That's the deeper version of the sear which we went away from.
If you've got decocking issues, updating the cocking piece will be worse for the system.
Please email me directly ([email protected]) and we'll come up with a game plan.
Thank you - Ray
If you've got decocking issues, updating the cocking piece will be worse for the system.
Please email me directly ([email protected]) and we'll come up with a game plan.
Thank you - Ray
Can someone measure the width of their RimX bolt, AND the inner diameter of their action? I would like to compare it to mine. Any help would be appreciated!
Last edited:
Yes of course. I would still appreciate input from forum members if possible in the meantime.
Last edited:
The bolt is 0.695” on mine. I’m having a hard time measuring the inner diameter.
Update: Emailed back & forth with Ray and he sent me a new firing pin assembly to try. Swapped it out but had to increase trigger pull on the TT Diamond a lot more than I would like. So I decided to try a different trigger. I have had very good luck with the JARD triggers in my CZ457's so I decided to try their competition trigger 1.5 to 3oz. Clone of the Jewel trigger which I'm a fan. Installed it today & it's set at 2.5oz. Ran tests with snap caps & was able to put a few rounds downrange. Worked just fine every time. I do like the flat trigger on it.
Same — ray sent me a new bolt body as well that is flawless. From notification of the issue (to Ray) to arrival of the new bolt body was 3 days. Excellent customer service.
Recently started shooting my RimX again, had Mike Manzella spin up 25” Ace 1.20. Other than the barrel everything is original from 6ish years ago, this thing runs and shoots like a Swiss watch. Since the rebarrel I’ve put maybe 2000 rounds through it, 2 competitions, not one hitch, nothing, an absolute pleasure to shoot.
Just out of curiosity, what chassis do you use? Mine is in a vision with some plastic tape in the mag well and runs perfect for many years as well.
MPA Vanquish, I’d originally had it in a Gen 1 MDT ACC with a Proof 22” comp contour, it ran fine just not as accurate as my Vudoo and not balanced correctly. This current config just rocks.
Last edited:
Similar threads
