problem

Ok guys and gals my gun is a complete aero precision with a new proof research barrel. The bolt is a complete 6.5 Grendel aero bolt. And sometimes when I close the bolt shut I have misfires it leaves a small primer mark on the primer and when I go to eject the case it stays in the barrel till I...

Not sure where I went wrong, I watched so many videos, got advice on here, took every precaution I could, and now the barreled action is stuck in the stock. Here’s the setup zermatt origin, manners TA elitetac, Hawkins Hunter dbm Here’s what I did: taped a few inches forward of the action to...

This is my first 308 build and its been nothing but headaches. I have the JP gas block adjusted almost all the way out. I have about ten rounds through it and have only gotten it to eject twice. It has yet to pick up another round. Im thinking my spring is too strong or something is up with the...

Hello all, I have a JP LRP-07 on order in 6.5 Creedmoor and have started gathering reloading materials. I have ordered a Redding Type S Full Length Bushing Die, but I just received an email from Redding in which they do not recommend using bushings in conjunction with semi-autos. The reason...

I have a DPMS G2 Hunter. .308 with a 20" barrel. I went to the range today and had a shitty day. Let me start 3 weeks ago... I shot my rifle for the first time 3 weeks ago. I bought 2 boxes of PMC 147 grain .308 and 2 boxes of Federal 149 grain 7.62x51. The PMC worked great with zero...

Hello, Long time forum lurker here and been on the site for a long time. Love Snipers Hide forums and some of the best information on the web. I would have likely continued to lurk forever, but finally found a problem I just simply cannot answer for myself. So, in a new post, I have a...

I just recently recieved my trijicon ACOG 4x32 from the company, i sent it in because i turned the windage dial to far and popped it....:rolleyes:. but now at 100 yds i get 3 inch groupings on my AR-15. when i remember sighting it in perfectly before. Some guy there told me that you hit the...

I finally got in the A5 that I ordered for my aac-sd from thirdgenshootersupply. Not sure if im sold on the stock yet or not. It feels comfortable, but I didn't know sniper fill was so damn heavy. Anyway, Im having trouble getting my action installed properly. My stock is inletted for a...

Sigh. My optics saga continues. I just got a new Monarch X 2.5-10x44. I really thought this would be the one. The clicks were very positive, bright optics, etc. Well, just took it out for the first time. It zeroed just fine @100, but when I did a box test, something odd came up- a perfect...

Just noticed that the right hand leg (thicker portion) of the horizontal post on my ACOG is getting blurry and almose see through. Left side and vertical post are absolutley fine and sharp. Whne I move my head around (closer to eyepiece and from side to side) the post sharpens up again. The...

the BO 20moa base I have for my 700SA LH has an extension that hangs about 1" out over the recoil lug and barrel. This is preventing me from pulling my new ST-10 back far enought to get proper eye relief because the bottom side of the objective hits this extended portion of the rail. Has anyone...

I was putting together a .308 dpms lower for a rifle I'm building and ran into a problem. The screw for the bolt catch mechanism which appeared to be a 1/16" allen head seemed to strip out (not the threads the head). I turned it all the way in and was NOT putting a lot of pressure on it and it...

Got this in a email today. Coyote Population The Alberta Government and the Alberta Forest Service were presenting an alternative to Alberta ranchers for controlling the coyote population. It seems that after years of the ranchers using the tried and true methods of shooting and/or trapping...

Zero'd my new USO/Horus today, then shot three rapid-fire dot drills of five shots in ten seconds. I find the 3/8 Dot targets are great for zero work - I thought I had to adjust one more tenth of right windage, but the dots told me I have trigger issues with my third and fourth shots in a string:

I took my rifle apart today because I thought the accuracy had diminished (but still pretty good). I noticed that the rear screw hole was cracked right down the middle of the rifle from the magazine well back to the trigger area and it’s all the way through. I guess I had over tightened the...

Got a custom build back, 7mm WSM, Krieger MTU, surgeon action. I shot it , reloaded by neck sizing only, shot some more, then sent the brass to Warner Tool so he can make me a custom insert for my warner die. He said that it definitely was not a standard 7 WSM chambering after carefully...

I went to the range today with my SPS .308. It is in a B&C stock and otherwise stock. I noticed that some of my groups were on the large side but others were damn near all in the same hole. The groups tended to have some in one area and other in another small area. I started looking when I...

OK, let me start off by saying that the purpose of this thread is not to debate or bash Leupold. I personally own 3 Leupold MKIV's and have never, ever had a single problem with any of them. Now to the problem. I got a loaner scope (Leupold MKIV M1) that a friend graciously lent me while I...

...I'm omitting the brand & model of this scope until I hear from their Customer Service dept. on Monday. I will say that it is from a respected maker & is carried by a couple of dealers who frequent this site. Universal feedback is that the glass is excellent & the company is top notch for...

Had a Pacnor barrel installed on my 280 AI. Trimmed all my brass to 2.525". 168 gr sierra hpbt seated .010 off the lands. At first I thought the necks spliting was due to work hardening, but then I noticed the ring around the neck. The neck also has a slight taper on the end starting at the...