• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

260

  1. Y

    Firearms (SOLD) Altus .260 TL3 MANNERS MK5

    Fellas, I had this built up w intentions to shoot it a bunch, two years later, kids and life later, and it’s got 45 rounds of PRIME thru it. Altus built it. Bighorn TL3, T4A MINI CHASSIS GAP CAMO, proof 24” sendero. FANTASTIC shooter w factory prime 130, you could hand load and it would really...
  2. Snaz

    SOLD SOLD: Lapua 260Rem brass primed w/Federal 210 LRP

    I have one box of 100 Unfired Lapua 260 Remington brass that's been chamfered & primed with Federal 210 large rifle primers. $130 PayPal F&F, shipped USPS Flat Rate w/signature confirmation.
  3. skulldragr17

    WTB WTB Lapua 260 Rem Ammo

    Looking for 260 Rem Lapua match ammo. Not picky on grain. Pic for attention.
  4. B

    Range Report 147gr ELD-M Long Range Test

    I managed to get out the other day with my .260 and test my new 147gr ELD-M load at longer range; initial results are promising... http://youtu.be/mZvjcMGA33w
  5. S

    bullet jump recomendation for 140gr Remington 260 load

    Hi All I need bullet jump recommendation for 140 class bullets. My bullets are: Hornady Match 140gr Sierra Match King 142gr Lapua Scener 139gr I am running Lapua Brass WLR primers IMR 4350 powder at 42.3 and 42.6 grains 28" CBI barrel, Savage Action This pushes the bullets out of...
  6. M

    260 Rem. 16" barrel too short?

    I have been going back and forth between a 308 and 260 for some time and thought I should try and get some input from people with first hand experience. I would like an AR set up with a 16" barrel so it would still be maneuverable with my can on it, which round would be the best in this short...
  7. C

    260 T3 Sporter at 1010m

    Sharing my 5.4" five shot group at 1011m from this weekend. Range has a bank of 1m square plates with 30cm round suspended in the middle. Using a factory standard Tikka T3 Sporter in 260. Lapua 136gr at 2750fps from 24" factory barrel. Steiner 5-25 Military in Spuhr mount. Ase S7 338...
  8. savageeaglenavy

    How to get the best accuracy and LR capabilities from my POF 308

    I have a POF 20 inch 308 and I'm curious to see what are the upgrades that I can do to increase the long-range capabilities and accuracy of this gun. My thoughts are leaning towards changing the caliber to a 260. One thing I would also like to do is to reduce the weight of the gun by changing...
  9. R

    260 Remington in Bolt guns.

    Well I finally pulled the trigger and bought a Sako model 85 in 260 Remington. Yeah, I know, it's not ubber tacticool, but it's a starting point. I got a good deal on it and it has a hair under 23" of barrel in 1/8 twist. I found a couple boxes of ammo online and got the glass close...
  10. kcshooter

    gap ar-10 260 remington loads

    I am about ready to load for my 260. I have 139 grain lapua scenar bullets and h4350 powder with cci br2 primers. The gun is a gap ar-10 with a 1-8.5 twist 22" bartlein barrel. What would be a good starting load? Thank you in advance.
  11. C

    Factory .260?

    Does anyone offer one? I like my Savage but it doesn't look like they offer any .260 rifles. Is this still to new of a caliber?
  12. 4Rail_Gunner

    260 Rem Neck Tension

    How much neck tension are you guys running on a 260 Rem. Using Rem Brass, outside loaded Diameter shows around .291" Would a .288 Bushing be to much neck tension? Will be loading from a AICS Mag. Thanks
  13. kcshooter

    help 260 or 308

    I am purchasing a used gap ar10 in 260 today. I am on the fence on keeping the 260 or rebarreling it to 308. I have a lot of 308 bullets, powder, and brass on hand and no more 308 to load them for. Should i keep the 260 and sell the 308 reloading supplies or rebarrel and sell the 260 barrel...
  14. C

    Gunsmithing .223 to .260 conversion

    Whats needed? I have a Savage 10FP in .223 and I was reading great things about the .260 round. Obviously a new barrel. What about the bolt?
  15. kcshooter

    260 rem load for a gap 260

    Does anyone have a good load for a 260 gap ar10.
  16. kcshooter

    260 remington loads with re-15

    Does anyone have any 260 loads that they use re-15 with.
  17. kcshooter

    Gunsmithing 260 to 308?

    I found an ar10 in chambered in .260. Can you turn it into a .308? Thanks in advance
  18. ranger1183

    6.5-08 vs. 260 Rem?

    Any idea why Quick Load has such significant pressure differences between 6.5-08 and 260 Rem? I thought they were one in the same creature. No?
  19. tschiemer

    260 vs. 308 ?

    For someone who does not reload, is the .260 hornady offering at present as accurate as the 175 gr fed gold match in .308? The rifle will be a GAP, and the caliber is the question. The range will be from close in hunting ranges with a primary purpose of target shooting F class, 1000 yards. I...
  20. hueys66

    260 Loads Only

    How about just a 260 thread? Be thorough on data.