That's the deeper version of the sear which we went away from.
If you've got decocking issues, updating the cocking piece will be worse for the system.
Please email me directly ([email protected]) and we'll come up with a game plan.
Thank you - Ray
If you've got decocking issues, updating the cocking piece will be worse for the system.
Please email me directly ([email protected]) and we'll come up with a game plan.
Thank you - Ray
Can someone measure the width of their RimX bolt, AND the inner diameter of their action? I would like to compare it to mine. Any help would be appreciated!
Last edited:
Yes of course. I would still appreciate input from forum members if possible in the meantime.
Last edited:
The bolt is 0.695” on mine. I’m having a hard time measuring the inner diameter.
Update: Emailed back & forth with Ray and he sent me a new firing pin assembly to try. Swapped it out but had to increase trigger pull on the TT Diamond a lot more than I would like. So I decided to try a different trigger. I have had very good luck with the JARD triggers in my CZ457's so I decided to try their competition trigger 1.5 to 3oz. Clone of the Jewel trigger which I'm a fan. Installed it today & it's set at 2.5oz. Ran tests with snap caps & was able to put a few rounds downrange. Worked just fine every time. I do like the flat trigger on it.
Similar threads
