Lapua Cor-Bon 300gr SMK Load for the wind column I get INF? There isnt any place to put in wind Velocity on the Trajectory screen (tab at bottom) and I get INF in the HUD too even when I input a wind velocity. The 338 Lapua is the only one I notice that does it (of the rounds that I shoot).</div></div>

Not following.. That load works fine for me.
 
Re: Ballistic AE .. what is it missing that you want..

3.7.1 was just released tonight; AE should follow soon. 3.8 is pending approval for iPad; once AE is approved, I'll submit the other two. A rather lengthy change log (on website).
 
Re: Ballistic AE .. what is it missing that you want..

Was it released for the iPod touch? Do you know what upgrades has been made?
 
Re: Ballistic AE .. what is it missing that you want..

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AshesToAshes</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: whit</div><div class="ubbcode-body">Hows come when I put in the 338 Lapua Cor-Bon 300gr SMK Load for the wind column I get INF? There isnt any place to put in wind Velocity on the Trajectory screen (tab at bottom) and I get INF in the HUD too even when I input a wind velocity. The 338 Lapua is the only one I notice that does it (of the rounds that I shoot).</div></div>

Not following.. That load works fine for me. </div></div>

I dont know whats going on. If I go to Trajectory (tab at bottom) then push on the arrow next to Ballistic Coefficient the push loads (tab at top) and go to 338 Lapua and do the Cor-Bon 300gr SMK then look at the Traj chart for the wind (both columns) it say "inf". If I save the load to favorites then go to HUD and put in a Wind Velocity then go to HUD screen the wind says "inf" for both Wind (in) and Wind (MOA) even if I change the Wind Speed slide on the same screen. I noticed if instead of doing the loads tab go to the Litz tab and do the .338>Sierra 300gr HPBT then do the same velocity as the Cor-Bon load everything works OK.
 
Re: Ballistic AE .. what is it missing that you want..

Unless ive missed it, a basic range card. One where i can imput pre-ranged targets with different symbols. clicking on each target on the range card could link to the firing solution for it in the HUD perhaps, or a popup next to it with simple dope. Somthing for really quick reference. Maybe being able to add simple terrain markings, notes, recording data.

similar to this...but more shooter orientated:

fig5-13.gif



And nice and shiny/user friendly like the rest of Ballistic AE.
 
Re: Ballistic AE .. what is it missing that you want..

uhm, that's what the target log is for
 
Re: Ballistic AE .. what is it missing that you want..

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: whit</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AshesToAshes</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: whit</div><div class="ubbcode-body">Hows come when I put in the 338 Lapua Cor-Bon 300gr SMK Load for the wind column I get INF? There isnt any place to put in wind Velocity on the Trajectory screen (tab at bottom) and I get INF in the HUD too even when I input a wind velocity. The 338 Lapua is the only one I notice that does it (of the rounds that I shoot).</div></div>

Not following.. That load works fine for me. </div></div>

I dont know whats going on. If I go to Trajectory (tab at bottom) then push on the arrow next to Ballistic Coefficient the push loads (tab at top) and go to 338 Lapua and do the Cor-Bon 300gr SMK then look at the Traj chart for the wind (both columns) it say "inf". If I save the load to favorites then go to HUD and put in a Wind Velocity then go to HUD screen the wind says "inf" for both Wind (in) and Wind (MOA) even if I change the Wind Speed slide on the same screen. I noticed if instead of doing the loads tab go to the Litz tab and do the .338>Sierra 300gr HPBT then do the same velocity as the Cor-Bon load everything works OK.</div></div>

I've tried, but just can't reproduce this. You might try resetting defaults, or perhaps even consider deleting the app and reinstalling with a fresh set of preferences.
 
Re: Ballistic AE .. what is it missing that you want..

Can I reinstall it without having to buy it again? I am new to this app stuff, this is actually the first App I have ever bought. I bought a iPod touch just so I can get this app.
 
Re: Ballistic AE .. what is it missing that you want..

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AshesToAshes</div><div class="ubbcode-body">uhm, that's what the target log is for </div></div>

Works differently, its more a reference card for multiple targets. Unless im looking at the wrong target log?

Range log/Target data sheet?
 
Re: Ballistic AE .. what is it missing that you want..

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 2/1_Kiwi</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AshesToAshes</div><div class="ubbcode-body">uhm, that's what the target log is for </div></div>

Works differently, its more a reference card for multiple targets. Unless im looking at the wrong target log?

Range log/Target data sheet?</div></div>

You can do something similar (but not exactly) in the range log; if you change the name of the range log title, it will prompt you to copy or move it... if you copy it, you can easily create multiple range log entries per visit... but that doesn't summarize everything per card. The left pane does a decent job of organizing your data though; i'd think that every shoot / ammo in your visit would/should get a separate record.
 
Re: Ballistic AE .. what is it missing that you want..

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: whit</div><div class="ubbcode-body">Can I reinstall it without having to buy it again? I am new to this app stuff, this is actually the first App I have ever bought. I bought a iPod touch just so I can get this app.</div></div>

As long as you download it from the same itunes account, it should let you download it for free.
 
Re: Ballistic AE .. what is it missing that you want..

All versions of 3.7.1 have been approved; 3.8 is now pending approval. It's so much smoother than previous versions due to both memory optimizations and target log improvements. I think you'll like it. Change log on website.
 
Re: Ballistic AE .. what is it missing that you want..

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: clayne_b</div><div class="ubbcode-body">Any plan on releasing this for the android market?</div></div>

No, sorry.
 
Re: Ballistic AE .. what is it missing that you want..

Damn that sucks, will this software work on an original Iphone? I have one kicking around...
 
Re: Ballistic AE .. what is it missing that you want..

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: clayne_b</div><div class="ubbcode-body">Damn that sucks, will this software work on an original Iphone? I have one kicking around... </div></div>

It requires at least iOS 4.3.5, though I recommend iOS 5 or 6. I think that means you'll need at least an iPhone 3G, although a 3GS would probably be much faster.
 
Re: Ballistic AE .. what is it missing that you want..

Been messing around in it a bit more.... Using some of the features for the range/target log and the range finder.....

I couldn't go back to edit a shot in the log..... It asked to delete or toggle..... I wanted to edit score and maybe anything else.... Am I missing something?

Rangefinder- it would be nice to have reticle options- I use USO's PCMOA and MOA Type 1 reticles which are IPHY..... I hate to say it as I know this is a mostly MIL loving audience..... But having the option to change to your specific ret. would be great......
 
Re: Ballistic AE .. what is it missing that you want..

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Sniper1*</div><div class="ubbcode-body">Been messing around in it a bit more.... Using some of the features for the range/target log and the range finder.....

I couldn't go back to edit a shot in the log..... It asked to delete or toggle..... I wanted to edit score and maybe anything else.... Am I missing something?

Rangefinder- it would be nice to have reticle options- I use USO's PCMOA and MOA Type 1 reticles which are IPHY..... I hate to say it as I know this is a mostly MIL loving audience..... But having the option to change to your specific ret. would be great...... </div></div>

I'd take that a stage further and have a selection of reticles with hold-overs for various distances.
 
Re: Ballistic AE .. what is it missing that you want..

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AshesToAshes</div><div class="ubbcode-body"> <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: whit</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AshesToAshes</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: whit</div><div class="ubbcode-body">Hows come when I put in the 338 Lapua Cor-Bon 300gr SMK Load for the wind column I get INF? There isnt any place to put in wind Velocity on the Trajectory screen (tab at bottom) and I get INF in the HUD too even when I input a wind velocity. The 338 Lapua is the only one I notice that does it (of the rounds that I shoot).</div></div>

Not following.. That load works fine for me. </div></div>

I dont know whats going on. If I go to Trajectory (tab at bottom) then push on the arrow next to Ballistic Coefficient the push loads (tab at top) and go to 338 Lapua and do the Cor-Bon 300gr SMK then look at the Traj chart for the wind (both columns) it say "inf". If I save the load to favorites then go to HUD and put in a Wind Velocity then go to HUD screen the wind says "inf" for both Wind (in) and Wind (MOA) even if I change the Wind Speed slide on the same screen. I noticed if instead of doing the loads tab go to the Litz tab and do the .338>Sierra 300gr HPBT then do the same velocity as the Cor-Bon load everything works OK.</div></div>

I've tried, but just can't reproduce this. You might try resetting defaults, or perhaps even consider deleting the app and reinstalling with a fresh set of preferences.
</div></div>


I'm getting the same thing with one of my loads. With the other load it works fine, but with this one taht is very similar it ways wind INF in inches and mrad.
 
Re: Ballistic AE .. what is it missing that you want..

Are you using spin drift? What bullet length is specified for the 300gr?
 
Re: Ballistic AE .. what is it missing that you want..

3.9 adds a standard 60 MOA reticle for the rangefinder. It also has an option to display come-ups instead of +/- in the HUD, and allows you to opt to hide the path in inches in exchange for a much larger elevation / windage display. There are also a lot of bugfixes.
 
Re: Ballistic AE .. what is it missing that you want..

Some images from 3.9 (3.8 will be out in a few days - that's how far behind Apple is)

moa_reticle_iphone5.png


hud_ae_iphone5.png
 
Re: Ballistic AE .. what is it missing that you want..

And yes, there's a precision setting that lets you decide how many decimal places to show.
 
Re: Ballistic AE .. what is it missing that you want..

On the HUD i would rather know if my bullet is still ballistic at desired distance than know my zero which doesn't change and adds little value in a HUD view. Just saying.
 
Re: Ballistic AE .. what is it missing that you want..

define "is still ballistic" please? Do you mean supersonic?
 
Re: Ballistic AE .. what is it missing that you want..

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AshesToAshes</div><div class="ubbcode-body">define "is still ballistic" please? Do you mean supersonic?
</div></div>

Yes. I want to know my MV at the range i have selected ie 800 yrds it reads 1400 fps, 1,200 yards it reads 1,050...it would be helpful if when subsonic the colour changed to red from blue or green...it becomes a visual alert/note. I think that is more helpful than knowing where my zero is which for 95% of everyone on this forum is 100-yrds anyway.
 
Re: Ballistic AE .. what is it missing that you want..

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TJ.</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AshesToAshes</div><div class="ubbcode-body">define "is still ballistic" please? Do you mean supersonic?
</div></div>

Yes. I want to know my MV at the range i have selected ie 800 yrds it reads 1400 fps, 1,200 yards it reads 1,050...it would be helpful if when subsonic the colour changed to red from blue or green...it becomes a visual alert/note. I think that is more helpful than knowing where my zero is which for 95% of everyone on this forum is 100-yrds anyway. </div></div>

+1
 
Re: Ballistic AE .. what is it missing that you want..

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TJ.</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AshesToAshes</div><div class="ubbcode-body">define "is still ballistic" please? Do you mean supersonic?
</div></div>

Yes. I want to know my MV at the range i have selected ie 800 yrds it reads 1400 fps, 1,200 yards it reads 1,050...it would be helpful if when subsonic the colour changed to red from blue or green...it becomes a visual alert/note. I think that is more helpful than knowing where my zero is which for 95% of everyone on this forum is 100-yrds anyway. </div></div>

Done. There's enough room to fit all three and then some.
 
Re: Ballistic AE .. what is it missing that you want..

I'd like to add my thanks for your responsiveness to our requests. Among the apps I own, yours is very quickly rising to the top and leaving the others far behind.
 
Re: Ballistic AE .. what is it missing that you want..

I own both ipad and iphone versions. Not only is the response here amazing, but his email responses are as fast as any developer I've ever met.

Great product. Now if you can only make my iphone take pressure, windspeed/direction, rH, and altitude readings without needing to be on the network since my shooting AO has no signal.

Then it would be perfect.

Oh can you make it tell me when to pull the trigger in between heart beats?
wink.gif


Seriously, its that well developed.
 
Re: Ballistic AE .. what is it missing that you want..

3.8 is now officially released. 3.9 is pending in the App Store. See website for change log.
 
Re: Ballistic AE .. what is it missing that you want..

Sorry if this is a stupid question.. But do the updates come free? of is there a cost associated with upgrading with every new build?
 
Re: Ballistic AE .. what is it missing that you want..

I have the app for my IPhone and really like it. One quick question - Is it possible to change the settings on the reticle on the Rangefinder to show MOA instead of Mil. If so, how do I do it?
Thanks again for a great product.
Phil G
 
Re: Ballistic AE .. what is it missing that you want..

Just started playing with the new features on 3.8. All I can say is awesome. Ballistic is by far the best shooting app and just getting better. Thanks for the continued development and support
 
Re: Ballistic AE .. what is it missing that you want..

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Phil G</div><div class="ubbcode-body">I have the app for my IPhone and really like it. One quick question - Is it possible to change the settings on the reticle on the Rangefinder to show MOA instead of Mil. If so, how do I do it?
Thanks again for a great product.
Phil G </div></div>

3.9 will have an MOA reticle you can select in settings.
 
Re: Ballistic AE .. what is it missing that you want..

Is it possible to scale target in cm?
It is in ppi now but have no idea what it is.
Rhanks for the great jpb you are doing.
jp
 
Re: Ballistic AE .. what is it missing that you want..

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jp67</div><div class="ubbcode-body">Is it possible to scale target in cm?
It is in ppi now but have no idea what it is.
Rhanks for the great jpb you are doing.
jp
</div></div>

Do you know what caliber you're shooting? You can multiply the PPI of covering the bullet hole into 1". For example if you're shooting .338, cover the hole then multiply the PPI by 1/.338. I might change the scaling to support that as an alternative as there aren't a lot of metric targets with a standard x ring size
 
Re: Ballistic AE .. what is it missing that you want..

Caliber is in inch. No problem with this as it is 0.224, 0.260 and so on.
But am i not suppose to move the ruler on a specific known portion of the target ?
Thanks
 
Re: Ballistic AE .. what is it missing that you want..

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jp67</div><div class="ubbcode-body">Caliber is in inch. No problem with this as it is 0.224, 0.260 and so on.
But am i not suppose to move the ruler on a specific known portion of the target ?
Thanks
</div></div>

So 1 / .224 is 4.464 so cover the bullet hole with the ruler. Then take the PPI and multiply it by 4.464 and enter the new PPI by tapping on the field. This SHOULD work.
 
Re: Ballistic AE .. what is it missing that you want..

Not sure if it has been asked but any chance that you'll give people the option to upgrade from the Ballistic Standard app to the AE version??
 
Re: Ballistic AE .. what is it missing that you want..

The closest thing I can do is in app purchases which there are three. Anything more than that and you'd need to buy the AE version. Apple isn't set up to upgrade across two different store items.
 
Re: Ballistic AE .. what is it missing that you want..

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AshesToAshes</div><div class="ubbcode-body">The closest thing I can do is in app purchases which there are three. Anything more than that and you'd need to buy the AE version. Apple isn't set up to upgrade across two different store items. </div></div>
I see. Thanks and keep up the awesome work.
 
Re: Ballistic AE .. what is it missing that you want..

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AshesToAshes</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jp67</div><div class="ubbcode-body">Caliber is in inch. No problem with this as it is 0.224, 0.260 and so on.
But am i not suppose to move the ruler on a specific known portion of the target ?
Thanks
</div></div>

So 1 / .224 is 4.464 so cover the bullet hole with the ruler. Then take the PPI and multiply it by 4.464 and enter the new PPI by tapping on the field. This SHOULD work. </div></div>
Are you by chance, going to set some ruler in metric?
That would be easier for us "metric" guys.
Thanks
 
Re: Ballistic AE .. what is it missing that you want..

The problem with metric is most metric targets don't seem to have a standard size for an X ring, like imperial targets do. Most rings in the US are 1" or 1/2" or 2", or some multiple of an inch, so it can be easily scaled. I don't see anything like that in metric.
 
Re: Ballistic AE .. what is it missing that you want..

I've added the "scale by caliber" functionality to version 3.A which should be submitted as soon as 3.9 is approved
 
Re: Ballistic AE .. what is it missing that you want..

I've just updated , all seem to work will except truing keeps crashing, anyone else experiencing this?
 
You must log in or register to reply here.

Similar threads

A
Here's everything you missed last week
Replies
18
Views
1K
The D
The D
S
What about FN .264 LICC?
Replies
132
Views
7K
WindstormSCR
WindstormSCR
Jack Master
Holly Smokes!! That Really Worked!! Speed Drop.
Replies
57
Views
7K
hseII
hseII
Glassaholic
Rifle Scopes Alpha Class Long Range Scope Review - TT, ZCO, Schmidt, March, Vortex
Replies
206
Views
26K
Dutch308
D
C
Cheap .223 Progressive Precision Project (Lee Auto Breech Lock Pro & Redding BR-30)
Replies
1
Views
1K
Codiekfx400
Codiekfx400
Top Bottom
Back